R-0012-C Taylor Technologies Hardness Reagent | 2 Oz Bottle for Calcium Testing

The Taylor R-0012-C Hardness Reagent is a 2 oz liquid testing solution engineered to measure calcium hardness levels in swimming pools and spas. As an integral component of Taylor's water analysis kits, this reagent works alongside other Taylor solutions to deliver precise hardness readings. Supplied in a dropper bottle for controlled, drop-by-drop dispensing, it is formulated to produce reliable results that support proper water chemistry...

R-0013-C Cyanuric Acid (CYA) Testing Reagent by Taylor | 2 oz Bottle

Maintain precise awareness of your pool's stabilizer concentration with this 2 oz cyanuric acid testing solution from Taylor Technologies. Serving as a drop-in replacement for depleted reagent bottles, R-0013-C works seamlessly with a wide range of Taylor testing kits to deliver accurate cyanuric acid readings in both pool and spa applications. Because cyanuric acid acts as a sunlight shield for chlorine, keeping its levels in...

R-0013-F Cyanuric Acid (CYA) Testing Reagent by Taylor | 1 Qt. Bottle

Keep your chlorine stabilizer levels in check with this 32 oz (1 quart) cyanuric acid testing solution from Taylor Technologies. Engineered for use alongside compatible Taylor test kits, R-0013-F lets you verify that cyanuric acid concentrations remain within the proper range, which is vital because this stabilizer shields chlorine molecules from sunlight breakdown, extending sanitizer lifespan and boosting water hygiene. For optimal shelf life, keep...

R-0600-A Orthotolidine OTO Chlorine Reagent by Taylor | 0.75 Oz. Bottle

Stay on top of your pool's sanitation with the Taylor Orthotolidine Reagent in a 0.75 oz dropper bottle, formulated for use with Taylor residential water testing kits including the K-1000 and K-1003. This reagent lets you quickly gauge total chlorine levels in pool and spa water, a critical measurement for confirming that your disinfection system is keeping the water safe for swimmers. Preserve the reagent's...

R-0718-A Silver Nitrate Reagent by Taylor Technologies | 0.75 Oz Bottle

The Taylor R-0718-A Silver Nitrate Reagent is a 0.75 oz testing solution formulated for argentometric analysis of sodium chloride (salt) concentrations in pool and spa water. Intended for use alongside Taylor's R-0630 reagent and a calibrated testing tube, this solution contains 15-25% silver nitrate and is dispensed from a precision dropper bottle for controlled, drop-by-drop application. As a vital part of Taylor's saltwater testing lineup,...

R-0871-C FAS-DPD Chlorine Titrating Reagent by Taylor | 2 Oz. Bottle

Gain laboratory-caliber insight into your pool's sanitizer levels with the Taylor FAS-DPD Titrating Reagent in a 2 oz dropper bottle. When deployed together with DPD Powder (R-0870) and DPD Reagent #3 (R-0003), this reagent powers a precise drop-count titration that reveals both free and combined chlorine concentrations, giving you the data necessary to maintain ideal water conditions and protect swimmers. To keep the formula performing...

R-0980-A Phosphate Reagent #1 by Taylor Technologies | 0.75 Oz Bottle

Stay ahead of algae problems by tracking phosphate concentrations with the Taylor Phosphate Reagent #1 in a 0.75 oz dropper bottle. Formulated for use with Taylor test kits, this reagent delivers precise phosphate readings in pool and spa water, which is critical because elevated phosphate levels feed algae blooms and diminish the performance of your sanitizing chemicals. For lasting potency, store the bottle at a...

R0013203 Jandy Pressure Switch Replacement for JxiQ Pool Heaters

Safeguard your JXiQ heater against low-flow and dry-fire conditions with the genuine Jandy Pressure Switch R0013203. Designed as a factory-original safety device for JXiQ series models 200, 260, and 400, including ASME-certified units, this precision switch continuously monitors water pressure within the heater plumbing. It authorizes ignition only after confirming adequate water circulation and immediately initiates a protective shutdown if flow drops below safe thresholds....

R0327301 | Jandy FloPro Pump Union Kit | 2" x 2" | 2-Pack

Achieve a watertight plumbing connection on your Jandy FloPro or VS-FHP series inground pool pump with the Jandy Union Kit (R0327301). This factory-original two-pack delivers everything you need — two tailpieces, two union nuts, and two O-rings — for a professional-grade seal on both the suction and discharge sides of the pump. Each tailpiece measures 2 inches by 2 inches to match standard pool plumbing...

R0358000 Jandy DEV and DEL Filter O-Ring Replacement Kit

Keep your Jandy D.E. or cartridge filter sealed tight with the genuine R0358000 O-Ring Kit. This set provides premium replacement O-rings sized to fit DEV, DEL, CL, and CV series filter housings, restoring a leak-proof barrier that preserves filtration pressure and water clarity. Made from resilient elastomer compounds that resist degradation from chlorine and other pool sanitizers, these O-rings hold their shape and sealing force...

R0359300 | Jandy DEV60 & DEL60 Filter Tie Rod Kit With Knob and Lock Nuts

The Jandy Tie Rod Kit (R0359300) delivers a complete internal fastening solution for DEV60 and DEL60 DE filter models. This assembly anchors the filter grid stack securely inside the tank, ensuring each grid stays perfectly positioned for maximum debris capture and water clarity. Built from tough, chemically resistant materials, every component in the kit — the rod, washers, locking nut, and knob — is engineered...

R0359400 | Jandy DEL & DEV Pool Filter Tie Rod Knob Replacement

Keep your Jandy DE filter assembly locked down with the Jandy Tie Rod Knob (R0359400). This hardworking fastener is purpose-built for Jandy DEV and DEL series filters, clamping tie rods securely to maintain proper grid alignment and consistent filtration quality. Its ergonomic grip-and-twist design lets you hand-tighten or release tie rods quickly during cleaning and servicing — no tools required. Manufactured from heavy-duty, corrosion-resistant material,...

R0359900 | Jandy DEV & DEL DE Filter Handle Screws | 4-Pack Hardware Kit

Keep the handle firmly attached to your Jandy D.E. or cartridge filter with the genuine R0359900 Handle Screw Kit. This four-pack contains the exact fasteners needed to lock the top handle onto DEV, DEL, CL, and CV series filter lids, giving you a solid grip every time you need to open the tank for cleaning or cartridge replacement. Each screw is produced from corrosion-resistant material...

R0360900 Jandy Flame Sensor Replacement for Lite2 Low NOx Pool Heaters

Ensure safe and reliable heater ignition with the OEM Jandy Flame Sensor R0360900, a factory-specified replacement for Jandy Lite2 Low NOx pool heaters. This precision sensor continuously monitors the combustion chamber for active flame presence, allowing the heater to operate only when proper ignition is confirmed. By detecting flame conditions in real time, it guards against potential gas accumulation and supports consistent, efficient heating performance....

R0374000 Jandy Energy Filter Top Assembly Replacement

Maintain proper filtration in your pressure-side pool cleaning system with the OEM Jandy Energy Filter Top R0374000. This factory-original replacement component is built for Ray-Vac Pro Series filters and accommodates 1.5-inch plumbing connections. Designed for pressure-side cleaners that function without a booster pump, this filter top helps sustain steady water flow and effective debris capture. Its durable construction withstands prolonged exposure to pool chemicals and...

R0409600 Jandy JVA Gasket and Screw Kit Replacement

Restore a watertight connection on your Jandy valve actuator with the genuine R0409600 Gasket and Screw Kit. Tailored for JVA actuator models 4424 and 2444, this comprehensive package delivers one gasket, two O-rings, and eight screws (four long and four short) needed to re-establish a leak-proof seal. Every component is constructed from materials engineered to resist prolonged exposure to pool treatment chemicals and elevated temperatures,...

R0411600 | Jandy Valve Actuator Gear & Bottom Housing Kit

Bring worn valve actuators back to life with the Jandy Valve Actuator Gear Kit (R0411600). This factory-original replacement set contains every internal gear required to restore fluid, accurate movement in Jandy actuator models 4424 and 2444. Once installed, the new gears deliver reliable valve positioning for precise water flow management across your pool and spa equipment. Each gear is molded from wear-resistant material selected to...

R0456502 | Jandy JxiQ Heater Temperature Sensor Kit Replacement

Keep your JXiQ heater running at peak efficiency with the Jandy Temperature Sensor Kit (R0456502). This factory-original inlet thermistor assembly is built exclusively for JXiQ and JXi heater models 200, 260, and 400, providing pinpoint measurement of incoming water temperature. By delivering real-time thermal data to the heater's onboard control system, this sensor enables precise heating cycle management and consistent output. The kit ships with...

R0458100 Jandy Power Distribution Board for LXi and JXI Pool Heaters

Bring your Jandy pool or spa heater back to full electrical health with the genuine R0458100 Power Distribution Board. Serving as the central hub for internal power routing, this OEM circuit board channels electricity to the ignition module, diagnostic sensors, and control subsystems inside Jandy LXi and JXi heaters. Precision-engineered to deliver the correct voltage to each component, it supports safe startup sequences and stable...

R0462700 | Jandy CS Series Cartridge Filter Tank Top O-Ring Replacement

Seal your Jandy CS Series filter tank with confidence using the genuine R0462700 Tank Top O-Ring. Measuring 10.75 inches in diameter, this OEM replacement O-ring sits in the groove between the tank body and lid on CS100, CS150, CS200, and CS250 cartridge filters, forming a pressure-tight barrier that prevents both water loss and air ingestion. Engineered from a durable elastomer compound, it retains its flexibility...