2" Galvanized Malleable Pipe Union - MN-ZMGUN08

Handle larger pipe runs with ease using this 2-inch Galvanized Malleable Union, built to link and release threaded pipes in plumbing and gas distribution networks. Its galvanized malleable iron composition provides the mechanical toughness and anti-corrosion shielding needed for sustained, dependable service in residential and commercial installations. The three-piece union format enables assembly and disassembly without twisting the connected pipes, a critical feature when performing...

2" Gray Schedule 80 PVC Electrical Conduit Pipe - 10 Ft Length

Handle high-capacity electrical conduit projects with this 2-inch Schedule 80 PVC Electrical Pipe in gray. Crafted in the USA for the most demanding wiring installations, this pipe wraps your conductors in exceptionally thick PVC walls that stand firm against mechanical abuse, corrosive substances, and years of outdoor UV bombardment. The generous 2-inch bore accommodates multiple conductor pulls or larger cable assemblies, while the gray exterior...

2" IPS Poly Fusion Tee Fitting | IPS-ST2

Built for polyethylene gas piping networks, this 2-inch IPS (Iron Pipe Size) Poly Fusion Tee delivers strong, permanent branch connections through heat-fusion welding. The result is a unified, gas-tight joint perfectly suited for both natural gas and propane lines. Premium polyethylene material stands up to corrosion, environmental wear, and physical impact, performing consistently in buried installations and elevated-pressure environments. This lightweight fitting complies with prevailing...

2" IPS Poly Meter Riser - Polyethylene Gas Fitting (IPS-PR2)

Designed to bridge buried polyethylene gas infrastructure with above-ground meters and regulators, this 2-inch IPS (Iron Pipe Size) Poly Meter Riser is fabricated from high-density polyethylene (HDPE). The material provides superior defense against corrosion, environmental stressors, and impact forces, supporting years of uninterrupted service. A precision-engineered profile delivers a secure, leak-resistant transition ideal for natural gas and propane networks. Despite its robust construction, the riser...

2" IPS Poly Socket Fusion Coupling - Polyethylene Pipe Connector (IPS-SCP2)

Purpose-built for joining 2-inch IPS (Iron Pipe Size) polyethylene gas pipes, this Poly Socket Fusion Coupling employs the socket fusion bonding technique to produce a continuous, leak-proof connection. The monolithic joint is optimized for natural gas and propane distribution, delivering the integrity that pressurized and underground gas systems demand. Manufactured from robust materials, the coupling resists corrosion, environmental attack, and impact damage for dependable, long-duration...

2" MIP x 2" Socket High Temperature Pool Union - Swimables SW-30-220

The Swimables SW-30-220 High Temp Union provides a heat-resistant plumbing solution that bridges threaded and slip fittings with ease. Equipped with a 2-inch male iron pipe (MIP) thread on one end and a 2-inch socket connection on the other, this union accommodates multiple pipe joining methods in a single fitting. Robust material selection ensures this union holds up under prolonged exposure to high temperatures and...

2" MIP x 2" Socket Long Neck High Temp Pool Union - Swimables SW-30-320

When your pool or spa plumbing demands a heat-tolerant fitting that won't let you down, the Swimables SW-30-320 High Temp Union rises to the challenge. Featuring a 2-inch male iron pipe (MIP) thread on one side and a 2-inch long neck socket on the other, this union creates a solid, dependable bond between your system's critical components. Its robust construction is purpose-built to endure sustained...

2" MIP x 2.5" Socket High Temperature Pool Union - Swimables SW-30-322

Tackle demanding pool and spa plumbing configurations with confidence using the Swimables SW-30-322 High Temp Union. This fitting pairs a 2-inch male iron pipe (MIP) thread with a 2.5-inch socket connection, bridging two different pipe sizes for a firm, reliable joint. Manufactured from heat-tolerant, heavy-duty materials, the SW-30-322 is ready to perform in environments where standard fittings would struggle. Its user-friendly design makes installation and...

2" Ortega Check Valve Seat Assembly by CMP | Part 25356-502-000

Prevent unwanted backflow and keep water moving in the right direction with the CMP Ortega Check Valve Seat Assembly 25356-502-000. Engineered as a drop-in replacement for 2-inch Pentair Ortega check valves, this assembly restores proper one-way flow control in pool and spa plumbing lines. The valve seat is molded from chemical-resistant PVC that holds up to aggressive sanitizers and balanced water chemistry, while stainless steel...

2" Ortega Valve Complete Insert Replacement | SW-31-060 by Swimables

Restore full flow control to your pool or spa plumbing with the Swimables Ortega Valve Complete Insert SW-31-060. This 2-inch replacement insert is precision-manufactured to integrate seamlessly with Ortega valve bodies, renewing the internal components that regulate water direction and volume. Built from robust, chemically resistant materials, it delivers dependable service season after season. The thoughtful design allows for hassle-free swapping, getting your system back...

2" Poly Socket Fusion 90-Degree Elbow - IPS Polyethylene Fitting (IPS-S92)

This Yellow Poly Socket Fusion 90 Degree Elbow Fitting accommodates 2-inch IPS (Iron Pipe Size) polyethylene gas piping, enabling dependable right-angle routing in distribution systems. The socket fusion technique welds the fitting and pipe into a single, sealed unit, preventing gas leakage in natural gas and propane applications. Durable polyethylene material resists corrosion, stress-induced cracking, and environmental deterioration, delivering consistent results in underground and elevated-pressure...

2" Pool & Spa Pressure Test Kit by Swimables | SW-30-999

Pinpoint hidden plumbing leaks before they become costly problems with the Swimables 2" Pressure Test Kit SW-30-999. This purpose-built diagnostic tool is designed for pressure-testing 2-inch pool plumbing runs, allowing you to verify line integrity with confidence. The kit comes equipped with test plugs and a pressure gauge that together let you seal off a pipe section, pressurize it, and observe whether the reading holds...

2" Pool Pressure Test Kit by CMP | Part 25501-100-000

Pinpoint leaks and verify proper operating pressure in your pool's plumbing with the CMP Pressure Test Kit 25501-100-000. Assembled specifically for 2-inch pool plumbing lines, this all-in-one kit ships with a 2-inch spigot, socket adapter, and a pressure gauge, giving you everything required to perform thorough pressure diagnostics. Setup calls for only standard hand tools and PVC cement, making it equally well-suited for seasoned pool...

2" PVC Connector Union 2-Pack for Raypak Heaters | 006723F

Simplify your plumbing connections with this OEM Raypak 2-inch PVC Connector Union 2-Pack, part number 006723F. Each connector is precision-molded for a watertight seal when joining your Raypak pool heater to the surrounding plumbing, eliminating drips and ensuring smooth water flow. Purpose-designed for direct compatibility with Raypak heating systems, these unions feature tough PVC construction that resists chemical degradation from treated pool water. The straightforward...

2" PVC Connector Union for Raypak Heater by CMP | 2-Pack | 006723F | 21063-801-000

Bridge your Raypak pool heater to your plumbing infrastructure with the CMP PVC Connector Union 21063-801-000, sold as a convenient 2-pack of 2-inch unions. Precision-molded from quality PVC, these connectors deliver airtight, drip-free joints engineered specifically for Raypak heater applications. Their thoughtful design streamlines the installation process while the robust material composition ensures years of dependable service, even under the thermal cycling demands of pool...

2" PVC Slip x Slip Union for Pool Plumbing | Swimables SW-30-020

Tackle larger-diameter plumbing jobs with the Swimables SW-30-020, a 2-inch Schedule 40 PVC slip union fitting engineered for tool-free connection and disconnection of PVC pipe runs in pool, spa, and irrigation setups. Slip sockets on both ends mean no pipe threading is needed -- just glue, assemble, and you are ready to flow. When maintenance time comes, simply loosen the nut to separate the joint...

2" White Schedule 40 PVC Pipe - 10 Ft Pool Plumbing Pipe

Move serious water volume through your plumbing system with this 2-inch Schedule 40 PVC Pipe in white. American-made and built for the long haul, it provides the chemical stability and burst-pressure margin required for pool suction and return lines, commercial water features, and large-scale irrigation networks. The generous bore combined with an ultra-smooth interior surface delivers outstanding flow rates while keeping hydraulic losses low. Easy...

2" x 1" Galvanized Bell Type Reducing Coupling - FG-705NK

Tackle large-to-small pipe transitions with this bell-type Galvanized Reducer Bushing, built to convert a 2-inch threaded connection to a 1-inch line. Its galvanized steel construction provides outstanding resistance to corrosion and mechanical stress, performing capably in water distribution, gas delivery, and various fluid-transfer systems. The bell-shaped housing captures and centers the smaller pipe for a precise, wobble-free fit, while cleanly cut threads form a sealed...

2" x 1-1/4" Galvanized Bell Type Reducing Coupling - GMRC2X11/4

Step down from a 2-inch to a 1-1/4-inch threaded pipe with this bell-type Galvanized Reducer Bushing, a reducing coupling that delivers a clean, secure size transition for water, gas, and fluid piping systems. Fabricated from galvanized steel, the fitting resists corrosion and withstands the physical demands of professional plumbing environments. Its bell-type profile channels the smaller pipe into alignment for a centered, vibration-resistant joint, while...

2" x 2" No Hub Coupling Clamp | Mission C200C by American Granby

Achieve professional-grade pipe connections with the Mission Clamp No Hub Coupling in the 2" x 2" configuration. Engineered with a rugged stainless steel band and a top-quality neoprene gasket, this coupling forms a watertight, corrosion-proof joint between no-hub cast iron pipes used in plumbing and drainage systems. Its built-in flexibility handles minor pipe offsets with ease, producing a secure, drip-free seal without the need for...