Waterway Crystal Water DE Pool Filter | 48 Sq. Ft. | 570-0048-07

Step up your pool's water quality with the Waterway Crystal Water DE Filter, delivering an impressive 48 square feet of filtration capacity for thorough debris and particle removal. This swimming pool filter is built around rugged internal components housed within a fiberglass reinforced polypropylene tank that resists cracking and chemical degradation. The pull-out filter grid pack and industrial-strength tamper-proof clamp make servicing fast and uncomplicated,...

Waterway Crystal Water DE Pool Filter | 60 Sq. Ft. | 570-0060-07

Take pool filtration to the next level with the Waterway Crystal Water DE Filter, providing a substantial 60 square feet of filtration surface area for maximum debris capture and water polishing. Engineered around durable internal elements and encased in a fiberglass reinforced polypropylene tank, this swimming pool filter stands up to years of continuous operation without compromise. The slide-out filter grid pack and robust tamper-proof...

Waterway Crystal Water Filter Air Relief Assembly | 550-4320

The OEM Waterway Air Relief Assembly 550-4320 is an essential service part for Waterway Crystal Water DE Filters, purpose-built to purge trapped air and preserve consistent system operation. When air accumulates inside the filter housing, this assembly releases it to restore proper water circulation and keep filtration running at maximum efficiency. Made from quality materials selected for their resistance to pool chemicals and operating pressures,...

Waterway Crystal Water Filter Bulkhead Fitting - Part 550-4270

The OEM Waterway Bulkhead Fitting 550-4270 delivers a leak-proof junction point for Waterway Crystal Water Cartridge and D.E. filters, maintaining stable water flow and consistent system pressure. Manufactured from high-strength, chemically resistant materials, this fitting stands up to the demanding conditions found in pool equipment environments. By ensuring a secure, watertight connection at critical plumbing points, it plays a central role in preserving filtration performance...

Waterway Crystal Water Filter Clamp Wrench | Part 519-4351

Service your Crystal Water filter clamps with confidence using the genuine Waterway 519-4351 (also referenced as 519-4350) Clamp Wrench. This purpose-built tool is specifically designed to tighten and loosen the clamp bands on Waterway Crystal Water Cartridge and D.E. Filters, ensuring a secure, leak-free closure every time. Its ergonomic handle provides a comfortable, non-slip grip that reduces hand fatigue during extended maintenance work. Made from...

Waterway Crystal Water Filter Handle O-Ring by Aladdin | 805-0233 | O-244

The Aladdin O-244 Filter Handle O-Ring is an important replacement gasket built for WaterWay Crystal Water filtration systems. Seated within the filter handle assembly, it forms a reliable seal that prevents moisture from escaping and keeps internal filter pressure where it needs to be. This o-ring works with multiple WaterWay Crystal Water models spanning both DE and cartridge configurations. Produced from a durable elastomer compound,...

Waterway Crystal Water Filter Metal Clamp New Version | 550-6300B

The OEM Waterway Metal Clamp 550-6300B is a heavy-duty, multi-segment fastening assembly that provides a rock-solid seal for Waterway Crystal Water DE and Cartridge filters. This updated version supersedes the previous part numbers 550-4780 and 550-4260, featuring enhanced durability and improved clamping force for demanding high-pressure filtration applications. Shipped with a locking nut and bolt, this assembly delivers everything needed for a complete, secure installation...

Waterway Crystal Water Filter Pressure Relief Screw With O-Ring - Part 550-4240

The OEM Waterway Pressure Relief Screw with O-Ring 550-4240 is a critical safety component for Waterway Crystal Water Cartridge and DE filters. This two-piece kit allows controlled venting of excess internal pressure, safeguarding your filtration housing and internal parts from potential damage. Supplied with a precision-threaded screw and a matching sealing O-ring, it delivers a snug, drip-free fit on Waterway plastic filter bodies. Keeping this...

Waterway Crystal Water HD Pressure Relief Valve | 550-6730

The OEM Waterway Pressure Relief Valve Assembly with Gauge 550-6730 is built for Crystal Water Cartridge Filters, providing controlled pressure regulation and live system monitoring in a single unit. The integrated pressure gauge gives pool owners instant visibility into filter conditions, making it simple to identify when maintenance is needed or when pressure has climbed to levels that require relief. Constructed from durable, pool-rated materials,...

Waterway Deluxe Poly Jet Internal | Adjustable Flow | 210-6080

Upgrade your spa's water therapy capabilities with the Waterway Adjustable Internal Deluxe Poly Jet 210-6080. This precision-engineered jet insert gives you full command over both the angle and strength of the water stream, letting you tailor each session to your comfort level. Built from resilient poly material and finished in a classic white tone, it blends seamlessly into most spa environments while standing up to...

Waterway Diffuser O-Ring for Mustang and Champion Pumps | 805-0238

The Waterway 805-0238 Diffuser O-Ring is a factory-grade sealing gasket built specifically for Waterway pool pumps, including the SVL56 High-Flow, Champion 56-Frame, and Mustang VS 1.4HP units. With an inside diameter of approximately 3-1/2 inches, this O-ring seats firmly between the diffuser and the pump housing to guard against leaks and sustain reliable pump operation. Manufactured from hardy elastomer formulated to resist pool sanitizers and...

Waterway Diffuser Screw for Pool Pumps | 819-0018

The Waterway 819-0018 Diffuser Screw is a factory-spec stainless steel fastener made for Waterway pool pumps, including the SVL56 High-Flow, SMF, and Champion 56-Frame lines. This screw anchors the diffuser firmly within the pump assembly, preserving correct alignment and preventing any drop in performance. At 1-1/4 inches long with a #4-40 thread size, it provides a dependable hold in the wet, chemically demanding conditions found...

Waterway Econ Return Fitting with Insert Inlet — Black (400-9181)

The Waterway 400-9181 Econ Return Fitting Insider Inlet in black is a 1-inch return component designed for interior mounting within standard 1-inch plumbing found in pool and spa environments. This part enhances water circulation by directing efficient return flow, which helps sustain uniform pressure distribution and thorough filtration across the entire system. Built from hardy, chemically resistant materials, it endures years of service in aquatic...

Waterway Econ Return Fitting with Insert Inlet — White (400-9180)

The Waterway 400-9180 Econ Return Fitting Insider Inlet in white is a sturdy 1-inch return component that mounts inside conventional plumbing lines within pool and spa setups. This fitting promotes steady water return and uniform circulation patterns, helping prolong the service life of connected equipment while supporting superior water quality. Its chemical-tolerant construction guarantees lasting durability, even during periods of heavy operation and exposure to...

Waterway Executive 48-Frame 1.5HP Pool Pump | 3420620-1A

Built for demanding spa and pool applications, the Waterway 3420620-1A Executive 48-Frame Pump pairs a 1.5 HP, 230V, 2-speed motor with a generously sized 6.5" diameter wet end to produce higher head pressure while conserving energy. The Executive wet end is specifically engineered for 48-frame motors and rotates in 90° increments, giving you the freedom to orient plumbing connections for virtually any installation layout. Premium...

Waterway Executive 56-Frame 2-Speed Pool Pump | 4HP 230V 60Hz | 2" Intake | 8' Cord

Get dependable, high-performance water movement with the Waterway 2-Speed Executive 56-Frame Pump. An integrated thermal overload protector shields the motor from heat damage, extending its useful service life considerably. Pure copper windings throughout the motor deliver outstanding conductivity and resilient, long-lasting construction. The generous intake design maximizes water throughput while keeping vibration and sound levels impressively low, making this pump an excellent choice for residential...

Waterway Faceplate Gasket for Mustang Econ Flo and Champion Pumps | 806-1400 / 711-1400

The Waterway 806-1400 Faceplate Gasket is a factory-engineered replacement seal tailored for Champion 56-frame and Econo-Flo variable-speed pool pumps. Built to original equipment tolerances, this gasket forms a leak-proof barrier between the cover plate and motor housing, promoting correct alignment and maximum pump efficiency. Constructed from sturdy, chemical-resistant rubber featuring a rounded cross-section, it stands up to chlorine exposure, ultraviolet radiation, and changing operational conditions....

Waterway Filter Tank O-Ring for Crystal Water Filters | 805-0000

The Waterway 805-0000 Filter Tank O-Ring serves as a vital gasket for Waterway Crystal Water Cartridge and DE filtration units, engineered to deliver a secure, drip-free seal at the tank junction. Constructed from robust, chemically resilient elastomer, this O-ring holds up under the operational demands of pool filtration while preserving peak system performance. With broad compatibility across several Crystal Water filter models, it is indispensable...

Waterway High-Temp PVC Slide Valve Assembly 2.5" | 600-1500

The Waterway 600-1500 OEM Swimming Pool Filter Backwash Valve is constructed from high-temperature CPVC and equipped with 2-1/2 inch ports plus included 2-inch reducer fittings, making it a direct-fit solution for backwashing Crystal Water DE filter systems. Precision-engineered to work with filter models 570-0036-07, 570-0048-07, and 570-0060-07, this slide valve assembly locks in securely and performs reliably through countless backwash cycles in demanding poolside conditions....

Waterway Hose Adapter 1.5" MPT x 1.5" Hose — Part 417-6140

The Waterway Hose Adapter 417-6140 is a rugged plumbing fitting engineered to connect a 1.5-inch male pipe thread (MPT) outlet to a 1.5-inch hose within pool and spa systems. Featuring a smooth male adapter profile, it creates a firm and dependable seal that minimizes drips and maintains even water delivery. Constructed from materials specifically formulated for poolside use, this fitting resists chemical degradation, water pressure,...