018858F Raypak AVIA 404 & 264 Heater Transformer | 120/240/24V

Power your Raypak AVIA 404 and 264 heaters with confidence using the 018858F Transformer, a factory-original unit supporting 120V, 240V, and 24V connections. This multi-voltage design adapts to your specific electrical setup, delivering clean, stable power conversion that the heater control board depends on. Constructed to withstand continuous duty cycles, the 018858F maintains consistent voltage output so your heater fires and modulates without interruption. Its...

018870F Raypak Gas Valve with Gas Line Half | AVIA Pool Heater Part

Maintain smooth, dependable heating for your pool or spa with the Raypak 018870F Gas Valve with Gas Line Half, purpose-engineered for AVIA heater systems. This valve delivers meticulous control over gas delivery, ensuring your burner receives a steady, accurately metered fuel supply for consistent warmth. Constructed from premium materials built to last, the 018870F installs without difficulty and plays a central role in keeping your...

018874F Raypak Direct Spark Ignitor Kit for Avia Pool Heaters

Get your Raypak AVIA pool heater firing up quickly and consistently with the 018874F Ignitor Direct Spark Kit, compatible with both the 264A and 404A models. This comprehensive kit supplies every component required for direct spark ignition, allowing the burner to light swiftly and reliably each time the heater calls for heat. Correct installation of this kit is fundamental to maintaining your AVIA heater's peak...

018875F Raypak Igniter Wire for Avia 264A & 404A Pool Heaters

The 018875F Hi Tension Igniter Wire from Raypak is an authentic factory replacement part purpose-built for Raypak AVIA gas-fired pool and spa heaters, covering both the 264A and 404A models. Serving as the vital link that channels high-voltage current to the burner assembly, this wire is central to achieving fast, reliable heater ignition each time you need heat. Crafted from resilient, weather-resistant materials, it delivers...

018933F Raypak Ignition Board Replacement for 404 Pool Heaters

Restore fast, dependable ignition to your Raypak 404 heater with the OEM 018933F Ignition Board. This factory-engineered control board orchestrates the entire startup sequence for your pool or spa heating system, delivering rapid activation and steady temperature management. Constructed with industrial-quality electronic components, it stands up to years of continuous service and demanding operational conditions. The 018933F drops right into your existing heater housing for...

019043F Raypak Outlet Temperature Sensor Kit | AVIA Gas Heater 264 & 404

Maintain precise outlet temperature readings on your Raypak Avia Gas Heater with the 019043F Temperature Outlet Sensor Kit, purpose-built for the 264 and 404 models. This kit delivers exact thermal data at the water outlet, enabling your heater to modulate output for peak efficiency. Every component required for a complete sensor swap is bundled together, so you can get back to full operation without hunting...

019044F Raypak 125° Auto Reset High Limit Thermostat | AVIA Pool Heaters

Safeguard your Raypak Avia gas-fired pool heater with the 019044F High Limit Auto Reset Thermostat, engineered specifically for the 264A and 404A models. This thermostat continuously tracks internal temperatures and will automatically cut heater operation once conditions surpass the 125-degree safety threshold, then self-resets when temperatures return to a normal range. By acting as a built-in thermal safeguard, it protects your heating equipment from damage...

019045F Raypak 140° Auto Reset High Limit Thermostat | AVIA Pool Heaters

Keep your Raypak Avia gas-fired pool heater operating within safe boundaries using the 019045F High Limit Auto Reset Thermostat, built exclusively for the 264A and 404A heater models. Rated at 140 degrees, this thermostat vigilantly watches internal heat levels and automatically disengages heater operation should temperatures exceed the preset limit. Once conditions normalize, it resets on its own without manual intervention. This genuine Raypak component...

019046F Raypak AVIA Heater Vent Temperature Sensor Kit

Keep your Raypak Avia gas-fired pool and spa heater running safely with the 019046F Vent Temperature Sensor Kit. Purpose-built for Avia models 264 and 404, this sensor continuously tracks exhaust gas temperatures to guard against overheating and maintain peak heating efficiency. Correct installation and periodic inspection of this component are critical to the dependable performance of your Raypak heating system. Consult the Raypak Avia Heater...

019060F Raypak Inlet Header Adapter Kit for Avia 264 & 404 Gas Heaters

The 019060F Inlet Header Adapter Kit from Raypak is a purpose-designed fitting solution for Avia Gas Heater models 264 and 404. By supplying a ready-to-install adapter for the inlet header connection, this kit takes the complexity out of integrating the header into your pool or spa heating system. The result is a secure, properly aligned connection that supports consistent water flow and sustained heater performance...

019061F Raypak Outlet Header Adapter Kit for Avia 264 & 404 Gas Heaters

The 019061F Outlet Header Adapter Kit from Raypak provides a straightforward connection solution for the outlet header on Avia Gas Heater models 264 and 404. This kit eliminates installation guesswork by supplying a precisely fitted adapter that integrates directly into your existing pool or spa heating configuration. The result is a secure, leak-free outlet connection that supports reliable water flow and long-term heater performance. Key...

05501-0005 Pentair Sta-Rite Pool Light Lens Gasket Replacement

Protect your pool light from water intrusion with the genuine Pentair 05501-0005 Lens Gasket, engineered specifically for Sta-Rite pool and spa light fixtures. This precision-molded gasket forms a watertight barrier between the lens and the light housing, keeping moisture out of the electrical compartment where it could cause corrosion, short circuits, or bulb failure. Made from a resilient elastomer compound that resists chlorine, heat, and...

062234B Raypak Heater Unitherm Governor Kit Replacement

Keep your Raypak heater's internal temperature regulation sharp with the 062234B Unitherm Governor Kit, an OEM package that bundles the governor valve, sealing gasket, and return spring into a single, ready-to-install set. This kit governs water flow through the heat exchanger to hold output at the target temperature, preventing thermal runaway that can shorten component life. Crafted from corrosion-resistant materials rated for continuous contact with...

062236B Raypak 1.5" Header Flange Gasket 2-Pack | Pool Heater Seal

Prevent unwanted water loss at your heater's header connections with the Raypak 062236B OEM Header Flange Gasket. Sized at 1.5 inches and supplied in a practical 2-pack, these gaskets form a dependable, leak-resistant seal that protects your heating system from pressure drops and moisture damage. Fabricated from hard-wearing materials that hold up against constant thermal cycling, they deliver sustained sealing integrity across numerous Raypak heater...

070387 Strainer Basket | Pentair WhisperFlo & IntelliFlo Pool Pump Replacement

Protect your pump and keep your pool water free of debris with the genuine Pentair Pump Basket, part number 070387, precision-molded for Whisperflo and Intelliflo pump models. This heavy-duty strainer basket sits inside the pump housing and intercepts leaves, twigs, hair, and other debris before they can reach the impeller. By trapping contaminants at the source, it safeguards internal pump components from damage, promotes unrestricted...

070429 Pentair IntelliFlo WhisperFlo & Sta-Rite SuperMax Seal Plate Short Bolt | 3/8-16 x 1-1/8"

This Pentair Short Bolt for IntellFlo, WhisperFlo, and Sta-Rite SuperMax Seal Plate measures 3/8-16 x 1-1/8" and is purpose-engineered for secure, long-lasting fastening across multiple pump platforms. Crafted from high-grade stainless steel, this bolt delivers superior corrosion resistance and robust holding strength, making it an ideal replacement for maintaining the structural integrity of your pump's seal plate assembly. Key Benefits Premium Stainless Steel Construction: Manufactured...

070430 Pentair WhisperFlo & Intelliflo Seal Plate Long Bolt | 3/8-16" x 1-1/4"

Secure your WhisperFlo or IntelliFlo seal plate with the Pentair 070430 stainless steel hex bolt. This factory-spec fastener anchors the seal plate firmly to the pump wet end, maintaining the compression needed for a drip-free joint and full hydraulic efficiency. Crafted from corrosion-proof stainless steel, the bolt resists rust and pitting even after years of direct contact with chlorinated water and outdoor elements. Precision-cut threads...

070731Z Pentair Compression Ring | V20-322 | SM & SMBW 2000 Series D.E. Valve Replacement

Restore a watertight connection on your filtration valve with the Pentair Compression Ring Replacement For SM and SMBW 2000 Series D.E. Pool and Spa Valves. This factory-authorized Pentair component delivers a professional-grade fit for pool and spa service applications. Key Benefits Engineered for Exact Fit: Purpose-built to match SM and SMBW 2000 Series D.E. Pool and Spa Valves, this compression ring drops right in without...

070927 Pentair WhisperFlo & IntelliFlo Pump Motor Support Foot

Give your pump motor a rock-solid foundation with the Pentair Motor Support Foot, engineered for use with Whisperflo and Intelliflo pump platforms. This support base locks the motor into correct alignment with the wet end, eliminating vibration-induced movement and reducing mechanical stress on shaft seals and bearings. Formed from heavy-duty, corrosion-resistant material, it delivers years of trouble-free support in demanding outdoor installations. Simple bolt-on mounting...

070929 Pentair Almond Foot Insert for WhisperFlo & IntelliFlo Pool Pumps

The Pentair Foot Insert For Whisperflo And Intelliflo Pumps is a factory-specified replacement component built to provide a firm, vibration-dampening base for your pump system. Finished in almond to match the pump housing, this insert anchors the motor assembly securely, reducing operational noise and protecting the equipment pad from unnecessary wear. Key Benefits Firm, Stable Mounting: Locks the pump housing to the base, preventing lateral...