Hayward Multiport Valve Key Cover Replacement by CMP | SP0710X62 | 27514-154-100

Bring your Hayward multiport valve back to full working order with the CMP Replacement Multiport Valve Key Cover 27514-154-100. Manufactured as a compatible substitute for the Hayward SP0710X62, this top-half key assembly restores reliable switching between filter, backwash, rinse, and waste positions, giving you complete control over your pool's filtration routing once again. Key Benefits Hayward SP0710X62 Compatible: Precision-manufactured to align with the original multiport...

Hayward Power-Flo Pump Basket Replacement | Aladdin B-220 | SPX1500LX

The Aladdin B-220 is a reliable replacement strainer basket engineered to take the place of the Hayward SPX1500LX basket in Power-Flo pump systems. It intercepts leaves, twigs, and other debris upstream of the impeller, shielding the pump internals and keeping your filtration path clear. Molded from heavy-duty material for lasting reliability, the B-220 drops in without modifications and is simple to remove for cleaning. A...

Hayward Power-Flo Pump Lid Replacement by CMP | 25306-000-020

Restore your Hayward pump's seal and visibility with the CMP Pump Lid 25306-000-020, a direct-fit replacement for the Hayward Power-Flo II and Power-Flo LX pump series. Its see-through construction lets you quickly inspect pump basket conditions and water flow without disassembly. Each lid ships with a matched O-ring to deliver a watertight seal right out of the box. Built from tough, pool-grade materials, this lid...

Hayward S144T Pro Series Sand Filter Flange Clamp by CMP | GMX600NM | 27515-154-070

Hold your Hayward sand filter together with confidence using the CMP Flange Clamp 27515-154-070. This two-piece clamp, molded from rugged black Noryl plastic, locks the multiport valve securely to the filter tank on Hayward S144T Pro Series Sand Filters. Compatible across several Hayward top-mount sand filter lines including the Pro Series, Sand Master, Swim Pro, and E-Series, it arrives with all necessary bolts and nuts...

Hayward Skimmer Basket Replacement | Aladdin B-152 | SPX1082CA

Swap in the Aladdin B-152 Skimmer Basket as a seamless replacement for the Hayward SPX1082CA and enjoy consistent debris removal that keeps your pool water pristine. Manufactured from tough, chemical-resistant materials, this basket is built to perform reliably over many seasons. It measures 7 inches at the top outside diameter, 6-7/16 inches at the bottom outside diameter, and 5 inches in height, fitting a range...

Hayward Skimmer Basket Replacement | Aladdin B-9 | SP1070E

The Aladdin B-9 offers a premium drop-in replacement for Hayward SP1070E skimmers, delivering reliable debris filtration to keep your pool water sparkling. Built from robust materials that stand up to chemical exposure and seasonal wear, this basket captures leaves, twigs, and other contaminants with ease. With dimensions of approximately 8.125 inches across the top, 5 inches tall, and 5.75 inches at the base, it slides...

Hayward SP-715 Multiport Valve Go-Kit by Aladdin | GO-KIT39

Keep your Hayward SP-715 Multiport Valve performing at its peak with the Aladdin GO-KIT39 rebuild kit. Packed with every critical part needed for a full valve overhaul, this kit ships with a non-metallic bearing, a cover O-ring, a valve seat gasket, a Teflon shaft seal O-ring, and a tube of Aladdin Magic Lube so you have everything on hand from the start. Whether you are...

Hayward SP0410X Push Pull Slide Valve Piston Assembly by CMP | SPX0410BA | 25831-000-100

Get your Hayward slide valve operating like new again with the CMP Piston Assembly 25831-000-100, a premium aftermarket replacement engineered for the Hayward SP0410X push-pull slide valve. Widely used alongside Hayward Micro Clear and Pro Grid D.E. filters, this all-in-one assembly ships with the piston, rod, and handle so you can perform a complete rebuild in a single step. Its robust construction guarantees silky-smooth valve...

Hayward SP0410X Slide Valve Bonnet Nut Replacement | CMP SPX0722D2 | 25831-004-170

Secure the valve assembly on your Hayward SP0410X Series Slide Valve with the CMP Bonnet Nut 25831-004-170. This black plastic nut is a precision-engineered aftermarket substitute for the Hayward SPX0722D2, providing the clamping force needed to keep the slide valve body sealed and functioning properly. It is commonly found on Hayward DE filter systems such as the Micro-Clear and Pro-Grid lines, where maintaining a leak-free...

Hayward Star Clear II Filter Lid O-Ring - Aladdin O-366

Achieve a perfect, drip-free seal on your Hayward Star Clear II filter with the Aladdin O-366 lid O-ring. Constructed from tough, pliable material that stands up to pool chemicals and repeated lid openings, this O-ring seats firmly in the lid groove to block water escape and preserve strong internal filter pressure. Swapping it in takes just minutes and pays off with consistently clean, well-filtered pool...

Hayward Super & MaxFlo Pump Impeller 0.5HP-0.75HP by CMP | SPX2605C | 25305-605-000

Restore peak water circulation to your pool system with the CMP Impeller 25305-605-000, a precision-crafted drop-in replacement for the Hayward SPX2605C. Engineered for 0.5HP full-rated and 0.75HP max-rated pumps, this closed-face impeller works flawlessly in Hayward SP2600X, SP2800X, and SP3000X series units. Its optimized blade geometry promotes powerful water movement while helping to lower energy consumption, making it an economical upgrade that keeps your pump...

Hayward Super II Pump Strainer Basket Replacement | CMP SPX3000M | 27180-207-000

Swap in the CMP Basket 27180-207-000 and keep your Hayward Super II pump trapping debris efficiently. Serving as a direct aftermarket substitute for the Hayward SPX3000M, this strainer basket is precision-molded to sit securely inside the pump housing of SP3000 and SP3000X series units. Its dimensions, approximately 5.625 inches across the top, 4 inches across the bottom, and 8.5 inches tall, mirror the factory basket...

Hayward SwimClear & SuperStar Filter Bottom Manifold Replacement | CMP CX3000C | 25357-750-000

Support consistent, high-performance filtration in your Hayward SwimClear or SuperStar Clear system with the CMP Bottom Manifold 25357-750-000. Positioned at the base of the filter tank, this manifold evenly distributes incoming water across all four cartridge elements, promoting balanced flow and thorough debris capture. Engineered from sturdy, chemical-resistant material, it holds up against the constant water pressure and sanitizer exposure found inside active filter tanks....

Hayward TriStar & EcoStar Pump Diffuser O-Ring by Aladdin | SPX4000Z1 | O-83

The Aladdin O-83 Diffuser O-Ring is a factory-spec replacement gasket built for Hayward TriStar and EcoStar pump families. Seated between the diffuser plate and the pump volute, it forms a secure seal that stops water from bypassing the impeller chamber, preserving full suction strength and hydraulic efficiency. Engineered from a chemical-resistant elastomer, this o-ring stands up to chlorinated water and repeated disassembly, making it a...

Hayward TriStar & EcoStar Pump Housing O-Ring by Aladdin | SPX3200T | O-529

Protect your Hayward TriStar or EcoStar pool pump from costly water loss with the Aladdin O-529 Housing Sealplate O-Ring. Serving as a drop-in substitute for the Hayward SPX3200T, this O-ring forms a reliable barrier between the pump housing and motor assembly to stop leaks before they start. Installing a fresh O-529 safeguards internal components, promotes steady hydraulic performance, and adds years of trouble-free service to...

Heater Igniter With Gasket Kit for Pentair MasterTemp & Max-E-Therm - Swimables 77707-0054 SW-41-054

Get your pool heater firing reliably again with the Swimables Igniter With Gasket Kit SW-41-054, a complete restoration package for Pentair MasterTemp and Max-E-Therm Heaters. This kit pairs a precision-manufactured igniter with a purpose-cut gasket, delivering everything needed for a proper seal and dependable flame ignition in a single purchase. Engineered from materials rated for sustained high-temperature exposure, both components are built to deliver season...

Heavy Duty Large Pool Leaf Canister for Suction Cleaners - Made in USA by Swimables - Part SW-10-530

The Swimables SW-10-530 Leaf Canister is an American-made powerhouse built with a rugged, heavy-duty body for serious debris management. Its tool-free twist-off lid gives you instant access to the oversized collection bag, cutting maintenance time to a minimum. Unlike competitors that use glued-on handles prone to snapping, this canister features a one-piece molded handle that is permanently integrated into the body for unbreakable grip and...

Heavy Duty Metal Replacement Handle for Pool Vacuum 11051H | Pooline 11051H-SH

Upgrade your pool vacuuming setup with the Pooline 11051H-SH, a rugged metal handle purpose-built to pair with the Pooline 11051H vacuum head. Outfitted with a swivel joint and ball-bearing wheels, this handle delivers fluid movement and superior control while you work. It accepts standard 1.5-inch vacuum hoses and attaches to conventional pool poles, integrating seamlessly into your existing equipment lineup. Key Benefits Rugged Metal Build:...

Heavy Duty Pool Leaf Skimmer with Aluminum Handle & Frame by Pooline | #11066

Tackle leaves, bugs, and surface debris quickly with the Pooline Big Heavy Duty Skimmer 11066. Constructed around a robust aluminum handle and frame, this skimmer delivers the rigidity and strength needed for demanding daily use without bending or breaking. The oversized net captures a high volume of debris in each pass, cutting down the time you spend on surface cleaning. Despite its heavy-duty build, the...

Heavy-Duty 18" Blue Nylon Curved Commercial Pool Brush | A&B 3000

Maintain sparkling pool surfaces with the A&B Commercial 18" Blue Nylon Curved Pool Brush 3000, a heavy-duty cleaning tool trusted by pool service professionals and homeowners alike. The durable blue nylon bristles deliver firm yet surface-safe scrubbing action, lifting away dirt, algae, and sediment from plaster, vinyl, and fiberglass without leaving marks. An 18-inch curved brush head hugs pool walls and floor contours for complete...