Jandy 90-Degree Check Valve 2" to 2.5" | Part 7512

The genuine Jandy 90-Degree Check Valve 7512 is a top-tier, corrosion-resistant valve built to regulate water direction and guard against backflow in pool and spa plumbing networks. Formed from heavy-duty CPVC, this valve is made to endure forceful water flow, temperature swings, and the chemical exposure typical of pool settings. A built-in transparent lid and red seal plate facilitate rapid inspection, letting you confirm proper...

Jandy Air Pressure Switch | JXi & LXi Pool Heater Replacement | R0456400

The Jandy Air Pressure Switch R0456400 is an authentic OEM safety device designed for Jandy JXI and LXI pool and spa heaters. This precision switch continuously verifies that adequate airflow exists inside the combustion chamber before allowing the heater to fire. When airflow drops below the minimum safe level, it immediately signals the control board to halt ignition, protecting the unit from unsafe operating conditions....

Jandy AquaLink 4-Function White Spa Side Remote 150 Ft Cable | 7443

The genuine Jandy Spa Side Remote 7443 is a 4-function white controller built to work with AquaLink automation platforms, including both RS and PDA configurations. Equipped with a 150-foot cable, it puts convenient command over spa features like jet activation, lighting adjustments, temperature settings, and water effects right at your fingertips from the spa area. Its weatherproof housing mounts firmly above the waterline on tile...

Jandy AquaLink AquaPalm Wireless Remote R0687300 | Pool & Spa Control

Take command of your AquaLink PDA system from anywhere around the pool with the Jandy AquaPalm Wireless Remote (R0687300). This handheld controller features a water-resistant body that actually floats, along with a textured non-slip grip for confident handling near the water. The bright backlit LCD screen provides clear visibility in any lighting condition, while the straightforward interface makes navigation effortless. With 18-channel RF communication and...

Jandy AquaLink Control System PCB – Pool Automation Circuit Board | PDA-P4

Take command of every aspect of your pool and spa with the OEM Jandy AquaLink PDA-P4, a wireless automation platform that puts pumps, heaters, lighting, and water features under one unified control hub. The included handheld wireless remote lets you adjust settings from anywhere within signal range without walking to the equipment pad. Built-in programmable scheduling automates recurring tasks such as filtration cycles and landscape...

Jandy AquaLink Multiplex Printed Circuit Board | 6584

The genuine Jandy AquaLink Multiplex PCB 6584 is a replacement circuit board engineered for AquaLink RS pool and spa automation systems. It is particularly recommended when more than two wires must be connected into the terminals of a red 4-pin connector, ensuring clean and dependable signal transmission throughout the control network. Built for longevity, this board integrates seamlessly and maintains consistent performance over its service...

Jandy AquaLink PDA-P4 50-Pin CPU Board | R0586100

The genuine Jandy 50-Pin CPU Board R0586100 is a direct-fit replacement for the AquaLink PDA-P4 pool and spa automation system, delivering reliable management of core operational functions. This circuit board governs pumps, heaters, and lighting for single-body configurations utilizing shared equipment. It features a four-circuit CPU architecture designed for streamlined and dependable automation. Installing this board brings improved compatibility with current components, helping sustain top-tier...

Jandy AquaLink PDA-PS8 50-Pin CPU Board | R0586104

The genuine Jandy 50-Pin CPU Board R0586104 is a replacement circuit board for AquaLink PDA-PS8 automation systems, delivering centralized command over pool and spa equipment. It governs pumps, heaters, and lighting while offering seamless integration with Jandy e-Pumps and Pentair IntelliFlo variable speed pumps for superior energy savings. This board additionally provides salt chlorine generator management and intelligent lighting programming capabilities. Swapping in a new...

Jandy AquaLink Pool Automation System – Wireless Control | PDA-PS4

Jandy AquaLink RS OneTouch Indoor Control Panel | White | 7953

Take command of your entire pool and spa system from inside your home with the genuine Jandy AquaLink RS OneTouch Indoor Control Panel. This wall-mounted interface puts up to 32 automated pool and spa functions at your fingertips through an intuitive, menu-driven navigation system. From adjusting water temperature and scheduling filtration cycles to activating lighting and controlling pumps, every aspect of your aquatic setup is...

Jandy AquaLink RS4 Pool & Spa Upgrade Kit R0468503 | RS-PS4 Control Board

The Jandy R0468503 AquaLink RS6 Upgrade Kit delivers a turnkey conversion path for bringing AquaLink RS4 controllers up to Revision QQ standards. This retrofit package unlocks compatibility with contemporary pool equipment such as variable speed pumps, energy-efficient LED lighting, and Jandy OneTouch remote control panels. The updated firmware introduces an enhanced user interface with expanded menu options and refined configuration settings. Tailored exclusively for Jandy...

Jandy AquaLink RS6 Pool & Spa Automation System | RS-PS6

The OEM Jandy SVLV8 Slide Backwash Valve delivers safe, effective backwashing for Jandy DEL48 and DEL60 D.E. filters while eliminating the risk of dead-heading your system. This 2-inch valve is manufactured from robust CPVC thermoplastic, standing up to the rigors of continuous pool operation. Its contoured handle provides effortless, precise sliding action, making it an essential component for maintaining peak filter performance and crystal-clear water...

Jandy AquaLink RS8 Pool & Spa Automation System | RS-PS8

Take command of your entire pool and spa setup with the OEM Jandy AquaLink RS8 Automation System RS-PS8, capable of governing up to eight auxiliary devices from a single unified hub. Whether you need to manage lighting, circulation pumps, heaters, or decorative water features, this system puts every function at your fingertips. Seamless integration with the iAquaLink® app and home automation platforms enables full remote...

Jandy AquaPure & ChlorMatic Transformer T1005 | R0481401 | R0481400

Power your Jandy salt chlorination system reliably with the genuine Jandy Transformer R0481401, the factory-authorized replacement for AquaPure and ChlorMatic control centers. This unit serves as the direct successor to the T1005 and supersedes part number R0481400, delivering rock-solid voltage conversion at 115/230 volts and 50/60 Hz to keep your sanitization electronics running smoothly. Compatible with Jandy models APURE700, APURE1400, CMATIC700, and CMATIC1400, this transformer...

Jandy AquaPure & Fusion Soft 16 Foot DC Power Cord | R0402800

The Jandy R0402800 OEM DC Power Cord is a 16-foot replacement cable that links Jandy AquaPure and Nature2 Fusion Soft salt chlorination cells to their respective control units. This cord delivers steady electrical connectivity so your saltwater generator can produce chlorine at peak efficiency, keeping pool water sanitized and chemically balanced. Engineered with corrosion-proof materials and factory-spec connectors, it stands up to the demanding outdoor...

Jandy AquaPure Ei Chlorinator Plugs 2-Pack R0740500

Protect the internal components of your salt chlorinator during service with this genuine Jandy AquaPure Ei Plug Set (R0740500). This two-pack of OEM plugs is designed to cap open ports on AquaPure Ei systems when performing maintenance or replacing the flow sensor, keeping water out and safeguarding sensitive electronics. Constructed from durable, chemical-resistant material, each plug seats securely for a tight, drip-free seal. Quick and...

Jandy AquaPure Ei Chlorinator Top Clamp R0767900

Keep your chlorinator cell firmly secured with the genuine Jandy Top Clamp (R0767900), an OEM replacement component made for Jandy AquaPure Ei salt chlorine generators. This clamp locks the cell into its correct position, ensuring proper alignment that directly supports consistent chlorine output and dependable system performance. Fabricated from tough, chemical-resistant materials, the R0767900 stands up to prolonged contact with pool chemicals, outdoor weather conditions,...

Jandy AquaPure Flow Port Sensor Replacement | R0452500

The genuine Jandy Flow Port Sensor R0452500 is a sophisticated monitoring module engineered to work with AquaPure 700/1400 and Zodiac FusionSoft 700/1400 salt chlorination platforms. Bundled with a 16-foot cable and a multi-parameter sensor interface, this kit accurately tracks water temperature, salt concentration, and flow rate in real time. Its slotted insert configuration allows for rapid installation and convenient access during servicing, making system diagnostics...

Jandy AquaPure PureLink 3-Port Salt Cell Kit 40K Gallons | PLC1400

The OEM Jandy AquaPure PureLink Cell Kit PLC1400 delivers a turnkey salt chlorination package combining a self-cleaning electrolytic cell with an integrated power center. Purpose-built for seamless integration with AquaPure systems, this kit harnesses advanced electrolysis to convert dissolved pool salt into a steady supply of pure chlorine. The outcome is softer, more inviting water that requires far less manual chemical dosing. Durable, pool-grade materials...

Jandy AquaPure PureLink Salt Cell PLC1400 | Cell Only | R0452400

The genuine Jandy AquaPure PureLink Salt Cell R0452400 is a high-performance chlorine generation unit rated for swimming pools holding up to 40,000 gallons. Equipped with precision-engineered titanium blades coated in ruthenium oxide, this self-cleaning cell delivers strong, steady chlorine production while minimizing scale buildup and hands-on maintenance. With a daily output capacity of up to 1.25 pounds of chlorine, it provides the sanitizing power needed...