Pentair 1.5" Diverter Valve for HiFlow 6-Way Multiport Valves — Part 272512

The genuine Pentair 272512 Diverter with Gasket is a precision-manufactured replacement component for Pentair HiFlow six-way multiport valves fitted with 1.5-inch ports. This diverter serves a critical function in routing water through the valve housing, ensuring steady and well-balanced circulation across your pool or spa system. Shipped with both the diverter and its companion gasket, this kit provides a complete, leak-resistant seal right out of...

Pentair 1.5" MPT x 0.375" Directional Eyeball Inlet Fitting - Part 540008

Fine-tune your pool or spa's water circulation with the genuine Pentair Directional Eyeball Orifice Inlet Fitting 540008. Featuring a 1.5 inch MPT threaded body paired with a 3/8 inch adjustable eyeball opening, this fitting gives you pinpoint control over the direction of return water flow. The compact black design seats into standard wall fittings and is manufactured from resilient materials for dependable, long-lasting performance. Its...

Pentair 1.5HP Dyna Series Pump Impeller C105-236PC | OEM Replacement

The Pentair C105-236PC is a factory-specification impeller replacement for 1.5 horsepower Sta-Rite Dyna-Glas, Dyna-Max, Dyna-Pro, and Dyna-Pro E pump models. Responsible for propelling water through your pool's circulation network, this impeller sustains the consistent flow needed for thorough filtration and balanced water chemistry. It is a smart choice when restoring performance to a compatible pump that has lost output due to impeller wear. As a...

Pentair 10K Temperature Sensor With 20' Cord | Part 520272

Ensure your pool or spa automation system receives accurate temperature data with the genuine Pentair 520272 Temperature Sensor. This factory-original 10k-ohm thermistor connects to IntelliTouch, SunTouch, and Compool control systems, providing reliable readings for water, ambient air, or solar collector temperatures. Its 20-foot cable offers generous reach for flexible sensor placement, whether mounted in the plumbing line, on a solar panel, or at an outdoor...

Pentair 179134 Cartridge 4-Pack 80 sq ft | Clean & Clear Plus 320 Filter Replacement

Restore peak water clarity with this factory-original Pentair four-cartridge set, part number 179134, built exclusively for the Pentair CCP320 Clean and Clear Plus In-Ground Cartridge Pool Filter. Every cartridge in the pack delivers 80 square feet of active filtration surface, capturing fine particles and keeping your water sparkling. Constructed from resilient non-woven polyester fabric engineered to stand up to chlorine and harsh pool chemicals, these...

Pentair 195999 Bottom Tank Assembly | Quad DE Pool Filter Replacement Part

The Pentair Quad DE Bottom Tank Assembly is a crucial component of the Quad DE Filter system, designed to provide exceptional filtration for your pool or spa. This assembly features a durable tank with a precision-engineered design that ensures efficient water flow and thorough filtration. The bottom tank is constructed from high-quality materials to withstand the rigors of regular use and harsh outdoor conditions, providing...

Pentair 1HP Impeller C105-228PF | Fits Dura-Jet JW & JS Pool Pumps

The Pentair C105-228PF is a closed-face impeller designed specifically for Sta-Rite Dura-Jet JW and JS Series spa pumps. With a 1.0 horsepower rating, this component mounts on C-face motors of 1.0 HP or greater equipped with a threaded shaft, providing the water propulsion necessary for effective spa circulation and heating. Its closed-face geometry reduces hydraulic losses and promotes efficient energy transfer. Note that the shaft...

Pentair 1HP Pump Diffuser C1-270PC | Fits DynaGlas, DynaMax & DynaPro

Engineered for 1 HP to 1.5 HP inground pool and spa pumps, the Pentair C1-270PC diffuser is a genuine OEM replacement that fits Dyna-Glas, Dyna-Max, and Dyna-Pro series systems. This vital internal part governs how water travels through the pump housing, directly influencing circulation strength and filtration effectiveness. Measuring 6.5 inches in length and width with a 2.125-inch height, it is fabricated from long-lasting materials...

Pentair 2" Check Valve Rebuild Kit — Part 263042Z

The Pentair 263042Z Check Valve Rebuild Kit is a genuine OEM restoration package tailored for 2-inch Pentair check valves. This all-in-one kit ships with every component required to return your valve to full working order, including the cap, lid, flapper, O-ring, and mounting screws. Engineered for compatibility with Pentair 2-way CPVC check valves, each piece is manufactured to original factory tolerances for a precise fit...

Pentair 2" FPT Half Union Adapter 2-Pack | PKG189

The Pentair FPT Half Union Adapter Kit PKG189 is a factory-spec accessory package engineered to deliver watertight, dependable connections across a broad range of Pentair pool and spa equipment. Each kit contains locking nuts, couplers, and O-rings manufactured to genuine Pentair standards, ensuring every joint remains sealed under continuous operating pressure. Whether you are connecting filter manifolds or pump plumbing, this kit safeguards against leaks...

Pentair 2" HiFlow Valve Clear Sight Glass Nipple — Part 154566

The OEM Pentair Clear Sight Glass Nipple 154566 is a 2-inch visual inspection fitting built for use with select HiFlow pool and spa valves, including models 261049, 261050, 261142, 261047, and 261165. This transparent sight glass lets you observe water clarity in real time during backwashing, helping you pinpoint exactly when to stop the cycle and avoid wasting water. By providing a direct view of...

Pentair 2" Noryl Valve Cover for Ortega Pool Valves - Part 072414Z

Keep your Ortega valve assembly sealed and functioning properly with the Pentair 072414Z Noryl Valve Cover. This gray replacement cover is manufactured for 2-inch Ortega 2-port 90-degree, straight-through, and 3-port CPVC diverter valves. Crafted from robust Noryl plastic, it provides excellent resistance to pool chemicals and outdoor weathering while delivering a secure, drip-free closure. A straightforward swap that supports reliable flow management throughout the life...

Pentair 2" Slide Multiport Valve Plastic Shaft Handle — Part 273089

The genuine Pentair 273089 Plastic Shaft Handle is a factory-specified replacement part designed for Pentair 2-inch PVC slide multiport valves, models 261047 and 261165. This handle provides a firm, comfortable grip for actuating the slide valve, allowing effortless switching between filtration, backwash, and other system modes. Made from premium, long-wearing plastic, it stands up to repetitive handling and the environmental stresses common in poolside settings....

Pentair 2" Slip Half Union for Max-E-Therm Heaters (2-Pack) — Part 42001-0402

The Pentair 2-Inch Slip Half Union 42001-0402 is a factory-spec replacement set built for Sta-Rite Max-E-Therm pool and spa heaters. Packaged with two slip unions, two locking nuts, two couplers, and two O-rings, this kit supplies every component required to establish a firm, drip-proof bond between your heater and the surrounding plumbing. The union design enables quick disconnection and reconnection of the heater during servicing,...

Pentair 2" Slip Half Union PKG 188Z – Durable Pool Plumbing Fitting

The Pentair 2" Slip Half Union PKG 188Z is a genuine Pentair plumbing fitting designed for secure 2" slip connections in pool and spa systems. Built with durable materials and precision tolerances, this half union ensures a tight, leak-resistant seal for long-term performance in residential and commercial pool applications. Key Benefits Secure 2" slip connection for reliable plumbing Genuine Pentair replacement part Leak-resistant design for...

Pentair 2" Top Valve Assembly for HiFlow Multiport Valves — Part 270067

The Pentair 270067 Top Valve Assembly is a factory-authorized OEM replacement built for HiFlow top and side mount multiport valves equipped with 2-inch plumbing connections. Compatible with Pentair multiport valve models such as 261055 and 261152, this assembly restores precise valve control and reliable sealing across every filtration mode. Manufactured to Pentair's exacting quality standards, it promotes consistent water flow regulation and improved system efficiency....

Pentair 2" Triton Filter Bulkhead Fitting — Part 154405

The OEM Pentair 2-inch Bulkhead Fitting 154405 is built to provide a watertight passage point for plumbing through the tank wall of Triton II side mount sand filters. This component is fundamental to sustaining consistent water flow and stable pressure, keeping your pool or spa filtration system running without interruption. Manufactured from robust, pool-grade materials, it holds up against chemical exposure and pressurized service conditions....

Pentair 2" Union Collar Replacement | U11-200PS

The Pentair U11-200PS Union Collar is a factory-spec OEM replacement part built for select Pentair and Sta-Rite pool and spa equipment. At 2 inches, this collar forms a tight, stable junction that upholds the structural integrity of pump and filter assemblies. It is specifically engineered for use with Sta-Rite System:3 Modular Media SM Series D.E. filters, Pentair Clean & Clear RP filters, and Sta-Rite IntelliPro...

Pentair 2" Valve Diffuser for HiFlow Top & Side Mount Multiport Valves — Part 271168

The authentic Pentair 271168 Valve Diffuser is a 2-inch internal component engineered for Pentair HiFlow multiport valves in both top and side mount configurations. This diffuser channels water uniformly throughout the valve body, promoting balanced circulation and enhanced filtration output. Compatible with HiFlow valve models 261185, 261055, and 261152, it is manufactured from materials selected for their resistance to the demanding conditions found in pool...

Pentair 25 Sq Ft Replacement Cartridge for Dynamic Series Filters | R172327

Maintain crystal-clear pool and spa water with the genuine Pentair R172327 filter cartridge, a factory-original replacement built for Dynamic Series filtration systems with 25 square feet of filtering surface area. Measuring 5 inches in diameter by 13-1/4 inches in length, this cartridge is fabricated from reinforced polyester media that delivers dependable particle capture and lasting structural integrity. Designed for extended service intervals, it traps fine...