Pentair FullFloXF Filter Bulkhead Kit — Part 178829

Keep your FullFloXF cartridge filter sealed and performing flawlessly with the Pentair 178829 Bulkhead Kit. This genuine OEM package ships with a precision-molded bulkhead fitting paired with a matching O-ring, delivering everything needed to establish a watertight connection and restore pressure integrity. Engineered from chemically resistant, heavy-duty compounds, both components hold up under sustained exposure to chlorinated water and high operating pressures. Compatible across the...

Pentair FullFloXF Filter Drain Plug With O-Ring — Part 178816

The Pentair 178816 Drain Plug with O-Ring is a factory-original replacement component engineered for Pentair FullFloXF 4000 Series, C Series, and F Series filter systems. This package pairs a sturdy drain plug with a precision-fit O-ring to form a secure, watertight closure at the drain port, which is essential for preserving filtration efficiency and preventing unwanted water loss. The drain plug enables convenient tank draining...

Pentair Gray Lid and Collar for U-3 Pool Skimmers - Part 08650-0169C

Refresh your skimmer's protective cover with the genuine Pentair 08650-0169C Lid and Collar Set, a gray OEM replacement assembly sized for Sta-Rite U-3 inground pool and spa skimmers. At 10.5 inches wide and 2 inches tall, this set delivers a factory-exact fit that seats securely over the skimmer housing. It guards the system against debris intrusion and gives your pool deck a tidy, finished appearance....

Pentair Gray Skimmer Deck Lid for U-3 Pool Skimmers - Part 08650-0058C

Give your pool deck a polished, cohesive look with the genuine Pentair 08650-0058C Skimmer Lid, a gray replacement cover tailored for Pentair Sta-Rite U-3 pool and spa skimmers. Measuring 9-3/4 inches in diameter and 1-1/4 inches tall, it sits flush against the deck surface for a clean, low-profile appearance. Molded from robust plastic that fights off chemical corrosion, ultraviolet degradation, and everyday physical wear, this...

Pentair Gray Weir Gate for U-3 Pool Skimmers - Part 08650-0022C

Replace your worn-out skimmer weir with the genuine Pentair 08650-0022C Weir Gate, purpose-built for Sta-Rite/SwimQuip U-3 pool and spa skimmers. This gray replacement gate measures 8.5 inches long by 5.125 inches wide and features an integrated plastic hinge that ensures smooth, responsive motion during daily operation. By channeling surface water and trapping floating debris inside the skimmer basket, it enhances skimming efficiency, promotes better water...

Pentair Gray Wheel for Legend Platinum Pool Cleaners | LLC6PMG

The OEM Pentair Gray Wheel LLC6PMG is a factory-replacement wheel engineered for Legend Platinum pool cleaners, specifically models LL105PM and LL105PMT. This component is essential for maintaining fluid, uninterrupted cleaner movement across all pool surfaces. Fabricated from rugged materials, it withstands the demands of daily pool cleaning along with constant exposure to water treatment chemicals and abrasive surfaces. Sold without bearings, this wheel installs quickly...

Pentair Great White & Dorado Sectional & Leader Hose — Part 41200-0130

The Pentair 41200-0130 Sectional Hose Kit with Leader is a factory-grade replacement engineered for the Kreepy Krauly Great White suction-side pool cleaner. This 40-foot gray hose assembly features both male and female segments along with a leader section that connects directly to the cleaner head. Manufactured from premium-grade, flexible plastic, it provides smooth, kink-resistant operation and gentle handling across pool surfaces. The ample length accommodates...

Pentair GW9507 Cam Kit | Great White Pool Cleaner Replacement Part

Restore reliable obstacle navigation to your automatic pool cleaner with the genuine Pentair Cam Kit GW9507, engineered for the Kreepy Krauly Great White model GW9500 and Dorado cleaners. This kit ships with both 2-leg and 3-leg cam inserts that partner with the lift brush to redirect the cleaner whenever it encounters drains, steps, corners, or other pool-floor obstructions. By periodically cycling the cleaner's steering direction,...

Pentair HC Series Automatic Feeder Lid Assembly | R172385D

Restore your chemical feeder's seal and performance with the genuine Pentair R172385D Lid Assembly, the factory-specified replacement for HC Series high-capacity automatic chemical feeders including models HC-3315, HC-3330, and HC-3340. Built from a reinforced, chemically resistant polymer, this lid creates a secure, airtight closure that maintains proper internal pressure and ensures steady chemical output during operation. The integrated gasket and convenient twist-lock mechanism make both...

Pentair Heat Exchanger and Chimney Gasket Kit for ETI 400 Heaters - Part 475615

Ensure airtight sealing in your Pentair ETI 400 High-Efficiency Pool Heater with the Pentair 475615 Heat Exchanger and Chimney Gaskets Kit. This factory-original gasket set delivers the tight seals required at both the heat exchanger and chimney interfaces, promoting safe combustion and sustaining top-level heater efficiency. Properly sealed joints prevent unwanted air and gas escape, which in turn supports steady combustion cycles and dependable heating...

Pentair Heater 2" Half Union Adapter Kit - PKG188Z | SW-41-188

Restore watertight heater connections with the Swimables SW-41-188 Half Union Adapter Kit, an exacting substitute for the Pentair PKG188Z. Purpose-built for MasterTemp and Sta-Rite Max-E-Therm heating units, this kit bridges 2_ slip unions to threaded or union-style ports, providing solid, drip-free plumbing joints. Produced to factory-grade tolerances from robust, pool-safe thermoplastics, it re-establishes tight pressure-rated seals and streamlines heater servicing without restricting water throughput. Key...

Pentair Hi-Flo Tubing Kit for In-Line Chemical Feeders R171099

Optimize the chemical delivery performance of your Pentair Rainbow automatic in-line feeder with the genuine R171099 Hi-Flo Tubing Kit, compatible with models 320 and 322. This kit supplies 6 feet of 1/2-inch inner diameter tubing, a 1/2-inch check valve, and all necessary fittings for a complete, trouble-free installation. By maximizing flow capacity, this upgrade promotes steady chlorine or bromine output that helps keep pool or...

Pentair Hi-Flow 2" Multiport Valve 261050 | Side Mount Backwash Valve with Bulkhead Fittings

The Pentair Hi-Flow 2" Multiport Valve 261050 is a high-performance side-mount backwash valve designed for Pentair Quad D.E. and sand filter systems. This durable multiport valve with bulkhead fittings provides efficient control of water flow, allowing you to easily switch between filtration, backwash, rinse, waste, and other essential functions. Engineered for maximum flow rates and working pressure, the Pentair 261050 valve ensures optimal filtration performance...

Pentair HiFlow Multiport Valve Handle — Replacement Part 272520

The Pentair 272520 Valve Handle is a genuine OEM replacement engineered for use with Pentair HiFlow Multiport Valves in professional pool and spa installations. Key Benefits Complete Multiport Control: Purpose-built for HiFlow Multiport Valves, this handle provides accurate selection between filter, rinse, backwash, and waste positions with a smooth, confident motion. Resilient Construction: Manufactured from high-durability materials engineered to resist UV radiation, outdoor weathering, and...

Pentair iChlor & IntelliChlor Acid Wash Stand Kit | 523103

Keep your salt chlorination system performing at its best with the genuine Pentair Acid Wash Stand Kit 523103, purpose-built for IntelliChlor and iChlor salt chlorine generators. This factory-original maintenance kit provides everything needed to safely and effectively dissolve mineral deposits from your salt cell, restoring proper chlorine output and protecting your investment. Supplied with a dedicated cleaning stand and replacement O-rings, the kit streamlines the...

Pentair iChlor Flow Switch with Male Pipe Thread | 523100

Safeguard your iChlor Salt Chlorine Generator against dry-fire damage with the Pentair 523100 Flow Switch. This genuine factory safety device monitors water movement through the plumbing loop and only permits the chlorinator cell to energize when adequate flow is confirmed. If circulation drops below the safe threshold, the switch signals the system to stand down, protecting the cell and associated electronics from heat buildup and...

Pentair Inline Thermometer w/ Nylon Well | SL1DW

The Pentair SL1DW is a factory-original inline thermometer that provides dependable water temperature monitoring for pool and spa plumbing systems. Its large 3-inch dial displays readings on a dual scale covering Fahrenheit (30-130 F) and Celsius (0-55 C), accommodating any measurement preference. The thermometer includes a 3.5-inch stem paired with a 1/2-inch MPT nylon well that threads directly into 1/2-inch tees for straightforward setup. All-stainless...

Pentair IntelliBrite 5G Tempered Lens and Gasket Assembly | 619864Z

The genuine Pentair 619864Z Tempered Lens and Gasket Assembly serves as a factory-spec replacement for IntelliBrite 5g 2nd Generation LED pool and spa lights. Packaged with a tempered glass lens, sealing gasket, mounting screw, and screw o-ring, this kit restores both the watertight integrity and crystal-clear light output of your underwater fixture. The tempered lens is built to handle hydrostatic pressure and thermal fluctuations, while...

Pentair IntelliBrite LED Color Sync Controller for Pool & Spa Lights | 618031

The genuine Pentair LED Color Controller 618031 gives you complete command over Pentair IntelliBrite LED pool and spa lighting, letting you craft the perfect visual atmosphere. Choose from five solid color options—blue, green, red, white, and magenta—or select from seven built-in light shows tailored to different settings and moods. With built-in Wi-Fi connectivity and Pentair Home App support, you can manage your lights remotely, build...

Pentair IntelliChlor & EasyTouch Plumbing Unions | Part 520595

Keep your salt chlorination plumbing secure and watertight with the Pentair 520595 Union Kit. Engineered as a factory-authorized replacement for IntelliChlor systems spanning the IC15, IC20, IC40, and IC60 product line, this two-union set creates strong, serviceable junctions between the chlorinator cell and your pool piping. Every kit arrives with matched couplers, O-rings, and locking nuts, so each connection seats firmly and resists leaks even...