Pentair Predator 100 Replacement Filter Cartridge | 100 Sq Ft | Unicel C-9410 | R173215

Step up your pool or spa maintenance with the Unicel C-9410, a premium replacement filter cartridge tailored for Pentair Clean & Clear 100 and Predator 100 filtration systems. Equipped with 155 precisely formed pleats across 100 square feet of filtration area, this cartridge aggressively captures debris, fine sediment, and waterborne impurities to produce noticeably cleaner water. The open top and bottom end cap configuration with...

Pentair Predator 200 Replacement Filter Cartridge | 200 Sq Ft | Unicel C-9419 | R173217

Elevate your pool's filtration performance with the Unicel C-9419, a robust replacement cartridge purpose-built for Pentair Predator and Pentair Clean & Clear 200 sq ft pool filter systems. Packed with 234 pleats of 4-ounce Reemay 2040 filter media, this cartridge delivers an impressive 200 square feet of filtration coverage for thorough contaminant removal. Its 10-inch diameter and 31 1/8-inch length provide a precise match for...

Pentair Pressure Switch for Pool Heaters and Heat Pumps - Part 473605

Protect your pool heating investment with the Pentair 473605 Pressure Switch, a genuine OEM safety device engineered for Pentair heaters and heat pumps including the MiniMax CH/NT series, UltraTemp models, and ThermalFlo Titanium units. This switch acts as a critical gatekeeper, verifying that adequate water pressure and flow exist before permitting the heating system to ignite. By preventing operation under low-flow or dry conditions, it...

Pentair Pump Drain Plug O-Ring 5/8" x 1/16" - Aladdin O-130 | 192115

Protect your Pentair pump from unwanted drips and moisture loss with the Aladdin O-Ring for drain plugs, model O-130. Measuring 5/8" x 1/16", this gasket is precision-cut to sit snugly in the drain plug seat, forming a dependable barrier against water escape. Engineered from materials that match the ruggedness of Pentair pump hardware, this O-Ring supports both the working life and operational efficiency of your...

Pentair Pump Drain Plug O-Ring Replacement by Aladdin | 51005000 | O-71

The Aladdin O-71 Drain Plug O-Ring is an important sealing gasket that keeps Pentair pump drain plugs watertight and drip-free. Precisely sized for a flush fit against the drain port, this o-ring blocks water loss while your pump operates under full pressure. Its durable elastomer construction resists compression set, chemical attack, and temperature swings, providing season-long reliability. Incorporating this small but critical part into your...

Pentair Pump Impeller C105-138PEB | Max-E-Glas & Dura-Glas 3/4HP - 1HP

Bring your pool pump back to full operating capacity with the Pentair C105-138PEB impeller, a genuine OEM replacement crafted for 3/4HP to 1HP Max-E-Glas and Dura-Glas systems. This precision-machined component generates the water flow your filtration system requires, promoting excellent water clarity while placing less strain on the pump motor. Manufactured from corrosion-resistant materials that handle chlorinated water and particulate exposure, the C105-138PEB drops directly...

Pentair Pump Impeller C105-238PEBA | 2HP Full Rate / 2.5HP Up Rate

Restore factory-level water flow in your pool system with the Pentair C105-238PEBA, a genuine OEM impeller rated for 2HP Full Rate and 2.5HP Up Rate pumps. Purpose-engineered for Sta-Rite Max-E-Glas II, Dura-Glas II, and Max-E-Pro models, this impeller propels water through the pump housing at the precise velocity needed for optimal filtration pressure. Its OEM-grade construction resists the erosive effects of chlorinated water and prolonged...

Pentair Pump Strainer Lid for Max-E-Glas, Dura-Glas & JWP Pumps – C3-139P1

Maintain a secure, airtight seal on your pump's strainer housing with the genuine Pentair Pump Lid C3-139P1. This transparent replacement cover is engineered for Pentair Sta-Rite Max-E-Glas, Dura-Glas, and JWP pool and spa pumps. By capping the suction trap with a tight seal, it stops debris from bypassing the strainer basket and protects your pump's internal workings. Manufactured from impact-resistant, chemical-tolerant plastic that endures outdoor...

Pentair Pump Trap Lid O-Ring - Aladdin O-318 | 805-0436

Restore a proper seal on your pool pump trap lid with the Aladdin O-Ring, model O-318. Purpose-built to swap out worn or cracked gaskets on WhisperFlo and other compatible pump trap lids, this replacement O-Ring locks in an airtight connection that keeps water where it belongs and your pump working at full capacity. Its heavy-duty composition resists degradation from chemicals and constant pressure, making it...

Pentair Purex Filter 8-Hole Manifold - Part 073270Z

The Pentair 073270Z Manifold is a factory-spec bottom manifold replacement for Purex SM and SMBW 2000 and 4000 Series D.E. filters. Its eight precision-spaced openings distribute filtered water uniformly across every grid, eliminating uneven flow and potential bypass paths. Manufactured to exact OEM dimensions, it seats perfectly within the original filter housing to maintain structural alignment and dependable particulate capture. The chemically resistant construction handles...

Pentair Purex SM & SMBW 4000 Filter Clamp Ring — Part 197020

The OEM Pentair 197020 Clamp Ring is a factory-specified replacement component for Pentair Purex SM 4000 and SMBW 4000 filter systems. This clamp ring secures the upper and lower tank halves together, creating the pressure-tight seal that is critical for proper D.E. filtration performance. Built from durable, corrosion-resistant materials, it is designed to hold up under constant exposure to pool chemicals and outdoor conditions. When...

Pentair Push Pull Slide Valve Handle — Part 270134

The genuine Pentair 270134 Handle is a factory-spec replacement for Pentair push-pull slide valve models 263064, 263052, 263053, 263078, and 263079. This handle delivers confident control over filter and backwash operations, enabling seamless switching within your pool or spa plumbing configuration. Built to meet Pentair's rigorous quality benchmarks, it withstands the wear of everyday use and exposure to challenging poolside environments. Swapping in this component...

Pentair Push Pull Slide Valve Piston Assembly by CMP | 273241Z | 25831-120-100

Bring your Pentair push-pull slide valve back to peak condition with the CMP Piston Assembly 25831-120-100. Custom Molded Products (CMP) designed this assembly as a direct-fit replacement for Pentair slide valve model 261165, packaging the piston, shaft, and handle into a single, ready-to-install kit. Whether the original components are worn, cracked, or sticking, this assembly restores fluid valve travel so you can switch confidently between...

Pentair Push Pull Slide Valve Piston Assembly by CMP | 51013811 | 25831-130-100

Return your Pentair slide valve to factory-fresh performance with the CMP Piston Assembly 25831-130-100. Manufactured by Custom Molded Products (CMP) specifically for the Pentair push-pull slide valve model 263034, this kit delivers the piston, shaft, and handle as a complete, ready-to-install package. Worn seals, a sticky handle, or sluggish valve response are all signs it is time for a rebuild, and this assembly makes the...

Pentair Push Pull Valve for American Products Sand & DE Filters — Part 263052

The Pentair 263052 Push-Pull Valve is a genuine OEM replacement manufactured specifically for American Products sand and D.E. filter systems. Featuring an 8-inch centerline and direct 2-inch PVC union side port connections, this valve offers adaptable plumbing integration and can also accommodate 1-1/2-inch lines when paired with reducer fittings. Its streamlined two-position design minimizes internal flow restriction, delivering superior performance during both standard filtration and...

Pentair Push Pull Valve for System 2 & System 3 Filters — Part 263053

The Pentair 263053 Push-Pull Valve is a genuine OEM component purpose-built for Pentair System 2 and System 3 filter platforms, providing precise management of backwash and filtration cycles. This rugged valve is equipped with 2-inch PVC union ports and a 7.81-inch centerline for direct, gap-free integration with your existing filter plumbing. The heavy-duty PVC body is formulated to endure the chemical exposure and mechanical demands...

Pentair PVC Push Pull Slide Valve for FNS Plus & Quad DE Filters — 263064 / 261165

Engineered as a direct-fit solution for Pentair FNS Plus and Quad DE filter systems, the Pentair 263064 PVC Push-Pull Slide Valve (supersedes 261165) delivers reliable toggling between filtration and backwash operations. Its heavy-duty PVC construction and 7.5" centerline provide a tight seal and precise water management. Whether you are upgrading an aging valve or completing a fresh installation, this component streamlines routine pool care with...

Pentair Quad DE 100 Replacement Filter Cartridge 4-Pack | 178656

Pentair Quad DE 100 Pool Filter Cartridge Replacement (4 Pack) 178656. Restore peak water clarity and sanitation to your pool with these Pentair Quad DE 100 Series replacement cartridges. Precision-engineered for the Quad DE 100 filter system, these cartridges unite the fine-particle accuracy of diatomaceous earth filtration with the straightforward convenience of a drop-in cartridge format. Each cartridge delivers 25 square feet of active filtration...

Pentair Quad DE 60 Replacement Filter Cartridge 4-Pack | 178654

The Pentair replacement cartridge 178654 (4 Cartridges) is built to sharpen the clarity of your pool and spa water by effectively capturing accumulated particles and contaminants. Fashioned from resilient polyurethane material, this cartridge delivers consistent, dependable performance over an extended lifespan. Its synthetic filtration media provides complete water treatment, fostering a spotless and healthy aquatic environment. Key Benefits Direct-Fit for Pentair Quad DE 60: Functions...

Pentair Quad DE 80 Replacement Filter Cartridge (1 Pack) | Unicel C-6980 | 178655

Deliver top-tier filtration to your pool with the Unicel C-6980, a precision replacement cartridge crafted exclusively for the Pentair Quad DE 80 filter system. Each individual cartridge provides 20 square feet of filtration coverage through 42 expertly formed pleats of 8-ounce DE filter media, ensuring effective dirt capture and prolonged intervals between maintenance sessions. Sturdy polyurethane end caps create a robust, leak-proof seal inside the...