Jandy AquaLink Control System PCB – Pool Automation Circuit Board | PDA-P4

Take command of every aspect of your pool and spa with the OEM Jandy AquaLink PDA-P4, a wireless automation platform that puts pumps, heaters, lighting, and water features under one unified control hub. The included handheld wireless remote lets you adjust settings from anywhere within signal range without walking to the equipment pad. Built-in programmable scheduling automates recurring tasks such as filtration cycles and landscape...

Jandy AquaLink Multiplex Printed Circuit Board | 6584

The genuine Jandy AquaLink Multiplex PCB 6584 is a replacement circuit board engineered for AquaLink RS pool and spa automation systems. It is particularly recommended when more than two wires must be connected into the terminals of a red 4-pin connector, ensuring clean and dependable signal transmission throughout the control network. Built for longevity, this board integrates seamlessly and maintains consistent performance over its service...

Jandy AquaLink PDA-P4 50-Pin CPU Board | R0586100

The genuine Jandy 50-Pin CPU Board R0586100 is a direct-fit replacement for the AquaLink PDA-P4 pool and spa automation system, delivering reliable management of core operational functions. This circuit board governs pumps, heaters, and lighting for single-body configurations utilizing shared equipment. It features a four-circuit CPU architecture designed for streamlined and dependable automation. Installing this board brings improved compatibility with current components, helping sustain top-tier...

Jandy AquaLink PDA-PS8 50-Pin CPU Board | R0586104

The genuine Jandy 50-Pin CPU Board R0586104 is a replacement circuit board for AquaLink PDA-PS8 automation systems, delivering centralized command over pool and spa equipment. It governs pumps, heaters, and lighting while offering seamless integration with Jandy e-Pumps and Pentair IntelliFlo variable speed pumps for superior energy savings. This board additionally provides salt chlorine generator management and intelligent lighting programming capabilities. Swapping in a new...

Jandy AquaLink Pool Automation System – Wireless Control | PDA-PS4

Jandy AquaLink RS OneTouch Indoor Control Panel | White | 7953

Take command of your entire pool and spa system from inside your home with the genuine Jandy AquaLink RS OneTouch Indoor Control Panel. This wall-mounted interface puts up to 32 automated pool and spa functions at your fingertips through an intuitive, menu-driven navigation system. From adjusting water temperature and scheduling filtration cycles to activating lighting and controlling pumps, every aspect of your aquatic setup is...

Jandy AquaLink RS4 Pool & Spa Upgrade Kit R0468503 | RS-PS4 Control Board

The Jandy R0468503 AquaLink RS6 Upgrade Kit delivers a turnkey conversion path for bringing AquaLink RS4 controllers up to Revision QQ standards. This retrofit package unlocks compatibility with contemporary pool equipment such as variable speed pumps, energy-efficient LED lighting, and Jandy OneTouch remote control panels. The updated firmware introduces an enhanced user interface with expanded menu options and refined configuration settings. Tailored exclusively for Jandy...

Jandy AquaLink RS6 Pool & Spa Automation System | RS-PS6

The OEM Jandy SVLV8 Slide Backwash Valve delivers safe, effective backwashing for Jandy DEL48 and DEL60 D.E. filters while eliminating the risk of dead-heading your system. This 2-inch valve is manufactured from robust CPVC thermoplastic, standing up to the rigors of continuous pool operation. Its contoured handle provides effortless, precise sliding action, making it an essential component for maintaining peak filter performance and crystal-clear water...

Jandy AquaLink RS8 Pool & Spa Automation System | RS-PS8

Take command of your entire pool and spa setup with the OEM Jandy AquaLink RS8 Automation System RS-PS8, capable of governing up to eight auxiliary devices from a single unified hub. Whether you need to manage lighting, circulation pumps, heaters, or decorative water features, this system puts every function at your fingertips. Seamless integration with the iAquaLink® app and home automation platforms enables full remote...

Jandy AquaPure & ChlorMatic Transformer T1005 | R0481401 | R0481400

Power your Jandy salt chlorination system reliably with the genuine Jandy Transformer R0481401, the factory-authorized replacement for AquaPure and ChlorMatic control centers. This unit serves as the direct successor to the T1005 and supersedes part number R0481400, delivering rock-solid voltage conversion at 115/230 volts and 50/60 Hz to keep your sanitization electronics running smoothly. Compatible with Jandy models APURE700, APURE1400, CMATIC700, and CMATIC1400, this transformer...

Jandy AquaPure & Fusion Soft 16 Foot DC Power Cord | R0402800

The Jandy R0402800 OEM DC Power Cord is a 16-foot replacement cable that links Jandy AquaPure and Nature2 Fusion Soft salt chlorination cells to their respective control units. This cord delivers steady electrical connectivity so your saltwater generator can produce chlorine at peak efficiency, keeping pool water sanitized and chemically balanced. Engineered with corrosion-proof materials and factory-spec connectors, it stands up to the demanding outdoor...

Jandy AquaPure Ei Chlorinator Plugs 2-Pack R0740500

Protect the internal components of your salt chlorinator during service with this genuine Jandy AquaPure Ei Plug Set (R0740500). This two-pack of OEM plugs is designed to cap open ports on AquaPure Ei systems when performing maintenance or replacing the flow sensor, keeping water out and safeguarding sensitive electronics. Constructed from durable, chemical-resistant material, each plug seats securely for a tight, drip-free seal. Quick and...

Jandy AquaPure Ei Chlorinator Top Clamp R0767900

Keep your chlorinator cell firmly secured with the genuine Jandy Top Clamp (R0767900), an OEM replacement component made for Jandy AquaPure Ei salt chlorine generators. This clamp locks the cell into its correct position, ensuring proper alignment that directly supports consistent chlorine output and dependable system performance. Fabricated from tough, chemical-resistant materials, the R0767900 stands up to prolonged contact with pool chemicals, outdoor weather conditions,...

Jandy AquaPure Flow Port Sensor Replacement | R0452500

The genuine Jandy Flow Port Sensor R0452500 is a sophisticated monitoring module engineered to work with AquaPure 700/1400 and Zodiac FusionSoft 700/1400 salt chlorination platforms. Bundled with a 16-foot cable and a multi-parameter sensor interface, this kit accurately tracks water temperature, salt concentration, and flow rate in real time. Its slotted insert configuration allows for rapid installation and convenient access during servicing, making system diagnostics...

Jandy AquaPure PureLink 3-Port Salt Cell Kit 40K Gallons | PLC1400

The OEM Jandy AquaPure PureLink Cell Kit PLC1400 delivers a turnkey salt chlorination package combining a self-cleaning electrolytic cell with an integrated power center. Purpose-built for seamless integration with AquaPure systems, this kit harnesses advanced electrolysis to convert dissolved pool salt into a steady supply of pure chlorine. The outcome is softer, more inviting water that requires far less manual chemical dosing. Durable, pool-grade materials...

Jandy AquaPure PureLink Salt Cell PLC1400 | Cell Only | R0452400

The genuine Jandy AquaPure PureLink Salt Cell R0452400 is a high-performance chlorine generation unit rated for swimming pools holding up to 40,000 gallons. Equipped with precision-engineered titanium blades coated in ruthenium oxide, this self-cleaning cell delivers strong, steady chlorine production while minimizing scale buildup and hands-on maintenance. With a daily output capacity of up to 1.25 pounds of chlorine, it provides the sanitizing power needed...

Jandy AquaPure PureLink Terminal Adapter Kit with O-Rings | 3 Port Cells | R0452200

The genuine Jandy Terminal Adapter Kit and O-Rings R0452200 delivers a full replacement package for AquaPure and PureLink 3-Port Cells. This kit contains the terminal adapter, sealing O-rings, and mounting screws required to re-establish a solid, moisture-proof junction between the salt cell and its power center. Maintaining a strong electrical bond at this connection point is critical for consistent chlorine production and overall system safety....

Jandy AquaPure PVC Cell Plug for PLC1400 & PLC700 | Part A0120200

Keep your Jandy AquaPure salt chlorination system sealed and leak-free with the A0120200 PVC Cell Plug. This factory-original component is specifically crafted for the PLC1400 and PLC700 chlorinator models and serves as a key element of the R0452100 union kit. Made from chemical-resistant PVC, it creates a watertight closure at your cell connections, safeguarding against drips that can compromise system efficiency. Its rugged composition stands...

Jandy AquaPure Salt System Power Center | APUREM

Jandy AquaPure Sensor Adapter Cable for PureLink Systems | R0538600

The genuine Jandy R0538600 AquaPure Sensor Adapter Cable solves the compatibility gap between updated AquaPure flow sensors and legacy PureLink circuit boards. Because the redesigned sensor boards are physically longer than their predecessors, they can interfere with the power center door closure. This specialized extension cable reroutes the sensor connection away from the door, giving you the extra length needed to position components safely inside...