Pentair System 3 Filter Clamp Assembly | Part 24850-0200

The Pentair 24850-0200 Clamp Assembly is a factory-original component engineered to hold together the tank halves on Sta-Rite System 3 filter models, including S7M120, S7M400, S8M150, S8M500, S7D75, S8D110, S7S50, and S8S70. This robust assembly creates a pressure-tight bond between the upper and lower sections of the filter housing, delivering leak-free operation and safe pressure containment. Constructed from high-strength thermoplastic paired with corrosion-resistant stainless steel...

Pentair Purex SM & SMBW 4000 Filter Clamp Ring — Part 197020

The OEM Pentair 197020 Clamp Ring is a factory-specified replacement component for Pentair Purex SM 4000 and SMBW 4000 filter systems. This clamp ring secures the upper and lower tank halves together, creating the pressure-tight seal that is critical for proper D.E. filtration performance. Built from durable, corrosion-resistant materials, it is designed to hold up under constant exposure to pool chemicals and outdoor conditions. When...

Pentair DEP & System 3 SD Filter Tie Rod | Part 23900-0039

Keep your D.E. filter grid assembly firmly secured with the genuine OEM Pentair 23900-0039 Tie Rod. This 20.5-inch brass rod is engineered to hold the filter grids in proper vertical alignment within Pentair Sta-Rite DEP and System 3 SD series filtration systems. Brass construction provides exceptional resistance to corrosion in chlorinated and chemically balanced pool water, ensuring that this component maintains its strength and integrity...

Pentair Triton II & Tagelus Filter Closure Wrench — Part 154512

The OEM Pentair Closure Wrench 154512 is a 6-inch plastic tool specifically built for opening and securing closures on Pentair Triton II and Tagelus pool filters. It works with models including TA30D, TA40D, TA50D, TA60D, TR40, TR50, and TR100, and is shaped to deliver a snug, reliable grip on both top and side-mount valve closures. Constructed from sturdy plastic, this wrench is designed for repeated...

Pentair Clamp Knob for Purex & WhisperFlo Pumps - Part 071136Z

The Pentair 071136Z clamp knob is a genuine factory replacement designed to fasten filter and pump lids on Pentair Purex SM/SMBW 2000 and 4000 series filters as well as WhisperFlo pumps manufactured before 1998. This knob applies even compression to the lid, holding the gasket firmly in place to create a pressure-tight seal that guards against air leaks and water loss. Crafted from tough, pool-rated...

Pentair Air Release Valve for Posi-Flo II & System 2 Pool Filters | Part 25010-0200

The Pentair 25010-0200 Air Release Valve is an OEM replacement engineered for Posi-Flo II Cartridge Filters and Sta-Rite System 2 PLM Modular D.E. Filters. This valve purges entrapped air from within the filter housing, restoring balanced pressure and boosting overall system throughput. Packaged with an O-ring for a secure, drip-free seal, it ensures continuous filtration reliability. As a fundamental service component, this air release valve...

Pentair 3/4" NPT Sand Drain Spigot for Triton II & Tagelus Filters — Part 154698

The Pentair 154698 Sand Drain Spigot is a factory-original drain fitting built for Pentair Triton II and Tagelus sand filter systems. Equipped with a 3/4-inch NPT threaded connection, this spigot is compatible with filter models TR50, TR60, TR100, TR140, TA40D, TA50D, TA60D, and TA100D. It streamlines the draining process during scheduled maintenance, providing controlled release of water and sand from the filter tank. With compact...

Pentair Tagelus & Triton Sand Filter Lateral — Part 152202

The Pentair 152202 Filter Lateral is an expertly crafted replacement part designed for dependable, high-efficiency performance inside sand filter systems. This lateral measures 9-1/8 inches in length with a 1-15/16-inch diameter and features a 1-1/4 MPT threaded fitting, enabling thorough water distribution across the entire sand bed. It pairs seamlessly with a broad selection of Pentair filters—including Tagelus (TA100, TA100D) and Triton models (TR100, TR100C,...

Pentair Posi-Lok Ring for Sta-Rite System 2 & PLM Filters — Part 27001-0054S

The genuine Pentair 27001-0054S Posi-Lok Ring serves as the factory-authorized replacement component for Pentair Sta-Rite System 2 and PLM series modular media and D.E. filters. This ring creates a firm, watertight closure that keeps your filter running at full capacity during every pool or spa maintenance cycle. With dimensions of 23-3/4 inches in length, 5-1/2 inches in height, and 21-1/4 inches in width, it accommodates...

Pentair 25 Sq Ft Replacement Cartridge for Dynamic Series Filters | R172327

Maintain crystal-clear pool and spa water with the genuine Pentair R172327 filter cartridge, a factory-original replacement built for Dynamic Series filtration systems with 25 square feet of filtering surface area. Measuring 5 inches in diameter by 13-1/4 inches in length, this cartridge is fabricated from reinforced polyester media that delivers dependable particle capture and lasting structural integrity. Designed for extended service intervals, it traps fine...

WC8-126 Pentair Posi-Flo Air Bleed Replacement Filter Screen

The Pentair WC8-126 Air Bleed Filter is an OEM replacement component engineered for Pentair Sta-Rite Posi-Flo II PTM series cartridge filters, covering models PTM50, PTM70, and PTM100. This air bleed tube vents entrapped air from the filter housing to sustain steady operation and uninterrupted water flow. Built to endure the rigors of pool filtration environments, it plays a key role in your regular filter upkeep...

Pentair Air Bleed Assembly for PLD & SMD Pool Filters | Part 24800-0120

The Pentair 24800-0120 Air Bleed Assembly is a genuine OEM replacement built for Sta-Rite System 3 SMD Series D.E. filters and System 2 PLD filter units. This assembly vents excess air from within the filter tank, which promotes balanced water circulation and preserves filtration effectiveness over time. Manufactured to endure the demands of regular pool operation, it plays an essential role in preventive maintenance and...

Pentair Air Release Valve for PXC & PLDE Series Pool Filters | Part 24206-0103S

The Pentair 24206-0103S Air Release Valve Vent Stem serves as a factory-authorized replacement for Pentair Sta-Rite PXC and Posi-Clear cartridge filters, along with System 2 Modular Media PLM and D.E. PLDE filter units. Its primary function is to vent accumulated air from the filtration housing, which preserves stable water pressure and supports uninterrupted flow through the system. A bundled O-ring delivers a dependable, leak-resistant connection...

Pentair Sta-Rite System 3 Pool Filter Clamp Bolt | Part 24850-0010

The Pentair 24850-0010 Clamp Bolt is a genuine OEM replacement designed for Sta-Rite System:3 modular media and D.E. filter lines, covering SM, SMD, SD, and SS series units. This bolt is critical for securing the filter tank halves together, ensuring safe pressurization and dependable filtration. Manufactured to withstand the corrosive conditions found in pool equipment environments, it provides consistent holding strength throughout its service life....

Pentair Sta-Rite PLM100 Filter Module Cartridge — Part 27002-0100S

The Pentair 27002-0100S Filter Module is the factory-authorized OEM cartridge replacement for the Sta-Rite System 2 Modular Media Filter, Model PLM100. With 100 square feet of high-grade pleated filtration media, a height of 18-1/4" and a diameter of 13", this cartridge provides outstanding particle capture and debris-loading capacity — holding up to 15 times more contaminants than a comparably sized sand filter. Its shallow-pleat construction...

Pentair Extra-Long Sand Filter Lateral — Part 150085

The Pentair 150085 Extra Long Sand Filter Lateral is a premium, OEM-spec replacement lateral engineered to bring your residential pool sand filter back to peak filtration and flow performance. With its 1/4-turn locking mechanism and extended reach, this lateral facilitates smooth water circulation and promotes uniform sand distribution within the filter tank. It works with an extensive lineup of Pentair sand filter models—including Sand Dollar...