Pentair Switch Membrane for Max-E-Therm & MasterTemp Heaters — Part 42002-0029Z

The Pentair Switch Membrane 42002-0029Z is a genuine replacement component engineered for Sta-Rite Max-E-Therm and Pentair MasterTemp pool and spa heaters. Functioning as the main user-facing interface on the heater control panel, this membrane delivers precise input recognition and seamless navigation through all heater settings. Each button is distinctly labeled and tactile, providing dependable control even after years of regular use. Built to genuine Pentair...

Pentair System 3 Filter Clamp Assembly | Part 24850-0200

The Pentair 24850-0200 Clamp Assembly is a factory-original component engineered to hold together the tank halves on Sta-Rite System 3 filter models, including S7M120, S7M400, S8M150, S8M500, S7D75, S8D110, S7S50, and S8S70. This robust assembly creates a pressure-tight bond between the upper and lower sections of the filter housing, delivering leak-free operation and safe pressure containment. Constructed from high-strength thermoplastic paired with corrosion-resistant stainless steel...

Pentair System 3 Pool Filter Drain Plug | Part 24900-0503

The Pentair 24900-0503 Drain Plug is a genuine OEM part engineered for Sta-Rite System 3 filters, providing a reliable drainage point for removing sand, water, and accumulated debris from the filter tank. Built to facilitate both routine servicing and seasonal winterization tasks, this plug seats securely in compatible models such as S7M120, S8M500, and S7S50. Its heavy-duty construction delivers outstanding resistance to pool treatment chemicals,...

Pentair Tagelus & Sand Dollar Filter Lateral — Part 155007

The Pentair 155007 Lateral is a factory-original replacement component that plays a central role in maintaining effective water filtration within Pentair Sand Dollar and Tagelus sand filter systems. Precision-engineered for reliable performance, this lateral channels water uniformly across the sand bed, capturing particulate matter while allowing filtered water to return to your pool. It is designed for use with the Sand Dollar SD35 and Tagelus...

Pentair Tagelus & Triton Sand Filter Lateral — Part 152202

The Pentair 152202 Filter Lateral is an expertly crafted replacement part designed for dependable, high-efficiency performance inside sand filter systems. This lateral measures 9-1/8 inches in length with a 1-15/16-inch diameter and features a 1-1/4 MPT threaded fitting, enabling thorough water distribution across the entire sand bed. It pairs seamlessly with a broad selection of Pentair filters—including Tagelus (TA100, TA100D) and Triton models (TR100, TR100C,...

Pentair Tagelus Sand Filter Valve Band Clamp — Part 152130

The OEM Pentair Valve Band Clamp 152130 is an essential replacement part that anchors the valve firmly to the filter tank on Pentair Tagelus sand filters. Built to serve models such as TA100 and TA100D, this clamp features an 8.35-inch diameter sized for 2-inch multiport top and side mount valves. Its firm grip on the valve-to-filter connection preserves a watertight bond, which is crucial for...

Pentair Thermistor Defrost Sensor Probe for UltraTemp Heat Pumps - Part 473665

Keep your heat pump running efficiently in cooler weather with the Pentair 473665 Thermistor Defrost Sensor Probe, a genuine OEM replacement component designed for ThermalFlo Titanium and UltraTemp heat pumps. At 53.5 inches in length, this probe reaches the optimal sensing position within the unit to deliver accurate, real-time temperature data that drives the automatic defrost cycle. When outdoor temperatures drop, frost can accumulate on...

Pentair Thermostat Circuit Board | MiniMax & PowerMax Heater Replacement | 470179

Keep your pool or spa heater running at peak efficiency with the Pentair 470179 Thermostat Circuit Board, a genuine OEM electronic component engineered for the MiniMax, MiniMax Plus, and PowerMax series of heaters. This board serves as the central temperature management hub, continuously monitoring and adjusting water heat levels to deliver the comfort you expect from your heating system. It supports an extensive lineup of...

Pentair Trap Cover Lid for Sta-Rite Pool Pumps – C3-185

Shield your pump's strainer basket with the genuine Pentair Trap Cover Lid C3-185P, a rugged replacement cap built for Sta-Rite pool and spa pump models. This lid secures the suction trap opening, blocking leaves and debris from entering the basket housing so your pump can circulate water freely and efficiently. Sized at approximately 7.125 inches in both length and width with a 3.5-inch height, it...

Pentair Triton & Tagelus Sand Filter Drain Assembly — Part 152220Z

The OEM Pentair Sand Drain Kit 152220Z is a purpose-built component that makes draining water and sand from Triton and Tagelus filter models quick and efficient during scheduled service intervals. Designed for an exact fit, this kit enables thorough filter emptying to support hassle-free maintenance, deeper cleaning, and lasting filter performance. Made from tough, corrosion-resistant materials, it provides exceptional durability even under the most challenging...

Pentair Triton Filter 6" Black Buttress Threaded Closure Kit — Part 154641

The OEM Pentair Black Buttress Threaded Closure Kit 154641 is a 6-inch replacement assembly designed for Triton II pool and spa sand filters. This complete kit delivers a secure, leak-proof seal on the filter lid—an essential requirement for maintaining proper pressure and safe operation. The package contains a closure lid, air bleed valve, pressure gauge, lid O-ring, and all required hardware for a full installation....

Pentair Triton Filter 8.5" Closure Lid — Part 154575

The OEM Pentair Closure 154575 is an 8.5-inch replacement lid built for select Triton sand filter models, delivering a snug, reliable seal that stops leaks and sustains proper system pressure. This component is key to preserving your filtration system’s structural soundness, ensuring steady and efficient filter performance day after day. Made from durable materials, this closure is designed to handle the rigors of continuous pool...

Pentair Triton Filter Black Buttress Threaded Closure Kit — Part 154856Z

The Pentair 154856 Black Buttress Threaded Closure Kit is a factory-original replacement package engineered for Triton II sand filters. This comprehensive assembly restores a secure, watertight seal at the filter lid position, safeguarding internal components and maintaining proper operating pressure. With an 8.5-inch diameter closure lid, the kit ships complete with an air relief valve, PSI gauge, lock nut, lid O-ring, and lid wrench. Each...

Pentair Triton II & C-3 Filter 1/4" Air Relief Strainer — Part 154578

The OEM Pentair Air Relief Strainer 154578 is a precisely engineered 1/4-inch replacement component for Pentair Triton II and Triton C-3 pool and spa sand filters. With a 1-1/4-inch diameter, this part ensures effective air venting within the filtration system by allowing excess trapped air to release. This action preserves ideal internal pressure levels and guards against system stress caused by air pockets. Constructed for...

Pentair Triton II & System 3 Filter Air Bleeder Tee — Part 154689Z

The OEM Pentair Air Bleeder Tee 154689Z is an essential air management fitting designed for Triton II and System 3 pool and spa filter systems. This tee assembly enables the controlled release of trapped air from within the filter tank, helping to stabilize internal pressure and keep the system running efficiently. Effective air bleeding prevents potential component damage from air accumulation and promotes reliable filtration...

Pentair Triton II & Tagelus Filter Closure Wrench — Part 154512

The OEM Pentair Closure Wrench 154512 is a 6-inch plastic tool specifically built for opening and securing closures on Pentair Triton II and Tagelus pool filters. It works with models including TA30D, TA40D, TA50D, TA60D, TR40, TR50, and TR100, and is shaped to deliver a snug, reliable grip on both top and side-mount valve closures. Constructed from sturdy plastic, this wrench is designed for repeated...

Pentair Triton II 6" V-Threaded Filter Closure (Tan) — Part 154559

The OEM Pentair V Threaded Closure 154559 is a 6-inch tan replacement lid designed specifically for Pentair Triton II sand filters. This closure delivers a firm, leak-resistant seal that is critical for preserving proper operating pressure and ensuring peak filter performance. Built from heavy-duty materials, it is made to hold up against the demanding conditions found in pool environments and the stresses of regular maintenance...

Pentair Triton II Filter 2" Bulkhead Kit — Part 154714

The Pentair 154714 Bulkhead Kit is a 2-inch factory-original replacement package built for Triton II sand filters, covering models TR40, TR50, TR60, TR100, and TR140. This OEM-grade assembly establishes a secure, leak-resistant junction between the filter tank and your plumbing infrastructure, preserving optimal filtration under pressurized operating conditions. Every component required for a professional-quality seal is included: bulkhead body, locknut, internal spacer, external spacer, O-ring,...

Pentair Triton II Sand Filter Diffuser Assembly — Part 154599

The OEM Pentair Diffuser Assembly 154599 is a core component for Triton II and Triton C-3 sand filters, engineered to spread incoming water evenly over the sand bed for maximum filtration efficiency. This balanced distribution prevents channeling—a condition that can erode performance and reduce water clarity over time. By encouraging uniform sand bed utilization, the diffuser also prolongs the life of your filtration media and...

Pentair Union Body 1.5" x 2" Black | 87202211

The Pentair 87202200 Union Body is designed for 1.5" x 2" plumbing connections in pool and spa systems, offering a solid and serviceable junction point. This union body allows plumbing to be separated without sawing through pipes, streamlining equipment servicing and component swaps. Its rugged construction guarantees a drip-free seal between connected parts and works across a variety of Pentair filtration configurations. Engineered to withstand...