Pentair FNS Filter Clamp Band Assembly — Part 195351

Secure your filter tank with confidence using the genuine OEM Pentair 195351 Clamp Band Assembly, engineered specifically for Pentair FNS pool and spa D.E. filters. This factory-spec component fits the FNS24, FNS36, FNS48, and FNS60 models and serves the essential purpose of locking the tank lid firmly in place to preserve airtight, leak-free operation. Fabricated from corrosion-resistant, heavy-duty materials, it withstands prolonged contact with treated...

Pentair FullFloXF C-Series Filter Replacement Cartridge — Part 170102

The Pentair 170102 is a factory-original replacement cartridge engineered for FullFloXF C-Series filters, including the C-620 model. Offering 155 sq ft of filtration media, this OEM cartridge provides substantial surface area that is well suited for large residential pool systems. Its precision-pleated construction, combined with open 3-inch top and bottom openings, enables a seamless drop-in swap during filter maintenance. The cartridge is built to handle...

Pentair FullFloXF Filter Backwash Valve Handle — Part 178817

Restore full control of your backwash valve with the Pentair 178817 replacement handle, purpose-built for FullFloXF filter systems. This genuine OEM component allows you to toggle effortlessly between filter and backwash positions, keeping your filtration cycle running at peak effectiveness. Crafted from high-strength materials, the handle stands up to repeated daily use without loosening or wearing down. Its precise engineering guarantees a snug, factory-correct fit...

Pentair FullFloXF Filter Bulkhead Kit — Part 178829

Keep your FullFloXF cartridge filter sealed and performing flawlessly with the Pentair 178829 Bulkhead Kit. This genuine OEM package ships with a precision-molded bulkhead fitting paired with a matching O-ring, delivering everything needed to establish a watertight connection and restore pressure integrity. Engineered from chemically resistant, heavy-duty compounds, both components hold up under sustained exposure to chlorinated water and high operating pressures. Compatible across the...

Pentair FullFloXF Filter Drain Plug With O-Ring — Part 178816

The Pentair 178816 Drain Plug with O-Ring is a factory-original replacement component engineered for Pentair FullFloXF 4000 Series, C Series, and F Series filter systems. This package pairs a sturdy drain plug with a precision-fit O-ring to form a secure, watertight closure at the drain port, which is essential for preserving filtration efficiency and preventing unwanted water loss. The drain plug enables convenient tank draining...

Pentair Gray Wheel for Legend Platinum Pool Cleaners | LLC6PMG

The OEM Pentair Gray Wheel LLC6PMG is a factory-replacement wheel engineered for Legend Platinum pool cleaners, specifically models LL105PM and LL105PMT. This component is essential for maintaining fluid, uninterrupted cleaner movement across all pool surfaces. Fabricated from rugged materials, it withstands the demands of daily pool cleaning along with constant exposure to water treatment chemicals and abrasive surfaces. Sold without bearings, this wheel installs quickly...

Pentair Great White & Dorado Sectional & Leader Hose — Part 41200-0130

The Pentair 41200-0130 Sectional Hose Kit with Leader is a factory-grade replacement engineered for the Kreepy Krauly Great White suction-side pool cleaner. This 40-foot gray hose assembly features both male and female segments along with a leader section that connects directly to the cleaner head. Manufactured from premium-grade, flexible plastic, it provides smooth, kink-resistant operation and gentle handling across pool surfaces. The ample length accommodates...

Pentair GW9507 Cam Kit | Great White Pool Cleaner Replacement Part

Restore reliable obstacle navigation to your automatic pool cleaner with the genuine Pentair Cam Kit GW9507, engineered for the Kreepy Krauly Great White model GW9500 and Dorado cleaners. This kit ships with both 2-leg and 3-leg cam inserts that partner with the lift brush to redirect the cleaner whenever it encounters drains, steps, corners, or other pool-floor obstructions. By periodically cycling the cleaner's steering direction,...

Pentair Heat Exchanger and Chimney Gasket Kit for ETI 400 Heaters - Part 475615

Ensure airtight sealing in your Pentair ETI 400 High-Efficiency Pool Heater with the Pentair 475615 Heat Exchanger and Chimney Gaskets Kit. This factory-original gasket set delivers the tight seals required at both the heat exchanger and chimney interfaces, promoting safe combustion and sustaining top-level heater efficiency. Properly sealed joints prevent unwanted air and gas escape, which in turn supports steady combustion cycles and dependable heating...

Pentair HiFlow Multiport Valve Handle — Replacement Part 272520

The Pentair 272520 Valve Handle is a genuine OEM replacement engineered for use with Pentair HiFlow Multiport Valves in professional pool and spa installations. Key Benefits Complete Multiport Control: Purpose-built for HiFlow Multiport Valves, this handle provides accurate selection between filter, rinse, backwash, and waste positions with a smooth, confident motion. Resilient Construction: Manufactured from high-durability materials engineered to resist UV radiation, outdoor weathering, and...

Pentair iChlor & IntelliChlor Acid Wash Stand Kit | 523103

Keep your salt chlorination system performing at its best with the genuine Pentair Acid Wash Stand Kit 523103, purpose-built for IntelliChlor and iChlor salt chlorine generators. This factory-original maintenance kit provides everything needed to safely and effectively dissolve mineral deposits from your salt cell, restoring proper chlorine output and protecting your investment. Supplied with a dedicated cleaning stand and replacement O-rings, the kit streamlines the...

Pentair iChlor Flow Switch with Male Pipe Thread | 523100

Safeguard your iChlor Salt Chlorine Generator against dry-fire damage with the Pentair 523100 Flow Switch. This genuine factory safety device monitors water movement through the plumbing loop and only permits the chlorinator cell to energize when adequate flow is confirmed. If circulation drops below the safe threshold, the switch signals the system to stand down, protecting the cell and associated electronics from heat buildup and...

Pentair IntelliChlor & EasyTouch Plumbing Unions | Part 520595

Keep your salt chlorination plumbing secure and watertight with the Pentair 520595 Union Kit. Engineered as a factory-authorized replacement for IntelliChlor systems spanning the IC15, IC20, IC40, and IC60 product line, this two-union set creates strong, serviceable junctions between the chlorinator cell and your pool piping. Every kit arrives with matched couplers, O-rings, and locking nuts, so each connection seats firmly and resists leaks even...

Pentair IntelliFlo 3HP Pump Impeller — Part 356237

Restore peak hydraulic performance with the genuine Pentair 356237 Impeller, a factory-authorized 3.0 HP component built for IntelliFlo Variable Speed Pool Pumps manufactured after October 2020. This precision-crafted impeller drives powerful water circulation throughout your pool system while complementing the advanced energy-saving technology that IntelliFlo pumps are known for. Suitable for IntelliFlo VSF, SVRS, 2 VST, and VS models, it serves as a vital internal...

Pentair IntelliFlo3 Union Kit — 3HP | 2" & 2.5" Connections (410028)

The Pentair 410028 Union Kit is a factory-spec replacement crafted specifically for IntelliFlo3 3HP variable speed pumps, offering dual compatibility with 2-inch and 2.5-inch plumbing configurations. This assembly is essential for anchoring the interface between the pump unit and the connected piping, delivering drip-free operation and unwavering performance. Constructed from heavy-duty materials, it is purpose-built to handle the rigorous demands of pool system environments. Every...

Pentair IntelliTouch & EasyTouch Load Center Circuit Breaker | 521142Z

Guard your pool automation investment with the Pentair 521142Z Load Center Circuit Breaker. Rated at 12A and 50V, this resettable OEM breaker is purpose-matched for IntelliTouch and EasyTouch control systems as well as Pentair Salt Chlorine Generators. It stands between your sensitive electronics and the power surges or voltage anomalies that can cause permanent damage, tripping quickly when conditions exceed safe limits and resetting without...

Pentair Kreepy Krauly Pleated Seal Replacement | 370483Z

The genuine Pentair 370483Z Pleated Seal is an essential replacement part for Kreepy Krauly automatic pool cleaners produced from 2013 onward. This precisely engineered seal creates firm contact between the cleaner's suction opening and the pool surface, capturing debris efficiently and preventing particles from escaping during operation. Its pleated profile provides the flexibility needed to conform to fiberglass, vinyl, and concrete surfaces alike, ensuring reliable...

Pentair Kreepy Krauly Suction Cleaner Bumper Assembly – Replacement Part | 370499Z

The Pentair Bumper Assembly 370499Z is a factory-specification replacement part engineered exclusively for Kreepy Krauly suction side pool cleaners. Serving as the cleaner's primary contact point with pool walls and obstacles, this bumper absorbs impacts and redirects the unit's path, enabling thorough coverage of every pool surface while shielding both the cleaner housing and your pool finish from scuffs and scratches. Built from flexible yet...

Pentair Kreepy Krauly Weight Holder Replacement | 370498Z

The genuine Pentair 370498Z Weight Holder is a factory replacement component tailored for the 2013 Kreepy Krauly automatic pool cleaner. This kit ships with both the weight holder and a dive float restrictor, two parts that work in tandem to regulate the cleaner's buoyancy and attack angle as it moves through the water. Without properly functioning weight components, your cleaner may struggle to scale walls...

Pentair Letro Booster Pump Impeller Replacement (New Style) | LA05L

The genuine Pentair LA05L Impeller is a factory-engineered replacement component built for newer-generation Pentair Letro Booster Pumps. This impeller serves as the driving force behind pressure-side pool cleaners, producing robust and consistent water flow throughout the system. Precision-manufactured from wear-resistant materials, it ensures your booster pump operates at maximum efficiency. With dependable pressure output, this impeller enables your cleaner to achieve thorough coverage across every...