Polaris All-Purpose Debris Bag for 360 & 380 Pool Cleaners | 9-100-1014

The genuine Polaris 9-100-1014 All Purpose Bag delivers factory-grade filtration for your Polaris Vac-Sweep 360 and 380 pool cleaners, as well as Black Max 360 and 380 units. Engineered with a robust Velcro fastening system, this OEM bag traps everything from fine sand and silt particles to larger leaves and twigs, ensuring your pool stays crystal clear after every cycle. Its dependable containment design prevents...

Polaris All-Purpose Zippered Debris Bag for 380 & 360 Cleaners | 9-100-1021

The genuine Polaris 9-100-1021 Zippered All-Purpose Debris Bag is a premium replacement built to work flawlessly with Polaris 380 and 360 pressure-side pool cleaners. Equipped with a convenient zipper for effortless emptying, this bag simplifies routine pool care while efficiently trapping dirt, leaves, and assorted debris. Manufactured to Polaris original standards, it delivers a snug attachment and dependable filtration every time. Whether you need to...

Polaris Atlas Cyclonic Scrubbing Turbine Replacement R0949100

Upgrade your pool cleaning power with the genuine Polaris R0949100 Cyclonic Scrubbing Turbine Assembly, engineered exclusively for Polaris Atlas and Atlas XT suction-side cleaners. This sophisticated assembly leverages HALOª technology to trap everything from microscopic silt and sand to larger leaves and organic matter, channeling it directly into your filtration system. The dual-function turbine generates forceful cyclonic action while integrated scrubbing brushes actively loosen and...

Polaris Atlas Pool Cleaner Direction Control Device Side A | R0916100

The Polaris R0916100 is a genuine Side A direction control device manufactured for Polaris Atlas and Atlas XT suction-side pool cleaners. This steering component governs the cleaner's travel patterns, ensuring it systematically covers every inch of your pool rather than retracing the same paths. Crafted from resilient, pool-grade materials for extended durability, it helps maintain accurate, predictable movement and steady cleaning output. Simple to install...

Polaris Atlas Pool Cleaner Direction Control Device Side B | R0916200

The Polaris R0916200 is a factory-original Side B direction control device built for Polaris Atlas and Atlas XT pool cleaners. Functioning as an integral part of the cleaner's guidance system, this component ensures the unit follows accurate, efficient routes that cover the full pool surface, including walls and tight corners. Constructed from durable OEM-grade materials that withstand both chemical exposure and repetitive mechanical action, it...

Polaris Atlas Pool Cleaner Drive Shaft Assembly Replacement | R0915700

The Polaris R0915700 is an authentic OEM drive shaft assembly crafted for Polaris Atlas and Atlas XT suction-side pool cleaners. This component is central to the cleaner's locomotion system, channeling mechanical energy to produce the traction and steering precision needed for thorough pool coverage. Fabricated from hardwearing materials that meet Polaris factory standards, it provides the structural integrity required for sustained, trouble-free operation. Straightforward to...

Polaris Atlas Pool Cleaner Engine Assembly Replacement | R0915600

The Polaris R0915600 is a factory-authentic engine assembly built as a direct drop-in replacement for Polaris Atlas and Atlas XT suction-side pool cleaners. Serving as the mechanical heart of your cleaner, this assembly drives the internal mechanisms that power consistent, thorough debris collection. Manufactured from robust, premium-quality components, it delivers the kind of dependable performance that stands up to years of regular use. Its intuitive...

Polaris Atlas Pool Cleaner Front Body Panel Replacement | R0948100

Keep your Polaris suction-side cleaner in top condition with the genuine Polaris R0948100 Front Body Panel, a factory-original part made for the Atlas and Atlas XT models. This navy-colored front panel restores the cleaner's structural integrity and outward appearance, while shielding internal mechanisms from impact, debris, and general wear. Built from premium, impact-resistant material, it locks firmly into place to maintain both aesthetics and operational...

Polaris Atlas Pool Cleaner Rubber Track V2 Replacement | R0916500

The Polaris R0916500 is an authentic V2 rubber track designed as a direct replacement for Polaris Atlas and Atlas XT suction-side pool cleaners. Manufactured from tough, flexible rubber compound, this track provides the grip and surface contact your cleaner needs to traverse pool floors, climb walls, and navigate contours without losing traction. Its deep-tread pattern resists slipping and premature wear, helping the unit maintain steady...

Polaris Atlas Pool Cleaner Top Cover Assembly Replacement | R0948000

Restore your suction-side pool cleaner with the genuine Polaris R0948000 Top Cover Assembly, purpose-built for the Polaris Atlas and Atlas XT. Featuring a robust navy blue shell and a built-in swivel mechanism, this factory-original cover safeguards the cleaner's sensitive internal parts against debris accumulation and everyday environmental exposure. Replacing a worn or damaged top cover revitalizes your unit's cleaning capability, promotes consistent suction power, and...

Polaris Axle Block Kit Replacement for Pool Cleaners | 9-100-1139

The genuine Polaris 9-100-1139 Axle Block Kit is a factory-original replacement package for Polaris Vac-Sweep 360, 380, TR35P, and TR36P pool cleaners. Containing both front and rear axle blocks along with necessary hardware, this kit is fundamental to preserving proper wheel alignment and steady cleaner travel. Manufactured from robust OEM-grade materials, these blocks supply the structural foundation your wheels need to roll true. Straightforward installation...

Polaris Backplate with Shaft Seal & O-Ring for New Style PB4-60 Pumps | R0536700

The genuine Polaris R0536700 Backplate Kit delivers everything you need to restore the rear seal assembly on your new style PB4-60 Booster Pump in a single package. Bundling the backplate, shaft seal, and O-ring together, this kit addresses the most common sources of pump leaks and pressure loss in one straightforward repair. Each component is manufactured from premium-grade material selected for its ability to withstand...

Polaris Ball Bearing Hose Swivel D20 | Replacement Swivel for Pool Cleaners

The genuine Polaris D20 ball bearing hose swivel is a factory-spec replacement component for Polaris 180, 280, 380, and P39 pressure-side pool cleaners. This precision-engineered swivel permits the feed hose to rotate freely in any direction, eliminating the twisting and kinking that can stall cleaner navigation and reduce debris pickup. Built from heavy-duty materials rated for continuous pool submersion, the D20 delivers season-long durability without...

Polaris Ball Bearing Replacement for Pool Cleaners | 9-100-1108

The genuine Polaris 9-100-1108 Ball Bearing is a critical replacement part that keeps Polaris pool cleaner wheels spinning freely and quietly. Purpose-built for the wheel assemblies of models 360, 380, ATV, TR35P, TR36P, 3900 Sport, and P39, this bearing delivers frictionless rotation for superior cleaner navigation. Its corrosion-resistant construction handles constant exposure to treated pool water and heavy operational demands. Swapping out degraded bearings eliminates...

Polaris Ball Bearing Swivel D21 | Black Replacement Swivel for Pool Cleaners

The genuine Polaris D21 ball bearing swivel in black is an OEM replacement engineered to restore full rotational freedom to the feed hose on Polaris 180, 280, 380, F4TR, and F4000D pool cleaners. When a worn swivel binds up, hose twisting restricts cleaner movement and undermines debris collection. The D21 solves this with smooth ball bearing rotation that keeps the hose flexible and tangle-free throughout...

Polaris Black 6-Foot Feed Hose for 360 & TR36P Pool Cleaners | 9-100-3110

The genuine Polaris Feed Hose 9-100-3110 is a 6-foot black pressure hose built for Polaris 360 and TR36P pool cleaners. This OEM replacement hose is essential for conveying high-pressure water from your pool's return line to the cleaner, fueling its propulsion and debris pickup capabilities. Crafted from tough, pliable materials, it is engineered to withstand the rigors of regular use while sustaining cleaner effectiveness. This...

Polaris Black Feed Hose Float for 360 & TR36P Pool Cleaners | 9-100-1207

The genuine Polaris 9-100-1207 Feed Hose Float is a black replacement float engineered for the Polaris Vac-Sweep 360 Black Max and TR36P pool cleaners. By keeping the feed hose elevated at the correct depth, this float prevents sagging and entanglement that would otherwise impede your cleaner's travel and reduce its effectiveness. Built from robust materials designed for prolonged pool exposure, it maintains proper hose suspension...

Polaris Black Feed Hose Nut for 360 & TR36P Pool Cleaners | 9-100-3112

The genuine Polaris Feed Hose Nut 9-100-3112 is a premium OEM replacement component built for Polaris 360 and TR36P pressure-side pool cleaners. This critical nut anchors connections between the hose assembly, quick disconnect, and pressure relief valve, providing steady water flow and dependable operation. Made from robust materials to handle harsh pool conditions, it serves a key function in maintaining cleaner effectiveness. Simple to install...

Polaris Black Max Double Side Wheel for 360 & 380 Cleaners | Black | 9-100-1004

Get your Polaris Black Max pressure-side cleaner navigating flawlessly again with the authentic 9-100-1004 Double Side Wheel in black. Purpose-built for the Black Max 360 and 380 models, this heavy-duty replacement wheel delivers the traction and stability needed for reliable movement across all pool surfaces. Its robust, chemical-resistant composition stands up to constant immersion in treated pool water without cracking or deteriorating. The direct-fit design...

Polaris Black Zippered All-Purpose Bag for Pool Cleaners | 9-100-1022

The genuine Polaris 9-100-1022 Zippered All-Purpose Bag is a black mesh replacement designed to work with Polaris 280, 360, and 380 pressure-side pool cleaners. Constructed from heavy-duty, reusable mesh fabric, this bag captures leaves, dirt, and other pool contaminants while keeping your water sparkling. The integrated zipper makes disposal fast and tidy, while the secure closure ensures nothing escapes during the cleaning cycle. Purpose-built for...