Polaris WideTrax Replacement Tire for 3900 Sport & P39 Cleaners — Part 48-232

The genuine Polaris 48-232 WideTrax Tire is a factory-original replacement engineered for the Polaris 3900 Sport and P39 pressure-side pool cleaners. Made from premium rubber compound, this tire delivers superior grip and steady traction across all common pool surfaces, including tile, vinyl, fiberglass, plaster, and pebble finishes. It enables confident navigation and empowers your cleaner to ascend walls and negotiate slopes with ease. Dimensioned for...

Pool Cleaner Wheel Ball Bearings by CMP - C60 | 25563-250-000

Keep your Polaris pool cleaner rolling effortlessly with the CMP Wheel Ball Bearings 25563-250-000. These precision-engineered bearings are vital for the seamless movement and traction of Polaris cleaners, including the Atlas 180, 280, and Quattro P40/Sport models. By minimizing wheel friction and ensuring steady contact with pool surfaces, they allow your cleaner to navigate walls and floors with consistent efficiency. Manufactured by Custom Molded Products...

Replacement In-Line Filter Assembly for Polaris Pool Cleaners | CMP 48-080 | 25563-080-000

Protect the inner workings of your Polaris pressure-side pool cleaner with the CMP In-Line Filter Assembly (25563-080-000). This complete assembly slots into the feed line of your Polaris cleaner to intercept sand, grit, and other particles before they can reach delicate internal mechanisms. Built from tough, pool-grade materials, it delivers season after season of dependable debris filtration. Compatible with Polaris models 180, 280, 380, 3900...

Replacement In-Line Filter Screen for Polaris Pool Cleaners | CMP 48-222 | 25563-080-040

Keep your Polaris pool cleaner running at full efficiency with the CMP In-Line Filter Screen (25563-080-040). This precision-made replacement screen fits inside the in-line filter housing to catch leaves, sediment, and fine particles before they work their way into the cleaner's internal mechanisms. Compatible with Polaris 180, 280, 380, TR35P, P39, F4TR, F4000D, and 3900 Sport models, this screen is fabricated from corrosion-resistant material that...

Replacement Small Wheel for Polaris Vac-Sweep 180 & 280 | CMP C16 | 25563-460-000

Get your Polaris Vac-Sweep 180 or 280 cleaner tracking properly again with the CMP Small Wheel 25563-460-000. This replacement idler wheel supplies the tension needed to engage the rear drive wheel, allowing the cleaner to move steadily across pool surfaces for thorough coverage. Molded from tough, wear-resistant material, it stands up to extended underwater operation while remaining light enough for straightforward, quick installation whenever maintenance...

Steering Cam Gear for Hayward Poolvergnuegen 2-Wheel & AquaNaut 200 | PVXH036009

Restore precise navigation to your automatic pool cleaner with the OEM Hayward PVXH036009 Steering Cam Gear. This factory-original replacement component is purpose-built for Hayward Poolvergnuegen 2-Wheel and AquaNaut 200 suction-side cleaners. The steering cam gear is integral to your cleaner's directional system, governing its movement patterns for thorough surface coverage across the entire pool floor. Manufactured from robust, pool-grade materials, this part delivers dependable service...

Tail Sweep Pro Strip Clip by CMP | Replacement for Pool Cleaners | TSP10S | 25563-300-100

Upgrade your Polaris pressure-side cleaner's tail performance with the CMP Tail Sweep Pro Strip Clip 25563-300-100, built to work with the Polaris 360, 380, P39, and 3900 Sport models. This clever accessory solves a common frustration by redirecting the sweep hose jet downward, which eliminates unwanted water spray over the pool edge that can soak nearby windows, walkways, and landscaping. Beyond splash prevention, the Tail...

Turbine Ball Bearing by CMP | Fits Polaris Vac-Sweep 180 & 280 | C80 | 25563-260-000

Restore smooth, responsive movement to your Polaris pool cleaner with the CMP Turbine Ball Bearing 25563-260-000, a premium replacement component engineered for the Polaris Vac-Sweep 180 and 280. This precision bearing sits on the turbine drive shaft, enabling frictionless rotation that powers the cleaner's propulsion across your pool floor. Manufactured to meet or surpass original equipment standards, it delivers the consistent rotational accuracy your cleaner...

Turbine Ball Bearing for Polaris Vac-Sweep 180 & 280 Cleaners C80 | Aquastar P1002

The AquaStar P1002 Turbine Ball Bearing serves as a precision replacement for Polaris Vac-Sweep 180 and 280 pool cleaners, providing critical support to the turbine drive shaft for seamless rotational movement. Crafted from robust materials that meet or surpass original equipment standards, this bearing promotes fluid turbine action and helps your cleaner navigate pool surfaces with full agility. Its quality construction delivers extended service life...

Universal Wall Fitting by CMP | Fits Polaris Pool Cleaners | 6-500-00 | 25563-160-000

The CMP Universal Wall Fitting 25563-160-000 provides the essential plumbing bridge between your Polaris automatic pool cleaner and the pool's dedicated return line. Engineered to work with Polaris models 180, 280, 360, and 380, this fitting anchors into the pool wall and accepts the cleaner's feed hose, establishing a sealed, pressure-stable connection that powers your cleaner's movement and suction. Manufactured from tough, pool-grade materials that...

Universal Wall Fitting Connector Assembly by CMP | Fits Polaris 360 | 9-100-3008 | 25563-150-360

Get your Polaris Vac-Sweep 360 back to full working order with the CMP Universal Wall Fitting (UWF) Connector Assembly 25563-150-360. This all-in-one replacement kit delivers every component needed to re-establish a solid, pressure-tight link between your cleaner and the pool's dedicated return line: the universal wall fitting body, a built-in filter screen, UWF quick-disconnect O-ring, pressure relief valve, and hose nut. Together, these parts work...

Universal Wall Fitting Quick Disconnect by CMP | Fits Polaris Cleaners | D29 | 25563-029-000

Simplify cleaner hookup and removal with the CMP Universal Wall Fitting Quick Disconnect 25563-029-000, designed for Polaris Vac-Sweep 180, 280, P39, and 380 automatic pool cleaners. This component creates a tool-free snap connection between your Polaris cleaner hose and the pool's return line wall fitting, so attaching or detaching the cleaner takes just seconds. Beyond convenience, the quick disconnect maintains full water pressure and uninterrupted...

Water Management System for Polaris Vac-Sweep 280 Cleaner K25 | AquaStar P1009

The AquaStar P1009 Water Management System is a premium replacement component engineered to keep your Polaris Vac-Sweep 280 pool cleaner operating at full capacity by regulating internal water circulation. This essential part ensures powerful suction for thorough dirt and debris removal, helping maintain crystal-clear pool water. Constructed to resist chemical degradation and withstand heavy-duty operation, the P1009 integrates quickly into Polaris 280 and Vac-Sweep 280...

Zodiac MX Series Flow Regulator Valve Replacement - FRV100

The OEM Zodiac Flow Regulator Valve FRV100 safeguards your Zodiac MX series suction-side pool cleaner by controlling the water pressure that reaches the unit. Designed specifically for the MX6, MX8, and MX8 Elite models, this valve tempers excessive flow that can accelerate component wear, helping internal gears and seals last significantly longer. Crafted from chemical-resistant, pool-grade materials, the FRV100 snaps into position without tools and...