400015Z Pentair Impeller Assembly | WhisperFloXF & IntellifloXF Pumps | 3 HP

Unlock the full hydraulic potential of your XF-series pump with the genuine Pentair WhisperFloXF Impeller 400015Z, a high-output component engineered for WhisperFloXF and IntelliFloXF Variable Speed 3 HP pumps. As a core element of Pentair’s XF Series lineup, this impeller is central to delivering the high flow volumes and precise water movement these pumps are known for, all while keeping operational noise to a minimum....

U.S. Seal Premium Mechanical Shaft Seal for Pool Pumps | PS-3890 | R0479400

The U.S. Seal Mechanical Shaft Seal PS-3890 is a premium-grade replacement component built to fit a wide array of Jandy pump models, including the Stealth SHPF/SHPM, PlusHP PHPF/PHPM, FloPro FHPM, WaterFeature WFTR, WaterFall SWF, MaxHP MHPM series pumps, and Jandy ePump variable speed pumps. Combining carbon and ceramic sealing surfaces, this shaft seal delivers robust wear resistance and a dependable barrier against water leakage, keeping...

Wet End Volute Pot Kit for WhisperFlo & IntelliFlo Pumps 3HP | 357149 | SW-21-150 by Swimables

Get your high-performance pump back on track with the Swimables Wet End Volute Pot Kit SW-21-150, purpose-built for 3 HP Pentair WhisperFlo and IntelliFlo pumps. This complete wet-end overhaul package contains every part you need—pump housing, seal plate, diffuser, strainer basket, drain plugs, O-rings, and locking rings—to resolve leaks, seal failures, and reduced water throughput in one go. Constructed from industrial-strength materials for lasting durability,...

Wet End Volute Pot Kit for WhisperFlo & IntelliFlo Pumps 0.5-2HP | 357149 | SW-21-149 by Swimables

Restore your pump to peak condition with the Swimables Wet End Volute Pot Kit SW-21-149, a full-service rebuild package built for 0.5HP - 2HP Pentair WhisperFlo and IntelliFlo pumps. Every critical wet-end component is included—pump housing, seal plate, diffuser, strainer basket, drain plugs, O-rings, and locking rings—so you can address leaks, worn seals, and diminished flow in a single repair session. Each part is manufactured...

Pentair WhisperFlo 1HP - 1.5HP Pump Impeller Replacement by Swimables - Part 073128 / SW-21-003

Get your WhisperFlo pump back to full power with the Swimables SW-21-003 Impeller, engineered as a precise drop-in alternative for the 073128 part in 1HP to 1.5HP models. This carefully designed impeller promotes vigorous water movement and consistent pump output, keeping your pool's circulation running at its best. Built from hardwearing, chemical-resistant materials, it thrives in the demanding conditions of pool pump operation. Installation is...

Pentair WhisperFlo 1.5HP - 2HP Pump Impeller Replacement by Swimables - Part 073129 / SW-21-004

Restore peak water circulation in your pool with the Swimables SW-21-004 Impeller, purpose-built for WhisperFlo pumps rated between 1.5HP and 2HP. This drop-in replacement for the 073129 impeller delivers precise fitment and strong hydraulic output, keeping your pump running at maximum efficiency. Engineered from resilient, pool-grade materials, it resists wear and corrosion over countless operating hours. Swap it in quickly to get your circulation system...

Pentair WhisperFlo .5 HP Pump Impeller Replacement by Swimables - Part 073126 / SW-21-001

Get your Pentair WhisperFlo 0.5 HP pump circulating water like new with the Swimables Impeller SW-21-001, a drop-in substitute for the 073126 impeller. Precision-formed from corrosion-resistant materials, this impeller rebuilds the hydraulic performance your pump has lost over time, delivering steady water flow, consistent pressure, and reliable filtration support. Its exact-match dimensions ensure a trouble-free fit inside the WhisperFlo pump housing, and the straightforward installation...

WhisperFlo Pump Impeller for Pentair 0.75HP - 1HP - Swimables 073127 SW-21-002

Bring your Pentair WhisperFlo pump back to full strength with the Swimables Impeller SW-21-002, a precision-built replacement for the 073127 part used in 0.75 - 1 HP models. This impeller is the driving force behind your pump's water circulation, and installing a fresh one restores the flow rate, pressure, and filtration efficiency your pool system was designed to deliver. Manufactured from materials engineered to resist...

Pump Impeller for Pentair 2HP Full Rated / 2.5HP Up Rated - Swimables 355093 SW-21-305

Maximize the output of your high-horsepower Pentair pool pump with the Swimables Impeller SW-21-305, a direct-fit replacement for Pentair part number 355093. Built for pumps equipped with a 2 HP full-rated or 2.5 HP up-rated motor, this impeller works with Pentair Challenger, Pinnacle, SuperFlo, and SuperMax models to push high-volume water flow through your pool's circulation loop. Crafted from robust, chemical-resistant material, the SW-21-305 is...

Pump Impeller for Pentair 1HP Full Rated / 1.5HP Up Rated - Swimables 355074 SW-21-303

Restore your Pentair pool pump to factory-fresh circulation with the Swimables Impeller SW-21-303, the go-to replacement for Pentair part number 355074. Compatible with Pentair Challenger, Pinnacle, SuperFlo, and SuperMax pumps fitted with a 1 HP full rated or 1.5 HP up rated motor, this impeller is shaped to generate the precise flow and pressure your system was built to produce. Formed from tough, chemical-resistant materials,...

Pump Impeller for Pentair 1.5HP Full Rated / 2HP Up Rated - Swimables 355086Z SW-21-304

Power up your Pentair pool pump's circulation with the Swimables Impeller SW-21-304, a precision replacement for Pentair part number 355086z. Designed to work with Pentair Challenger, Pinnacle, SuperFlo, and SuperMax pumps running a 1.5 HP full-rated or 2 HP up-rated motor, this impeller delivers the aggressive water movement these higher-horsepower systems demand. Molded from industrial-strength materials that shrug off chemical exposure and mechanical wear, the...

Pump Hardware Assembly for Pentair WhisperFlo & IntelliFlo Pumps | Swimables SW-21-123

Take the guesswork out of pump rebuilds with the Swimables Hardware Assembly SW-21-123, a comprehensive fastener set tailored for Pentair WhisperFlo and IntelliFlo pool pumps. Every bolt, screw, washer, and nut you need is right here in one convenient package, including motor bolts, seal plate bolts with washers, an impeller screw with rubber washer, diffuser screws, a foot and insert bolt, plus all supporting hardware....

Pump Impeller for Pentair 0.75HP Full Rated / 1HP Up Rated - Swimables 355067Z SW-21-302

Give your Pentair pump the fresh impeller it needs with the Swimables SW-21-302, a factory-spec replacement for the Pentair 355067Z. Engineered for pumps equipped with a 0.75 HP full-rated or 1 HP up-rated motor, this impeller integrates seamlessly with Pentair Challenger, Pinnacle, SuperFlo, and SuperMax models. Its precision-crafted blade profile restores the strong, consistent water movement your pool filtration system requires. Constructed from materials chosen...

Pump Impeller for Pentair 0.5HP Full Rated / 0.75HP Up Rated - Swimables 355043 SW-21-301

Revive the water-moving power of your Pentair pool pump with the Swimables Impeller SW-21-301, an exact-match replacement for the Pentair 355043. Sized for pumps running a 0.5 HP full-rated or 0.75 HP up-rated motor, this impeller fits Pentair Challenger, Pinnacle, SuperFlo, and SuperMax models. Precision-molded from resilient materials, it restores the flow rate and pressure output your pool circulation system was designed to deliver. Swapping...

Hayward 2HP Impeller with Screw for TriStar & EcoStar Pumps | SPX3220C

The genuine Hayward SPX3220C Impeller with Screw is a high-output replacement component tailored for 2HP Hayward TriStar and EcoStar pool pumps, including the TriStar VS 950 series. This impeller is the driving force behind effective water circulation, generating the flow and pressure the pump needs for thorough filtration. It arrives with a matched impeller screw that fastens securely to the motor shaft for vibration-free, leak-free...

Hayward 1.5HP - 2HP Impeller with Screw for TriStar Pumps | SPX3215C

The factory-original Hayward SPX3215C Impeller with Screw is an authentic replacement engineered for Hayward TriStar pool pumps in the 1.5HP to 2HP range. Compatible with both SP3200 and SP3200EE series models, this impeller utilizes a closed-face vane geometry that maximizes hydraulic throughput while keeping energy consumption low. Its precision-molded design restores proper circulation and helps the filtration system operate at its intended efficiency. Packaged with...

Hayward 1HP Impeller with Screw for TriStar Pool Pump | SPX3210C

The genuine Hayward SPX3210C Impeller with Screw is a factory-spec replacement built for 1HP Hayward TriStar pool pumps, including the TriStar VS 900 lineup. As the component directly responsible for moving water through the pump, a properly functioning impeller is essential for maintaining healthy flow rates and adequate system pressure. This kit ships with the matching impeller screw for solid attachment to the motor shaft...

Hayward 0.75HP Impeller for TriStar SP3200EE Series Pump | SPX3207CM

The factory-original Hayward SPX3207CM Impeller is an authentic component purpose-built for Hayward TriStar pool pumps. Responsible for propelling water through the circulation system, this impeller ensures robust flow and consistent pump output. It fits TriStar 3/4 HP pumps in both energy-efficient and full-rated configurations, as well as TriStar 1 HP standard-efficient and max-rated models. Constructed from tough, chemical-resistant plastic, the SPX3207CM stands up to the...

Hayward 2.7HP Power End Assembly for TriStar VS G3 Variable Speed Pump | SPX3206Z1VSPE

The genuine Hayward SPX3206Z1VSPE Power End Assembly is a comprehensive replacement unit built for Hayward TriStar VS 950 and EcoStar SP3400VSP pool pumps. It ships with a 2.7 HP variable speed motor, integrated drive and display, along with every supporting part -- diffuser screws, O-rings, impeller with screw, shaft seal assembly, and motor mounting hardware. By upgrading to this assembly, pool owners can realize energy...

Hayward Impeller Screw for TriStar & EcoStar Pool Pumps | SPX3200Z1

The genuine Hayward SPX3200Z1 Impeller Screw anchors the impeller firmly onto the motor shaft inside Hayward TriStar and EcoStar pool pumps. Although small in size, this fastener is vital to pump stability -- without it, the impeller can shift or detach, causing significant performance loss or mechanical damage. Crafted from corrosion-resistant material, it holds up against constant water exposure, chemical contact, and the rotational forces...