Polaris Atlas Suction Side Pool Cleaner | FSATLAS

The Polaris ATLAS Suction-Side Pool Cleaner FSATLAS harnesses proprietary HALO technology to pull fine silt, sand, and larger organic matter straight through an unobstructed pathway into your pool's filtration system. Integrated spinning brushes actively scrub stubborn, adhered particles from every surface, delivering comprehensive floor-to-waterline cleaning. Proprietary HALO Technology provides unmatched debris clearance by channeling everything from microscopic silt to long, bulky debris through an unobstructed...

Polaris Axle Block Kit Replacement for Pool Cleaners | 9-100-1139

The genuine Polaris 9-100-1139 Axle Block Kit is a factory-original replacement package for Polaris Vac-Sweep 360, 380, TR35P, and TR36P pool cleaners. Containing both front and rear axle blocks along with necessary hardware, this kit is fundamental to preserving proper wheel alignment and steady cleaner travel. Manufactured from robust OEM-grade materials, these blocks supply the structural foundation your wheels need to roll true. Straightforward installation...

Polaris Backplate with Shaft Seal & O-Ring for New Style PB4-60 Pumps | R0536700

The genuine Polaris R0536700 Backplate Kit delivers everything you need to restore the rear seal assembly on your new style PB4-60 Booster Pump in a single package. Bundling the backplate, shaft seal, and O-ring together, this kit addresses the most common sources of pump leaks and pressure loss in one straightforward repair. Each component is manufactured from premium-grade material selected for its ability to withstand...

Polaris Ball Bearing Hose Swivel D20 | Replacement Swivel for Pool Cleaners

The genuine Polaris D20 ball bearing hose swivel is a factory-spec replacement component for Polaris 180, 280, 380, and P39 pressure-side pool cleaners. This precision-engineered swivel permits the feed hose to rotate freely in any direction, eliminating the twisting and kinking that can stall cleaner navigation and reduce debris pickup. Built from heavy-duty materials rated for continuous pool submersion, the D20 delivers season-long durability without...

Polaris Ball Bearing Replacement for Pool Cleaners | 9-100-1108

The genuine Polaris 9-100-1108 Ball Bearing is a critical replacement part that keeps Polaris pool cleaner wheels spinning freely and quietly. Purpose-built for the wheel assemblies of models 360, 380, ATV, TR35P, TR36P, 3900 Sport, and P39, this bearing delivers frictionless rotation for superior cleaner navigation. Its corrosion-resistant construction handles constant exposure to treated pool water and heavy operational demands. Swapping out degraded bearings eliminates...

Polaris Ball Bearing Swivel D21 | Black Replacement Swivel for Pool Cleaners

The genuine Polaris D21 ball bearing swivel in black is an OEM replacement engineered to restore full rotational freedom to the feed hose on Polaris 180, 280, 380, F4TR, and F4000D pool cleaners. When a worn swivel binds up, hose twisting restricts cleaner movement and undermines debris collection. The D21 solves this with smooth ball bearing rotation that keeps the hose flexible and tangle-free throughout...

Polaris Black 6-Foot Feed Hose for 360 & TR36P Pool Cleaners | 9-100-3110

The genuine Polaris Feed Hose 9-100-3110 is a 6-foot black pressure hose built for Polaris 360 and TR36P pool cleaners. This OEM replacement hose is essential for conveying high-pressure water from your pool's return line to the cleaner, fueling its propulsion and debris pickup capabilities. Crafted from tough, pliable materials, it is engineered to withstand the rigors of regular use while sustaining cleaner effectiveness. This...

Polaris Black Feed Hose Float for 360 & TR36P Pool Cleaners | 9-100-1207

The genuine Polaris 9-100-1207 Feed Hose Float is a black replacement float engineered for the Polaris Vac-Sweep 360 Black Max and TR36P pool cleaners. By keeping the feed hose elevated at the correct depth, this float prevents sagging and entanglement that would otherwise impede your cleaner's travel and reduce its effectiveness. Built from robust materials designed for prolonged pool exposure, it maintains proper hose suspension...

Polaris Black Feed Hose Nut for 360 & TR36P Pool Cleaners | 9-100-3112

The genuine Polaris Feed Hose Nut 9-100-3112 is a premium OEM replacement component built for Polaris 360 and TR36P pressure-side pool cleaners. This critical nut anchors connections between the hose assembly, quick disconnect, and pressure relief valve, providing steady water flow and dependable operation. Made from robust materials to handle harsh pool conditions, it serves a key function in maintaining cleaner effectiveness. Simple to install...

Polaris Black Max Double Side Wheel for 360 & 380 Cleaners | Black | 9-100-1004

Get your Polaris Black Max pressure-side cleaner navigating flawlessly again with the authentic 9-100-1004 Double Side Wheel in black. Purpose-built for the Black Max 360 and 380 models, this heavy-duty replacement wheel delivers the traction and stability needed for reliable movement across all pool surfaces. Its robust, chemical-resistant composition stands up to constant immersion in treated pool water without cracking or deteriorating. The direct-fit design...

Polaris Black Zippered All-Purpose Bag for Pool Cleaners | 9-100-1022

The genuine Polaris 9-100-1022 Zippered All-Purpose Bag is a black mesh replacement designed to work with Polaris 280, 360, and 380 pressure-side pool cleaners. Constructed from heavy-duty, reusable mesh fabric, this bag captures leaves, dirt, and other pool contaminants while keeping your water sparkling. The integrated zipper makes disposal fast and tidy, while the secure closure ensures nothing escapes during the cleaning cycle. Purpose-built for...

Polaris Booster Pump Gasket & O-Ring Kit by Aladdin | GO-KIT71

When it's time to swap out the motor on your Polaris Booster Pump, the Go-Kit 71 from Aladdin delivers every sealing component you need in a single package. This GO-KIT71 Gasket & O-Ring Kit bundles together the complete set of gaskets and O-rings required for a thorough motor replacement, guaranteeing a tight, leak-free connection and peak pump operation. Every piece in the kit is crafted...

Polaris Booster Pump Soft Tube Connector Replacement | CMP 25563-133-000

Establish a fast, leak-free link between your soft hose and Polaris PB4-60 booster pump using the CMP Soft Tube Connector 25563-133-000. This connector is shaped to mate with the pump inlet and locks down with the included C-lock clip, creating a solid junction that withstands the pressure and vibration of daily pump operation. Pool owners and technicians appreciate the straightforward hookup process that gets the...

Polaris Booster Pump Softube Quick Connect Replacement | CMP R0621000 | 25563-134-000

Simplify your Polaris pool cleaner plumbing with the CMP Softube Quick Connect 25563-134-000. This black connector fitting is engineered for Polaris booster pumps built from 2011 onward, offering a fast snap-on attachment that joins the soft hose to the pump without wrestling with clamps or adhesives. Its streamlined form factor reduces setup time and delivers a solid, pressurized link that keeps your cleaning system running...

Polaris Bottom Base with Bracket for Vac-Sweep Cleaners | White | Part A10

Restore your Polaris Vac-Sweep 180 to factory form with the OEM A10 Bottom Base with Bracket. This white base assembly acts as the structural foundation of your pressure-side cleaner, cradling the frame and shielding vital internal mechanisms from damage. A generously sized opening on the underside channels dirt, leaves, and sediment directly into the collection bag for efficient debris removal. Crafted from lightweight yet resilient...

Polaris Cleaner Feed Hose Float Replacement by CMP | D10 | 25563-400-000

Keep your Polaris cleaner's feed hose riding high with the CMP Feed Hose Float (25563-400-000). Sold in a convenient four-pack, these white floats attach to the feed hose of Polaris 180, 280, and 380 pool cleaners to maintain proper buoyancy above the water's surface. By keeping the hose elevated, they prevent kinking, tangling, and drag that can hinder your cleaner's movement and reduce cleaning coverage....

Polaris Cleaner Feed Hose Nut Replacement by CMP | D15 | 25563-115-000

Secure your Polaris cleaner's feed hose connection with the CMP Feed Hose Nut 25563-115-000. This precision-molded coupling nut fastens the feed hose to Polaris 180, 280, and 380 pool cleaners, creating a firm, drip-free joint that withstands the constant water pressure these cleaners generate. Made from chemical-resistant material that holds up in harsh pool water conditions, it is a small but critical part that keeps...

Polaris Cleaner Universal Wall Fitting Connector by Swimables — 9-100-9001 | SW-62-900

Connect your Polaris pressure-side cleaner to its dedicated wall line with total confidence using the Swimables SW-62-900 Universal Wall Fitting Connector. This adapter bridges the gap between your cleaner hose and the pressure port in the pool wall, forming a snug, drip-free joint that sustains full water pressure to the cleaner head. Molded from heavy-duty, chemical-proof polymer, it resists cracking and discoloration even after years...

Polaris Complete Sweep Hose for 3900 & TR35P Cleaners | 39-500

Revitalize your Polaris cleaner's debris-loosening capability with the Complete Sweep Hose assembly 39-500. Tailored for the Polaris 3900 Sport and TR35P pressure-side pool cleaners, this full kit ships with the sweep hose, TailSweep Pro with integrated scrubber, wear ring, and hose clamp — everything needed for an immediate installation. Mounted at the cleaner's rear, the sweep hose propels concentrated jets of pressurized water that dislodge...

Polaris Cyclonic XL Leaf Catcher for Pressure Cleaners | XLCLC

Protect your pump and filter from premature wear with the Polaris Cyclonic XL Leaf Catcher, an advanced inline canister that intercepts leaves and debris before they can enter your filtration system. Engineered with high-velocity cyclonic action, this unit keeps captured material swirling inside the canister so it never settles and blocks water flow. The generous 5-liter horizontal canister accommodates far more debris than conventional catchers,...