2HP Replacement Impeller for Pentair SuperMax & SuperFlo Pumps | CMP 355086 | SW-21-304 | 25305-086-000

Give your 2 horsepower pool pump the flow boost it needs with the CMP Impeller 25305-086-000. Tailored for Pentair SuperFlo and Sta-Rite SuperMax pump platforms, this replacement impeller restores full water-moving capability so your pool stays clean and properly circulated. To ensure a trouble-free installation, it is always a good practice to check your pump's owner manual or have a licensed pool technician confirm that...

2HP Wet End Volute Pot Kit for Pentair WhisperFlo Pumps | PC&G 357149 PCG075455

Restore your 2HP Pentair WhisperFlo pump to factory-fresh condition with the PC&G Wet End Volute Pot Kit PCG075455. This all-in-one rebuild package supplies every wet-end component you need, from the volute housing and diffuser to the strainer basket, seal plate, O-rings, and locking rings, all manufactured to exacting tolerances from premium-grade materials. Rather than sourcing individual parts, this kit delivers a complete overhaul solution that...

3" Gray Dover Deck Drain by Swimables | SW-95-990

Keep your pool deck dry and safe with the Swimables Deck Drain Dover in Gray 3" SW-95-990. This purpose-built drainage system swiftly moves water away from patios, pool surrounds, and outdoor walkways, preventing puddles from forming and reducing the chance of surface deterioration over time. The understated gray finish pairs naturally with most deck materials and color schemes, delivering a clean and unified look. Engineered...

3" Tan Dover Deck Drain by Swimables | SW-95-991

Take control of water drainage around your pool area with the Swimables Deck Drain Dover in Tan 3" SW-95-991. Purpose-engineered to guide runoff away from deck and patio surfaces, this drain stops water from accumulating and causing long-term structural harm. Its warm tan tone integrates effortlessly into a broad spectrum of outdoor decor styles, adding both functionality and a refined visual touch. Manufactured from robust,...

3" White Round Pool Deck Drain Cover | Swimables SW-95-992

Give your pool deck a fresh, finished look while keeping drainage flowing freely with the Swimables SW-95-992 Round Deck Drain Cover. This 3-inch white plastic cover snaps over existing deck drains to shield them from foot traffic, loose gravel, and falling leaves. It is the ideal fix for cracked, discolored, or missing drain covers that can create trip hazards around the pool area. Made from...

3" White Schedule 40 PVC Pipe - 10 Ft Pool Plumbing Pipe

Power your largest plumbing installations with this 3-inch Schedule 40 PVC Pipe in white. Made in the USA, this pipe is built for main trunk lines in commercial pool systems, heavy-duty irrigation infrastructure, and industrial water distribution where maximum flow volume is non-negotiable. Its robust PVC walls deliver outstanding resistance to chemical degradation and sustained operating pressure, while the generous 3-inch bore paired with a...

3" x 4" Coarse Tile Scrubber Replacement Pad by Purity Pool | RPC

Restore your pool tiles to their original luster with the Purity Swimming Pool Tile Coarse Scrubber Pad RPC. Measuring 3" x 4", this replacement pad is purpose-built for aggressive cleaning tasks, tackling persistent scale, mineral deposits, and stubborn hard water staining. Its unique double-bonded construction fuses two pads into one extra-thick unit for superior scrubbing endurance. Swapping out worn pads is fast and hassle-free thanks...

3" x 4" Fine Tile Scrubber Replacement Pad by Purity Pool | RPF

Restore your pool tiles to a spotless finish with the Purity Swimming Pool Fine Tile Scrubber Pad RPF, a 3" x 4" replacement pad engineered for gentle yet effective surface cleaning. Two layers of thick scouring material are bonded together to deliver controlled pressure that lifts grime, mineral deposits, and discoloration without harming the tile beneath. Swapping pads is simple thanks to a bolt-and-wing-nut attachment...

3/4" Galvanized 45-Degree Elbow Fitting | IG4F

This Galvanized 45 Degree Elbow Fitting in 3/4-inch diameter facilitates smooth directional transitions in gas and water piping runs. Forged from heavy-duty galvanized steel, the fitting delivers superior protection against rust and corrosion, ensuring years of dependable service in demanding environments. The 45-degree bend angle enables gradual pipe routing changes that reduce turbulence and pressure drop, making it well suited for residential plumbing, commercial infrastructure,...

3/4" Galvanized 90-Degree Elbow Fitting | IG9F

When your piping layout calls for a sharp directional shift, the 3/4-inch Galvanized 90 Degree Elbow Fitting provides a rock-solid right-angle connection for water, gas, and general-purpose plumbing runs. Forged from galvanized steel, this fitting shrugs off corrosion and mechanical wear while its finely cut threads produce a watertight seal on every installation. It is an indispensable component for residential repairs, commercial build-outs, and industrial...

3/4" Galvanized Coupling Fitting | IGCF

Connect threaded pipe sections with confidence using this 3/4-inch Galvanized Coupling Fitting, engineered to deliver a strong, enduring joint in plumbing and gas line installations. Its galvanized steel body resists oxidation and surface wear, keeping the connection intact through years of continuous service. Finely threaded ends lock together firmly for a leak-proof seal, making this coupling a versatile choice for water supply lines, gas distribution...

3/4" Galvanized Iron Threaded Cap Fitting | SKU IGCAPF

Protect and terminate your galvanized pipe runs with this 3/4-inch Threaded Galvanized Iron Cap. Built from sturdy galvanized iron, it resists rust and degradation, providing long-lasting service in water supply, gas distribution, and other fluid transport systems. Whether installed in a home, a commercial facility, or an industrial plant, the finely machined threads deliver a secure, leak-proof closure that shields the open pipe end from...

3/4" Galvanized Malleable Pipe Union - MN-ZMGUN04

Keep your plumbing and gas lines accessible and serviceable with this 3/4-inch Galvanized Malleable Union. Produced from galvanized malleable iron, it combines superior tensile strength with a corrosion-resistant zinc finish to perform reliably in residential and commercial environments. The union configuration allows you to attach or detach threaded pipes without rotating the connected sections, which proves invaluable during routine servicing and unexpected repairs. Carefully machined...

3/4" Galvanized Tee Fitting for Gas Lines - 491256

Split your gas line with precision using this 3/4-inch Galvanized Tee Gas Fitting. Forged from heavy-duty galvanized steel, it stands up to the corrosive effects of moisture and gas by-products, delivering years of dependable service. The T-shaped design creates a three-way junction, letting you branch a single gas line into two directions. Carefully formed threads on all three ports produce tight, leak-proof seals that maintain...

3/4" Gray Schedule 80 PVC Electrical Conduit Pipe - 10 Ft Length

Route and protect your electrical wiring reliably with this 3/4-inch Schedule 80 PVC Electrical Pipe in gray. Built in the USA to exacting standards, this conduit combines a reinforced heavy-wall design with the natural advantages of PVC, including resistance to corrosive chemicals, moisture infiltration, and UV-induced degradation. The 3/4-inch size strikes a practical balance between conductor capacity and compact routing, fitting into wall cavities and...

3/4" IPS Poly Fusion Tee Fitting | IPS-ST34

Engineered for polyethylene gas distribution networks, this 3/4-inch IPS (Iron Pipe Size) Poly Fusion Tee forms robust branch connections through the heat-fusion welding process. The technique produces a monolithic, leak-resistant joint that excels in natural gas and propane service. Crafted from top-grade polyethylene, the fitting delivers outstanding protection against corrosion, stress cracking, and mechanical damage, making it well-suited for subterranean and high-pressure piping runs. Its...

3/4" IPS Poly Meter Riser - Polyethylene Gas Fitting (IPS-PR34)

This 0.75-inch IPS (Iron Pipe Size) Poly Meter Riser connects buried polyethylene gas lines to above-ground meters and regulators with confidence. High-density polyethylene (HDPE) construction delivers strong resistance to corrosion, environmental conditions, and impact loads, ensuring sustained operational reliability. The precision-formed profile creates a tight, leak-resistant transition point well-suited for natural gas and propane applications. Easy to manage thanks to its low weight, the riser...

3/4" IPS Poly Socket Fusion Coupling - Polyethylene Pipe Connector (IPS-SCP34)

Built for dependable polyethylene gas pipe connections, this 3/4-inch IPS (Iron Pipe Size) Poly Socket Fusion Coupling delivers a permanent, airtight bond through the proven socket fusion process. Whether your project involves natural gas or propane distribution, this coupling stands up to corrosion, ground stress, and physical impact for years of trouble-free service in buried or pressurized piping systems. Its compact, lightweight form factor makes...

3/4" Poly Socket Fusion 90-Degree Elbow - IPS Polyethylene Fitting (IPS-S934)

Crafted for polyethylene gas piping systems, this Yellow Poly Socket Fusion 90 Degree Elbow Fitting in a 3/4-inch IPS (Iron Pipe Size) size facilitates secure right-angle connections. The socket fusion bonding approach yields a uniform, gas-tight seal optimized for natural gas and propane pipelines. Constructed from tough polyethylene, the fitting offers solid protection against corrosion, mechanical stress, and environmental factors, performing reliably in underground and...

3/4" White Schedule 40 PVC Pipe - 10 Ft Pool Plumbing Pipe

Get reliable performance for everyday plumbing tasks with this 3/4-inch Schedule 40 PVC Pipe in white. Produced in the USA, it brings together chemical resistance, pressure capability, and a compact profile that fits perfectly into pool equipment connections, spa supply lines, residential water distribution, and irrigation laterals. The interior surface is engineered smooth to keep friction drag low and water flowing freely, even across extended...