3/4" x 1.5" Galvanized Steel Pipe Nipple - 3/4X1.5" GALV

Bridge short gaps in your piping layout with this Galvanized Steel Nipple from Poolst. Measuring 3/4" x 1.5", this compact threaded connector links pipes and fittings in water supply lines, gas distribution networks, and compressed air systems. Its galvanized finish acts as a durable barrier against rust and mineral buildup, keeping your connections sound for years. Key Benefits Compact Pipe Connector: At 3/4" x 1.5",...

3/4" x 1/2" Galvanized Rigid Reducer Bushing - MN-ZMGBU0403

Step down your conduit connections with confidence using the Galvanized Rigid Reducer Bushing from Poolst. Engineered in a 3/4" x 1/2" configuration, this fitting delivers a precise transition between differently sized threaded rigid conduit runs, helping you maintain a clean and code-compliant electrical installation. Key Benefits Seamless Size Reduction: This 3/4" x 1/2" reducer bushing provides an accurate step-down between conduit sizes, allowing you to...

3/4" x 10" Galvanized Steel Pipe Nipple - MN-ZNG0410

Span longer distances between fittings with the Galvanized Steel Nipple from Poolst. Sized at 3/4" x 10", this extended-length connector is built for plumbing, gas, and air distribution systems where a greater reach is needed. A hot-dip galvanized coating provides lasting protection against corrosive conditions, while precision-cut threads anchor each connection securely. Key Benefits Extended Reach Connector: The 10" length gives you the extra span...

3/4" x 11" Galvanized Steel Pipe Nipple

Tackle medium-to-long pipe runs efficiently with the Galvanized Steel Nipple from Poolst. Measuring 3/4" x 11", this fitting bridges the distance between threaded connections in plumbing, gas, and air piping systems. Its galvanized steel construction resists corrosion and withstands the rigors of both indoor and outdoor installations. Key Benefits Ideal Intermediate Length: The 11" span fills the gap between standard short nipples and longer pipe...

3/4" x 12" Galvanized Steel Pipe Nipple

Connect pipe fittings across a full foot of distance with this Galvanized Steel Nipple from Poolst. At 3/4" x 12", it serves as a workhorse connector in plumbing, gas distribution, and pneumatic piping systems. The galvanized steel body stands up to moisture, temperature swings, and chemical exposure, delivering dependable performance throughout the life of your installation. Key Benefits One-Foot Span: The 12" length lets you...

3/4" x 18" Galvanized Steel Pipe Nipple | SKU IGNF18

When your piping layout calls for extra length, this Galvanized Steel Nipple from Poolst delivers. Sized at 3/4" x 18", it provides an extended threaded connection between fittings in water, gas, and air systems. The full-coverage galvanized coating guards the steel against corrosion, ensuring that even lengthy exposed runs remain structurally sound over time. Key Benefits Extended 18" Body: This generous length reduces the number...

3/4" x 2" Galvanized Steel Pipe Nipple | 3/4X2" GALV

Make quick, secure connections in tight quarters with this Galvanized Steel Nipple from Poolst. Measuring 3/4" x 2", it works perfectly for close-coupled joints between valves, fittings, and pipe segments in water supply, gas, and air systems. The galvanized steel construction ensures lasting resistance to rust and scaling. Key Benefits Short-Span Connector: The 2" length is purpose-built for close-coupled assemblies where space between fittings is...

3/4" x 2.5" Galvanized Steel Pipe Nipple | 3/4X2.5" GALV

Add just the right amount of reach between threaded connections with this Galvanized Steel Nipple from Poolst. The 3/4" x 2.5" sizing gives you slightly more room than a close nipple while still keeping joints compact. Built from galvanized steel, it withstands corrosive conditions in water, gas, and air piping networks. Key Benefits Precise 2.5" Length: This mid-short size offers the additional clearance needed when...

3/4" x 24" Galvanized Steel Pipe Nipple | Threaded Fitting

Cover significant distances in your pipe system with the Galvanized Steel Nipple from Poolst. At 3/4" x 24", this two-foot connector minimizes the need for multiple joints along extended runs in plumbing, gas, and air lines. Its galvanized steel body delivers enduring corrosion resistance for installations that demand long-term reliability. Key Benefits Two-Foot Reach: The 24" length dramatically reduces coupling count on long runs, saving...

3/4" x 3" Galvanized Steel Pipe Nipple | 3/4X3" GALV

Get the spacing you need between fittings with this Galvanized Steel Nipple from Poolst. At 3/4" x 3", it provides a practical medium-short connection for plumbing, gas, and compressed-air piping. The galvanized steel construction guards against corrosion, keeping your joints intact and your system flowing smoothly. Key Benefits Practical 3" Connection: This length strikes a useful balance for moderate-clearance joints, providing enough separation between fittings...

3/4" x 3.5" Galvanized Steel Pipe Nipple | 3/4X3.5" GALV

Achieve just the right offset between pipe fittings with this Galvanized Steel Nipple from Poolst. The 3/4" x 3.5" dimensions provide a half-inch more reach than a standard 3" nipple, giving you extra flexibility in plumbing, gas, and air system layouts. Galvanized steel construction ensures the fitting endures through years of continuous service. Key Benefits Fine-Tuned 3.5" Length: When a 3" nipple falls just short,...

3/4" x 30" Galvanized Steel Pipe Nipple | Threaded Fitting

Run your piping across extended spans with the Galvanized Steel Nipple from Poolst. At 3/4" x 30", this fitting provides two and a half feet of threaded pipe in a single piece, making it ideal for long-reach connections in plumbing, gas, and air distribution systems. Its galvanized finish ensures that every inch resists corrosion for the long haul. Key Benefits Generous 30" Length: This extended...

3/4" x 36" Galvanized Steel Pipe Nipple | Threaded Fitting

Handle the longest pipe runs with the Galvanized Steel Nipple from Poolst. At 3/4" x 36", this three-foot fitting provides maximum reach in a single threaded piece, perfect for plumbing, gas distribution, and pneumatic piping where lengthy connections are essential. Heavy galvanization keeps the full length protected against rust and environmental wear. Key Benefits Full Three-Foot Span: The 36" body lets you traverse long distances...

3/4" x 4" Galvanized Steel Pipe Nipple | 201-050130

Complete your threaded pipe assemblies with the Galvanized Steel Nipple from Poolst. This 3/4" x 4" fitting offers a versatile mid-range length for joining components in water supply, gas distribution, and compressed-air networks. Manufactured from galvanized steel, it delivers a tough, rust-resistant connection that performs reliably in any setting. Key Benefits Versatile 4" Length: The four-inch body provides enough separation between fittings for comfortable tool...

3/4" x 4.5" Galvanized Steel Pipe Nipple | MN-ZNG04512

Fine-tune your pipe spacing with the Galvanized Steel Nipple from Poolst. Sized at 3/4" x 4.5", this fitting occupies the sweet spot between standard 4" and 5" nipples, giving installers precise control over the distance between threaded connections in water, gas, and air piping systems. Its galvanized steel composition ensures outstanding resistance to corrosive forces. Key Benefits Precise 4.5" Dimension: This in-between length is invaluable...

3/4" x 48" Galvanized Steel Pipe Nipple | Threaded Fitting

Built to bridge pipe runs in plumbing, gas, and general piping networks, this 3/4" x 48" Galvanized Steel Nipple delivers dependable, long-term service. A protective zinc coating shields the steel from rust and environmental degradation, while precision-cut threads on both ends create tight, drip-free joints. Whether you are working on a home renovation, a commercial buildout, or an industrial installation, this fitting connects water, gas,...

3/4" x 5" Galvanized Steel Pipe Nipple | MN-ZNG045

When you need a short, sturdy connector for plumbing, gas, or general piping work, this 3/4" x 5" Galvanized Steel Nipple fits the bill. Manufactured from steel with a zinc-based galvanized finish, it stands up to moisture, chemicals, and everyday wear. Threads machined into both ends lock firmly into fittings and valves, producing a watertight junction. From household plumbing repairs to commercial gas hookups and...

3/4" x 5.5" Galvanized Steel Pipe Nipple | 201-050190

Engineered for dependable pipe-to-pipe connections, this 3/4" x 5.5" Galvanized Steel Nipple is a go-to fitting for plumbing, gas, and air-handling systems. The steel body is hot-dip galvanized, forming a robust barrier against corrosion that holds up in both indoor and outdoor environments. Dual-end threading grips mating components securely, producing joints that resist leaks over time. This versatile fitting serves residential renovations, commercial construction, and...

3/4" x 6" Galvanized Steel Pipe Nipple | MN-ZNG046

This 3/4" x 6" Galvanized Steel Nipple provides a solid, corrosion-resistant link between pipes and fittings in plumbing, gas, and air-distribution networks. The steel substrate is coated with zinc through a galvanizing process, creating a durable shield that withstands harsh conditions. Male threads on each end form reliable, leak-tight seals when paired with compatible valves, unions, or couplings. Suitable for residential, commercial, and industrial jobs,...

3/4" x 7" Galvanized Steel Pipe Nipple | MN-ZNG047

Reach the next connection point with confidence using this 3/4" x 7" Galvanized Steel Nipple. Crafted from steel and finished with a zinc galvanized coating, it resists rust and environmental wear for a long operational life. Threaded ends on both sides screw tightly into standard pipe fittings, valves, and unions to form a sealed joint that prevents drips and pressure drops. This fitting is purpose-built...