Jandy O-Ring Kit for DEV and DEL Filters | R0358000

Description The Jandy O-Ring Kit for DEV and DEL Filters, R0358000, is an essential maintenance accessory designed to keep your pool filtration system operating at peak performance. This kit includes high-quality O-rings that ensure a secure, leak-free seal for your DEV and DEL filter components. Easy to install, these O-rings help maintain the integrity of your filtration system, preventing water leakage and ensuring clean, clear...

Jandy Power Distribution Board For LXi and JXI Heaters | R0458100

Description OEM Jandy Power Distribution Board R0458100 is a key internal control module designed for use in Jandy LXi and JXi pool and spa heaters. This component is responsible for regulating the internal power supply, distributing electricity to the various critical systems inside the heater. It ensures each subsystem receives the correct voltage, supporting safe startup, proper diagnostics, and stable day-to-day operation. As an OEM...

Jandy Power Interface Wiring Harness Kit for JxiQ Heaters | R0985500

Description The Jandy Wiring Harness Kit for JXi Heaters (R0985500) is an OEM Power Interface (PI) harness engineered for JXiQ heater models 200, 260, and 400Ñincluding ASME-compliant versionsÑto ensure reliable power connectivity across the control system. Designed for seamless integration, this factory-authorized wiring assembly maintains the integrity of internal electrical pathways, supporting consistent performance and simplifying replacement during service or refurbishment. Ideal for pool technicians...

Jandy Pressure Gauge Adapter For CS Filters | R0557100

Description The OEM Jandy Pressure Gauge Adapter for CS Filters, part number R0557100, is a vital component for maintaining the accuracy and efficiency of your pool's filtration system. Designed for Jandy CS Series cartridge filters, including models CS100, CS150, CS200, and CS250, this adapter includes an O-ring seal to ensure a secure and leak-free connection. Constructed from durable materials, it provides long-lasting performance and is...

Jandy Pressure Switch for JxiQ Heaters | R0013203

Description The Jandy Pressure Switch for JXiQ Heaters (R0013203) is a high-quality OEM component engineered for JXiQ series models (200, 260, and 400), including ASME-compliant units. This precision switch monitors water flow or pressure within the heaterÕs plumbing system to ensure safe operationÑpermitting ignition only when proper circulation is confirmed and triggering system shutdowns if unsafe conditions are detected. Crafted to exact Jandy specifications, the...

Jandy R0807203 Impeller Kit | Stealth | PlusHP | 0.75 to 1HP

Description OEM Jandy Impeller Kit R0807203 is built for compatibility with 0.75 HP to 1.0 HP models in the Jandy Stealth (SHPF/SHPM) and PlusHP (PHPF/PHPM) pump series. The kit includes a precision impeller, a screw, and a backplate O-ringÑeach playing a vital role in maintaining proper pump performance. Designed to deliver efficient water movement and minimize strain on your system, it supports continuous pool circulation....

Jandy Screw Kit For Diverter and Check Valves | #14 x 3/4" | 8 Pack | R0547600

Description The Jandy R0547600 Screw Kit is designed for securing diverter and check valve covers in pool and spa plumbing systems. This kit includes eight #14 x 3/4-inch screws compatible with various Jandy valve models, ensuring a tight seal to prevent leaks and maintain optimal water flow. Regular maintenance and replacement of these screws are recommended to uphold the integrity and efficiency of your pool...

Jandy Screws For DEV and DEL DE Filter Handle | Hardware Kit | 4 Pack | R0359900

Description The Jandy DEV/DEL Handle Hardware Kit 4 Pack Screw is a convenient and essential accessory designed to ensure the proper functioning of your pool filter. Compatible with Jandy DEV and DEL series filters, this kit includes four screws that are crafted from high-quality materials for durability and longevity. These screws are specifically designed to securely attach the handle to the filter, providing a reliable...

Jandy SPEEDSET Pump Controller

Jandy Tank Top O-Ring For CS Filters | R0462700

Description The OEM Jandy Tank Top O-Ring for CS Filters, part number R0462700, is a high-quality replacement part designed to ensure a tight seal for the tank tops of Jandy CS Series cartridge pool and spa filters, including models CS100, CS150, CS200, and CS250. This O-ring, which measures 10.75 inches in diameter, helps prevent leaks and maintain the efficiency of your filtration system. It's constructed...

Jandy Temperature Sensor Kit For AquaLink RS and VersaTemp Heat Pump | 15' | 7790

Description OEM Jandy Temperature Sensor Kit 7790 is a durable sensing unit developed for use with VersaTemp heat pumps and AquaLink RS controls. It monitors air, water, or solar temperatures and includes a 15-foot cord for convenient placement. Built to work specifically with Jandy AquaLink RS systems, it ensures consistent temperature tracking. This kit is easy to install and critical for accurate readings to optimize...

Jandy Temperature Sensor Kit For JxiQ Heaters | R0456502

Description The Jandy Temperature Sensor Kit for JXiQ Heaters (R0456502) is an OEM inlet thermistor assembly designed specifically for JXiQ/JXi models (200, 260, and 400). Engineered to detect incoming water temperature with precision, this thermistor ensures accurate regulation of heating cycles and efficient temperature control. Complete with temperature probe, protective sleeve, and gasket, the R0456502 is a straightforward, direct-fit replacement that integrates seamlessly with the...

Jandy Tie Rod Knob For DEL and DEV Pool Filter | R0359400

Description An essential part of your pool filter system, the Jandy Filter Tie Rod Knob holds the tie rods firmly in place. This knob guarantees a tight and secure fit, maintains the alignment of the filter grids for effective filtering, and is compatible with Jandy DEV and DEL series filters. Tie rods may be easily tightened or loosened during filter maintenance thanks to the knob's...

Jandy Tie Rod With Knob And Lock Nuts For DEV48 and DEL48 Filters | R0554800

Description The Jandy DE Filter Tie Rod is a crucial component of your pool's D.E. filtration system, responsible for securing the filter grids in place. This tie rod is designed for use with Jandy DEV and DEL series filters and ensures that the grids are properly aligned for efficient filtration. Made from durable materials, the Jandy DE Filter Tie Rod is built to withstand the...

Jandy Tie Rod With Knob and Lock Nuts For DEV60 and DEL60 Filters | R0359300

Description The Jandy DE Filter Tie Rod is a crucial component of your pool's D.E. filtration system, responsible for securing the filter grids in place. This tie rod is designed for use with Jandy DEV and DEL series filters and ensures that the grids are properly aligned for efficient filtration. Made from durable materials, the Jandy DE Filter Tie Rod is built to withstand the...

Jandy TruClear Salt Chlorinator | 35k Gallons | TRUCLEAR11K

Description Jandy TruClear Salt Chlorinator The Jandy TruClear Salt Chlorinator TRUCLEAR11K Êis engineered to provide effortless and dependable saltwater chlorination for residential swimming pools up to 35,000 gallons. Constructed from robust Jandy Never Lube valve material, it ensures exceptional durability and longevity. Its compact design facilitates seamless integration into various equipment pad configurations, making it suitable for both new constructions and retrofit installations. The transparent...

Jandy TruDose Chemical Controller | TRUDOSE

Description Jandy TruDose Chemical Controller The Jandy TruDose Chemical Controller is a smart and reliable solution for maintaining perfectly balanced pool water around the clock. Designed to monitor and manage pH and ORP levels in real-time, TruDose automatically doses the correct amount of muriatic acid and activates your Jandy AquaPure¨ salt chlorinator as needed Ñ ensuring clean, safe, and comfortable swimming conditions between service visits....

Jandy TruGuard Mineral Filter & Sanitizer

Jandy Union For FloPro Pumps | 2" x 2" | 2 Pack | R0327301

Description The OEM Jandy Union Kit for FloPro Pumps R0327301 is designed for use with Jandy FloPro and VS-FHP series inground pool pumps. This kit includes two tail pieces, two union nuts, and two O-rings, providing a secure connection between your pump and plumbing system. The tailpieces are sized at 2 inches by 2 inches, making them suitable for a variety of plumbing setups. This...

Jandy User Interface Kit for JxiQ Heaters | R0988800

Description The OEM Jandy User Interface Kit for JXiQ Heaters (R0988800) is an OEM control panel upgrade compatible with Jandy JXiQ and ASME-compliant models 200, 260, and 400. Designed to replace or enhance your heaterÕs display and control system, this kit restores intuitive, backlit push-button navigation and provides essential diagnostics at a glance. Built to JandyÕs high standards, the interface maintains seamless integration with existing...