CMP 25563-052-000 Back Up Valve for Polaris Cleaner - G52 Replacement Assembly

Keep your Polaris pressure-side pool cleaner moving freely with the CMP Back-Up Valve 25563-052-000. This essential replacement component is built to work with Polaris 180, 280, 380, and P39 models, providing automated directional changes that prevent the cleaner from becoming trapped in corners or tight areas. Operating on a timed cycle, the valve activates approximately every 3 minutes and stays open for roughly 30 seconds,...

Polaris Universal Wall Fitting Connector by CMP | 9-100-9001 | 25563-150-000

Simplify your Polaris pool cleaner hookup with this CMP-manufactured replacement for the Polaris Universal Wall Fitting (UWF) Connector Assembly. The kit arrives complete with a universal wall fitting adapter, a built-in pressure relief valve, and both sizes of restriction washers, giving you everything required for a full installation without separate trips to the supply house. Produced to CMP Pool Products' exacting standards, every component is...

Pool Cleaner Wheel Ball Bearings by CMP - C60 | 25563-250-000

Keep your Polaris pool cleaner rolling effortlessly with the CMP Wheel Ball Bearings 25563-250-000. These precision-engineered bearings are vital for the seamless movement and traction of Polaris cleaners, including the Atlas 180, 280, and Quattro P40/Sport models. By minimizing wheel friction and ensuring steady contact with pool surfaces, they allow your cleaner to navigate walls and floors with consistent efficiency. Manufactured by Custom Molded Products...

Polaris Pool Cleaner Sweep Hose Scrubber 5-Pack | Black | CMP 9-100-3105 | 25563-300-500

Give your Polaris pressure-side cleaner renewed scrubbing power with the CMP Sweep Hose Scrubber 25563-300-500. This 5-pack replacement tail scrubber fits directly onto the sweep hose tip on Polaris Vac-Sweep 180, 280, 360, 380, 480 PRO, TR35P, TR36P, P39, and 3900 Sport cleaners. Each scrubber agitates and dislodges stubborn dirt, algae, and debris from pool walls, corners, and steps while simultaneously shielding the hose end...

Polaris Vac-Sweep Sweep Hose Attachment Clamp | CMP 25563-110-000

Maintain a rock-solid connection between your sweep hose and Polaris pool cleaner with the CMP Sweep Hose Attach Clamp 25563-110-000. Precision-crafted for Polaris Vac-Sweep models 180, 280, 360, and 380, this genuine CMP component locks the sweep hose firmly in place during operation so your cleaner can move freely without losing contact. Built from resilient materials that stand up to continuous underwater use, this clamp...

Polaris 180 & 280 Vac-Sweep Wheel Screw by CMP - C55 | 25563-370-000

Secure the wheels on your Polaris pool cleaner with the CMP Wheel Screw 25563-370-000, a dependable replacement fastener built for the Polaris Vac-Sweep 180 and 280 models. This white plastic screw is purpose-designed to lock each wheel assembly firmly to the cleaner chassis, preventing wobble and ensuring uninterrupted surface contact during operation. Manufactured from robust materials by Custom Molded Products (CMP), it slides into the...

Polaris 180 & 280 Rear Wheel Large Axle by CMP | C65 | 25563-170-000

Restore full mobility to your automatic pool cleaner with the CMP Rear Wheel Large Axle 25563-170-000, purpose-built for Polaris Vac-Sweep 180 and 280 models. This axle serves as the structural backbone of the rear wheel assembly, supporting the wheels, tires, ball bearings, and wheel washers that allow the cleaner to traverse pool surfaces and efficiently collect dirt and debris. Constructed for lasting durability, it bolts...

Replacement Small Wheel for Polaris Vac-Sweep 180 & 280 | CMP C16 | 25563-460-000

Get your Polaris Vac-Sweep 180 or 280 cleaner tracking properly again with the CMP Small Wheel 25563-460-000. This replacement idler wheel supplies the tension needed to engage the rear drive wheel, allowing the cleaner to move steadily across pool surfaces for thorough coverage. Molded from tough, wear-resistant material, it stands up to extended underwater operation while remaining light enough for straightforward, quick installation whenever maintenance...

Turbine Ball Bearing by CMP | Fits Polaris Vac-Sweep 180 & 280 | C80 | 25563-260-000

Restore smooth, responsive movement to your Polaris pool cleaner with the CMP Turbine Ball Bearing 25563-260-000, a premium replacement component engineered for the Polaris Vac-Sweep 180 and 280. This precision bearing sits on the turbine drive shaft, enabling frictionless rotation that powers the cleaner's propulsion across your pool floor. Manufactured to meet or surpass original equipment standards, it delivers the consistent rotational accuracy your cleaner...

Polaris Vac-Sweep 180 & 280 Drive Shaft Assembly Replacement | CMP C86 | 25563-086-000

Restore your Polaris pool cleaner's sweeping power with the CMP Drive Shaft Assembly 25563-086-000, an essential component for Polaris Vac-Sweep 180 and 280 models. This assembly drives the turbine rotation that propels the cleaner across your pool floor, walls, and waterline. Engineered from wear-resistant materials, it delivers dependable performance that keeps your automatic cleaner running at peak efficiency throughout the swimming season. Key Benefits Vital...

Universal Wall Fitting by CMP | Fits Polaris Pool Cleaners | 6-500-00 | 25563-160-000

The CMP Universal Wall Fitting 25563-160-000 provides the essential plumbing bridge between your Polaris automatic pool cleaner and the pool's dedicated return line. Engineered to work with Polaris models 180, 280, 360, and 380, this fitting anchors into the pool wall and accepts the cleaner's feed hose, establishing a sealed, pressure-stable connection that powers your cleaner's movement and suction. Manufactured from tough, pool-grade materials that...

Universal Wall Fitting Quick Disconnect by CMP | Fits Polaris Cleaners | D29 | 25563-029-000

Simplify cleaner hookup and removal with the CMP Universal Wall Fitting Quick Disconnect 25563-029-000, designed for Polaris Vac-Sweep 180, 280, P39, and 380 automatic pool cleaners. This component creates a tool-free snap connection between your Polaris cleaner hose and the pool's return line wall fitting, so attaching or detaching the cleaner takes just seconds. Beyond convenience, the quick disconnect maintains full water pressure and uninterrupted...

Polaris Cleaner Feed Hose Nut Replacement by CMP | D15 | 25563-115-000

Secure your Polaris cleaner's feed hose connection with the CMP Feed Hose Nut 25563-115-000. This precision-molded coupling nut fastens the feed hose to Polaris 180, 280, and 380 pool cleaners, creating a firm, drip-free joint that withstands the constant water pressure these cleaners generate. Made from chemical-resistant material that holds up in harsh pool water conditions, it is a small but critical part that keeps...

Replacement In-Line Filter Assembly for Polaris Pool Cleaners | CMP 48-080 | 25563-080-000

Protect the inner workings of your Polaris pressure-side pool cleaner with the CMP In-Line Filter Assembly (25563-080-000). This complete assembly slots into the feed line of your Polaris cleaner to intercept sand, grit, and other particles before they can reach delicate internal mechanisms. Built from tough, pool-grade materials, it delivers season after season of dependable debris filtration. Compatible with Polaris models 180, 280, 380, 3900...

Replacement In-Line Filter Screen for Polaris Pool Cleaners | CMP 48-222 | 25563-080-040

Keep your Polaris pool cleaner running at full efficiency with the CMP In-Line Filter Screen (25563-080-040). This precision-made replacement screen fits inside the in-line filter housing to catch leaves, sediment, and fine particles before they work their way into the cleaner's internal mechanisms. Compatible with Polaris 180, 280, 380, TR35P, P39, F4TR, F4000D, and 3900 Sport models, this screen is fabricated from corrosion-resistant material that...

10' Polaris Cleaner Feed Hose Replacement by CMP | D45 | 25563-040-100

Get your Polaris pressure-side cleaner back to full performance with the CMP Feed Hose 25563-040-100, a 10-foot replacement hose built for Polaris models 180, 280, 380, P39, and 3900. This hose channels pressurized water from the wall fitting to the cleaner head, powering its movement and debris collection across your pool. Manufactured from flexible yet tough material, it resists kinking and degradation from constant water...

D20 Ball Bearing Hose Swivel Replacement for Polaris Pool Cleaners | CMP 25563-240-000

Eliminate frustrating hose tangles and restore full range of motion to your Polaris pool cleaner with the CMP Ball Bearing Hose Swivel 25563-240-000. Purpose-built for Polaris 180, 280, 380, and P39 models, this swivel joint allows the feed hose to rotate freely as the cleaner changes direction, preventing kinks and coiling that can restrict water flow and limit coverage. The internal ball bearing mechanism provides...

CMP 25563-052-054 Back Up Valve Case Kit for Polaris Cleaners - G54 Replacement

Replace a cracked or deteriorating back-up valve housing on your Polaris pool cleaner with the CMP Back-Up Valve Case Kit 25563-052-054. This aftermarket outer shell is precision-molded to match the G52 back-up valve used in the Polaris Vac-Sweep 180, 280, and 380 series. Note that this kit covers the external casing only and does not include internal valve mechanisms. Constructed from tough, pool-grade materials, the...

CMP 25563-050-024 Back Up Valve Collar for Polaris Cleaners - G57 Replacement Part

Keep the back-up valve on your Polaris pool cleaner firmly anchored with the CMP Back-Up Valve Collar 25563-050-024. This replacement collar is crafted to fit the Polaris Vac-Sweep 180, 280, and 380 models, serving the critical role of locking the back-up valve assembly in position so it can periodically reverse the cleaner's travel path and prevent it from stalling in corners or along walls. Manufactured...

CMP 25563-270-800 Ball Bearings for Polaris Cleaners - 9-100-1108 Replacement | 8 Pack

Refresh the wheel assemblies on your Polaris pool cleaner with the CMP Ball Bearing 8-Pack, part number 25563-270-800. Specifically sized for the Polaris 360, 380, TR35P, TR36P, P39, and 3900 Sport, these replacement bearings restore friction-free wheel rotation that is critical to proper cleaner movement and navigation. Crafted from hardwearing materials that resist the corrosive effects of pool chemicals, this complete set of eight bearings...