Pentair Push Pull Slide Valve Piston Assembly by CMP | 51013811 | 25831-130-100

Return your Pentair slide valve to factory-fresh performance with the CMP Piston Assembly 25831-130-100. Manufactured by Custom Molded Products (CMP) specifically for the Pentair push-pull slide valve model 263034, this kit delivers the piston, shaft, and handle as a complete, ready-to-install package. Worn seals, a sticky handle, or sluggish valve response are all signs it is time for a rebuild, and this assembly makes the...

Key Cover Handle Assembly for Hayward Multiport Valves | CMP Replaces SPX0710XBA17 | 27513-154-100

Restore complete control over your pool's multiport valve with the CMP Key Cover Handle Assembly 27513-154-100. Engineered as a precision aftermarket substitute for the Hayward SPX0710XBA17, this assembly delivers seamless compatibility with Hayward 1.5-inch multiport valve models SP0710, SP0710X, SP0711, and SP0712. It allows effortless switching between filter, backwash, rinse, and waste positions while offering outstanding build quality at a fraction of the original equipment...

Top Manifold by CMP | Fits Hayward SwimClear Cartridge Filter | CX3030C | 25357-760-000

Restore full filtration power to your Hayward SwimClear system with the CMP Top Manifold 25357-760-000, a precise drop-in substitute for the Hayward CX3030C. Compatible with Hayward SwimClear Cartridge Filter models C2030, C3030, and C4030, this manifold distributes water uniformly across all filter cartridges to maximize contaminant capture and water clarity. Featuring a reinforced H-style top architecture, it delivers the structural strength needed for sustained, trouble-free...

Hayward Multiport Valve Key Cover Replacement by CMP | SP0710X62 | 27514-154-100

Bring your Hayward multiport valve back to full working order with the CMP Replacement Multiport Valve Key Cover 27514-154-100. Manufactured as a compatible substitute for the Hayward SP0710X62, this top-half key assembly restores reliable switching between filter, backwash, rinse, and waste positions, giving you complete control over your pool's filtration routing once again. Key Benefits Hayward SP0710X62 Compatible: Precision-manufactured to align with the original multiport...

CMP Compatible Replacement Hayward Filter Pressure Gauge with Dial | ECX2712B1 | 25501-100-900

Monitor your pool's filtration pressure with confidence using the CMP Pressure Gauge with Dial, part number 25501-100-900. Engineered as a premium aftermarket component for a broad lineup of Hayward filter systems, this gauge fits Hayward Pro-Grid Vertical D.E. and Grid Series, SwimClear, Star-Clear Plus, and HCF Series Cartridge Filter units. Equipped with an integrated dial for clear visual readout, it is manufactured for resilience and...

CMP 25501-000-900 Back Mount Pressure Gauge - Replacement for Hayward Star Clear Filters | ECX27091

Stay on top of your filtration system's health with the CMP Back Mount Pressure Gauge 25501-000-900, built specifically to pair with Hayward Star Clear filters. Reading from 0-60 PSI, this solidly constructed gauge delivers clear, accurate pressure data so you always know exactly when your filter needs attention. Its back-mount configuration and easy-read dial face make installation and daily monitoring straightforward, giving you the information...

Hayward SwimClear & SuperStar Filter Bottom Manifold Replacement | CMP CX3000C | 25357-750-000

Support consistent, high-performance filtration in your Hayward SwimClear or SuperStar Clear system with the CMP Bottom Manifold 25357-750-000. Positioned at the base of the filter tank, this manifold evenly distributes incoming water across all four cartridge elements, promoting balanced flow and thorough debris capture. Engineered from sturdy, chemical-resistant material, it holds up against the constant water pressure and sanitizer exposure found inside active filter tanks....

Pentair Filter Pressure Gauge Replacement by CMP | 190058 | 25501-000-800

Keep a close watch on your filter's internal pressure with the CMP Pressure Gauge 25501-000-800, a precision bottom-mount gauge calibrated from 0-60 PSI. Serving as a drop-in replacement for Pentair part number 190058, it delivers guaranteed compatibility with Pentair filtration systems right out of the box. Crafted from rugged, long-wearing materials, this gauge provides dependable readings that help you stay on top of filter maintenance...

Pentair Push Pull Slide Valve Piston Assembly by CMP | 273241Z | 25831-120-100

Bring your Pentair push-pull slide valve back to peak condition with the CMP Piston Assembly 25831-120-100. Custom Molded Products (CMP) designed this assembly as a direct-fit replacement for Pentair slide valve model 261165, packaging the piston, shaft, and handle into a single, ready-to-install kit. Whether the original components are worn, cracked, or sticking, this assembly restores fluid valve travel so you can switch confidently between...

Hayward SP0410X Push Pull Slide Valve Piston Assembly by CMP | SPX0410BA | 25831-000-100

Get your Hayward slide valve operating like new again with the CMP Piston Assembly 25831-000-100, a premium aftermarket replacement engineered for the Hayward SP0410X push-pull slide valve. Widely used alongside Hayward Micro Clear and Pro Grid D.E. filters, this all-in-one assembly ships with the piston, rod, and handle so you can perform a complete rebuild in a single step. Its robust construction guarantees silky-smooth valve...

Air Relief Valve with Pressure Gauge for Pentair Triton Filters by CMP | 273564 | 25357-273-564

Monitor filter pressure and purge trapped air with confidence using the CMP Manual Air Relief Valve with Pressure Gauge 25357-273-564. This dependable aftermarket assembly is purpose-built for Pentair Triton II sand filters (models TR100C and TR140C) and Triton C-3 filters. The integrated pressure gauge includes a clearly marked range indicator for at-a-glance readings, making it simple to determine when your filter needs backwashing. By allowing...

High Flow Manual Air Relief Valve & Gauge for Pentair Filters by CMP | 98209800 | 25357-982-000

Restore safe, efficient operation to your Pentair pool filter with the CMP High Flow Manual Air Relief Valve and Gauge assembly. This premium aftermarket replacement for the Pentair 98209800 ships as a complete kit containing the manual air relief valve, pressure gauge, rubber boot, and all supporting hardware needed for a full swap. The assembly enables you to quickly purge trapped air from inside the...

2" Pool Pressure Test Kit by CMP | Part 25501-100-000

Pinpoint leaks and verify proper operating pressure in your pool's plumbing with the CMP Pressure Test Kit 25501-100-000. Assembled specifically for 2-inch pool plumbing lines, this all-in-one kit ships with a 2-inch spigot, socket adapter, and a pressure gauge, giving you everything required to perform thorough pressure diagnostics. Setup calls for only standard hand tools and PVC cement, making it equally well-suited for seasoned pool...

Hayward SP0410X Slide Valve Bonnet Nut Replacement | CMP SPX0722D2 | 25831-004-170

Secure the valve assembly on your Hayward SP0410X Series Slide Valve with the CMP Bonnet Nut 25831-004-170. This black plastic nut is a precision-engineered aftermarket substitute for the Hayward SPX0722D2, providing the clamping force needed to keep the slide valve body sealed and functioning properly. It is commonly found on Hayward DE filter systems such as the Micro-Clear and Pro-Grid lines, where maintaining a leak-free...

8-Hole Filter Manifold for Pentair Purex by CMP | 073270Z | 25357-624-000

Maintain peak filtration efficiency with the CMP 8-Hole Manifold 25357-624-000, a precision replacement bottom manifold built for Pentair Purex SM and SMBW 2000 and 4000 Series D.E. filters. This manifold is the backbone of your filter's water distribution system, channeling water evenly across every grid for thorough, balanced filtration. Serving as a drop-in substitute for the factory-installed bottom manifold, it anchors the filter grids firmly...

Hayward S144T Pro Series Sand Filter Flange Clamp by CMP | GMX600NM | 27515-154-070

Hold your Hayward sand filter together with confidence using the CMP Flange Clamp 27515-154-070. This two-piece clamp, molded from rugged black Noryl plastic, locks the multiport valve securely to the filter tank on Hayward S144T Pro Series Sand Filters. Compatible across several Hayward top-mount sand filter lines including the Pro Series, Sand Master, Swim Pro, and E-Series, it arrives with all necessary bolts and nuts...

Valve Top Assembly by CMP | Fits Pentair 261177 & 261173 | 1.5" | 270068 | 27508-150-100

Bring your Pentair multiport valve back to like-new operation with the CMP Valve Top Assembly 27508-150-100, a comprehensive replacement engineered for Pentair HiFlow top mount and side mount multiport valves with 1.5-inch plumbing connections. This complete top assembly ships with the valve cover, operating handle, and all essential internal components needed to cycle through filter, backwash, rinse, and waste positions with confidence. Whether your existing...

CMP 25831-110-100 Backwash Valve Piston Kit - Replacement for Pentair FNS Plus Filter | 263055 | SW-26-055

Get your Pentair slide valve back in working order with the CMP Backwash Valve Piston Kit 25831-110-100. This aftermarket kit serves as a direct substitute for the Pentair 263055 piston shaft assembly and is commonly paired with FNS Plus DE filters. It contains the complete piston shaft assembly needed to restore proper backwash function, ensuring water flows correctly through your filtration system during cleaning cycles....