1.5" x 2" Hi-Temp PVC Threaded Union by CMP | 21063-160-000

Tackle high-temperature plumbing challenges with confidence using the CMP Hi Temp PVC Threaded Union. Equipped with a 1.5-inch male MIP thread on one side and a 2-inch PVC socket on the other, this union gives you the flexibility to connect different pipe sizes in pool and spa installations where heat resistance is essential. The premium PVC material handles elevated temperatures and constant chemical contact without...

1.5" x 1.5" Long Hi-Temp PVC Threaded Union by CMP | 21063-154-000

Achieve a dependable, drip-free connection in your pool or spa plumbing with the CMP Hi Temp PVC Threaded Union in the long-body configuration. This union pairs a 1.5-inch male MIP thread with a 1.5-inch PVC socket, making it suitable for a wide variety of plumbing layouts where consistent pipe sizing is needed. Built from robust PVC that resists thermal expansion, chemical attack, and prolonged moisture...

1.5" x 1.5" Short Hi-Temp PVC Threaded Union by CMP | 21063-150-000

The CMP 21063-150-000 short-body union is a high-temperature, self-sealing plumbing connector purpose-built for pool and spa equipment lines. One end accepts a 1.5-inch male iron pipe (MIP) thread while the other provides a 1.5-inch slip socket, giving you a fast, versatile connection point for pumps, filters, heaters, and other equipment. The body is molded from high-temperature Noryl material -- the same engineering-grade resin found in...

White 3/4" Insert Inlet Eyeball Fitting for Pool Returns | CMP 25551-300-000

The CMP Insert Inlet Eyeball Fitting (25551-300-000) is a white, 3/4-inch return fitting purpose-made for pool wall inlet installations. It features a 1.5-inch slip connection at the back and a 1-inch socket connection at the front, ensuring it works with a wide variety of pool plumbing configurations. This fitting is part of the CMP Insert Inlet series, which offers eyeball fittings in numerous sizes and...

Gray 3/4" Insert Inlet Eyeball Fitting for Pool Returns | CMP 25551-301-000

The CMP Insert Inlet Eyeball Fitting (25551-301-000) is a gray, 3/4-inch return fitting built for pool wall inlet use. Featuring a 1.5-inch slip connection on the back side and a 1-inch socket connection on the front, it integrates smoothly into diverse pool plumbing systems. This fitting is one of many in the CMP Insert Inlet range, which provides eyeball fittings across several sizes and color...

Dark Gray 3/4" Insert Inlet Eyeball Fitting for Pool Returns | CMP 25551-307-000

The CMP Insert Inlet Eyeball Fitting (25551-307-000) is a dark gray, 3/4-inch return fitting crafted for pool wall inlet installations. It comes with a 1.5-inch slip connection at the back and a 1-inch socket connection at the front, allowing it to work with a broad variety of pool plumbing arrangements. As part of the CMP Insert Inlet collection, this fitting is offered alongside other eyeball...

Black 3/4" Insert Inlet Eyeball Fitting for Pool Returns | CMP 25551-304-000

The CMP Insert Inlet Eyeball Fitting (25551-304-000) is a black, 3/4-inch return fitting engineered for pool wall inlet applications. Equipped with a 1.5-inch slip connection on the rear and a 1-inch socket connection on the front, it accommodates a wide range of pool plumbing layouts. This fitting belongs to the CMP Insert Inlet product line, which includes eyeball fittings in multiple sizes and color options...

Tan 3/4" Insert Inlet Eyeball Fitting for Pool Returns | CMP 25551-309-000

The CMP Insert Inlet Eyeball Fitting (25551-309-000) is a tan, 3/4-inch return fitting designed specifically for pool wall inlet applications. It incorporates a 1.5-inch slip connection on the rear and a 1-inch socket connection at the front, providing broad compatibility with common pool plumbing setups. Part of CMP's Insert Inlet family, this fitting is available alongside other eyeball fittings in a variety of sizes and...

2" Copper to PVC Compression Fitting Adapter | CMP 21098-200-000

Bridge the gap between copper and PVC plumbing with the CMP Copper to PVC Compression Fitting Adapter 21098-200-000. Purpose-built for pool and spa systems where 2-inch copper lines need to transition into 2-inch PVC pipe, this adapter delivers a tight, leak-resistant joint using a compression seal rather than solder or cement. The design clamps down around both pipe materials simultaneously, forming a dependable connection that...

2.5" PVC Pipe Extender by CMP | 21181-250-000

The CMP 2.5" Pipe Extender 21181-250-000 provides a practical way to lengthen existing 2.5-inch PVC plumbing runs in pool and spa installations. Rather than cutting out and replacing whole pipe sections, this extender lets you add length or bridge a repair gap with minimal disruption and far less waste. Manufactured from premium-grade PVC that holds up to the chemical and environmental stresses common in aquatic...

1.5" Clip-On Pipe Seal for Pool Plumbing | CMP 21184-150-000

Stop leaks at glued PVC joints fast with the CMP Clip-On Pipe Seal 21184-150-000. Sized for standard 1.5-inch PVC plumbing found in pool and spa systems, this white one-piece fitting simply snaps over the compromised joint to form a watertight barrier. There is no need to cut pipe, drain the system, or re-glue fittings, making it one of the quickest and least disruptive leak repairs...

2" Clip-On Pipe Seal for Pool Plumbing | CMP 21184-200-000

Fix leaking glued joints on 2-inch PVC pipe without the hassle of cutting and re-plumbing. The CMP Clip-On Pipe Seal 21184-200-000 is a white, single-piece repair fitting that snaps firmly over the damaged joint, creating an immediate watertight seal. Designed specifically for pool and spa plumbing, it eliminates the need for pipe disassembly, adhesives, or specialty equipment, drastically reducing repair time and system downtime. Key...

Venturi Tee #7 with Nozzle by CMP | Pool Spa Jet Part | 23309-000-000

Optimize the hydrotherapy performance of your gunite spa with the CMP Venturi Tee #7 with Nozzle 23309-000-000. This precision-molded component harnesses the Venturi principle to blend air into the water stream, producing powerful, invigorating jet action from your spa fittings. Configured with a 1-inch socket, 1-inch spigot, and 1-inch socket layout plus a 3/8-inch orifice nozzle, it integrates directly into standard spa plumbing for amplified...

2" Ortega Check Valve Seat Assembly by CMP | Part 25356-502-000

Prevent unwanted backflow and keep water moving in the right direction with the CMP Ortega Check Valve Seat Assembly 25356-502-000. Engineered as a drop-in replacement for 2-inch Pentair Ortega check valves, this assembly restores proper one-way flow control in pool and spa plumbing lines. The valve seat is molded from chemical-resistant PVC that holds up to aggressive sanitizers and balanced water chemistry, while stainless steel...

HydroSeal 2-Way PVC Diverter Valve 2" x 2.5" by CMP | 25932-201-000

Take command of your pool or spa's water flow with the CMP HydroSeal 2-Way PVC Diverter Valve. Equipped with a 2-inch socket and a 2.5-inch spigot, this gray PVC valve provides flexible plumbing connectivity for directing water between two different paths in your circulation system. Whether you need to switch flow between a pool and spa, redirect water to a solar heater, or manage any...