Pentair IntelliBrite LED Color Sync Controller for Pool & Spa Lights | 618031

The genuine Pentair LED Color Controller 618031 gives you complete command over Pentair IntelliBrite LED pool and spa lighting, letting you craft the perfect visual atmosphere. Choose from five solid color options—blue, green, red, white, and magenta—or select from seven built-in light shows tailored to different settings and moods. With built-in Wi-Fi connectivity and Pentair Home App support, you can manage your lights remotely, build...

79207500 Pentair Vinyl Pool Light Rubber Niche Gasket | 10 Hole Pattern

Protect your vinyl-liner pool light installation with the Pentair 79207500 Rubber Niche Gasket. Featuring ten precisely spaced mounting holes, this gasket forms a watertight barrier between the light niche and the vinyl liner, stopping moisture from seeping behind the wall and compromising the fixture or pool structure. The gasket is molded from a flexible, chemical-resistant rubber compound that maintains its seal through seasonal temperature swings...

600095 Pentair IntelliBrite LED Pool Light Face Ring Assembly with Clamp & Gasket

Refresh your pool lighting hardware with the Pentair 600095 stainless steel face ring assembly, a factory-original trim component built to pair with Pentair IntelliBrite White LED pool lights. The polished stainless steel construction resists chlorine-induced corrosion and UV degradation, maintaining its clean appearance and structural integrity for years beneath the waterline. Beyond its visual appeal, this face ring provides a secure, watertight seal when combined...

05501-0005 Pentair Sta-Rite Pool Light Lens Gasket Replacement

Protect your pool light from water intrusion with the genuine Pentair 05501-0005 Lens Gasket, engineered specifically for Sta-Rite pool and spa light fixtures. This precision-molded gasket forms a watertight barrier between the lens and the light housing, keeping moisture out of the electrical compartment where it could cause corrosion, short circuits, or bulb failure. Made from a resilient elastomer compound that resists chlorine, heat, and...

Pentair Clear Tempered Glass 4" for SpaBrite & AquaLight Lights | Part 79107800Z

Restore full illumination to your spa with the Pentair 79107800Z Clear Tempered Glass replacement lens. Sized at 4 inches, this OEM lens is specifically manufactured for Pentair SpaBrite and AquaLight spa light fixtures. Tempered glass construction delivers exceptional resistance to thermal shock, chemical exposure, and accidental impacts—far outperforming standard glass alternatives. The lens seats precisely within the light housing to form a reliable barrier against...

Pentair Lens Gasket 4" for SpaBrite & AquaLight Spa Lights | Part 79108500Z

Maintain a reliable, leak-free seal on your spa lighting with the Pentair 79108500Z Lens Gasket. This 4-inch OEM replacement gasket is manufactured specifically for Pentair SpaBrite and AquaLight spa light fixtures. Fabricated from resilient, high-grade compounds, it withstands ongoing exposure to heated water, pool sanitizers, and daily operational stress. The gasket sits between the lens and the fixture body, forming a dependable watertight barrier that...

Pentair SpaBrite Wire Clamp Assembly for Spa Lights | Part 79210400

Keep your spa light fixture sealed and secure with the Pentair 79210400 Wire Clamp Assembly. This genuine OEM stainless steel component holds the lens and gasket firmly in place on Pentair spa light fixtures, maintaining a watertight enclosure that protects internal electrical parts. The unitension design with a welded nut delivers consistent clamping force, ensuring the seal stays intact through daily operation and temperature changes....

Pentair Stainless Steel Face Ring for SpaBrite & AquaLite Spa Lights | Part 79111600Z

Upgrade the protection and appearance of your spa lights with the genuine Pentair 79111600Z Stainless Steel Face Ring. This OEM replacement component is designed to fit Pentair SpaBrite, AquaLight, and IntelliBrite_5G spa light fixtures. The ring mounts directly over the light lens, serving the dual purpose of safeguarding the fixture from physical damage and providing an attractive, polished trim. Constructed from premium stainless steel, it...

Pentair AmerQuartz & Amerlite Clear Tempered Lens 8-3/8" | Part 79100100

The genuine Pentair Clear Tempered Lens 79100100 is an 8 3/8 inch replacement lens built for Pentair Amerlite and AmerQuartz pool and spa light fixtures. Made from clear tempered glass, it delivers superior impact strength and thermal shock tolerance while ensuring peak light transmission and underwater safety. This lens is precision-sized for Amerlite and AmerQuartz housings, blocking water from entering the fixture and preserving the...

Pentair IntelliBrite 5G Tempered Lens and Gasket Assembly | 619864Z

The genuine Pentair 619864Z Tempered Lens and Gasket Assembly serves as a factory-spec replacement for IntelliBrite 5g 2nd Generation LED pool and spa lights. Packaged with a tempered glass lens, sealing gasket, mounting screw, and screw o-ring, this kit restores both the watertight integrity and crystal-clear light output of your underwater fixture. The tempered lens is built to handle hydrostatic pressure and thermal fluctuations, while...

Pentair Brass Pilot Screw with Captive Gum Washer for Pool Lights | Part 79104800

Keep your Pentair underwater lighting properly sealed with the genuine Pentair Brass Pilot Screw and Captive Gum Washer 79104800. Purpose-built for a wide range of Pentair pool and spa light models—including IntelliBrite, Amerlite, SpaBrite, and SunGlow II—this OEM fastener delivers a dependable, moisture-proof closure at the lens assembly. The solid brass construction stands up to prolonged chemical exposure and submersion without corroding, while the attached...

Pentair ColorVision LED Light Bubblers Eyeball Assembly Kit | 590135

The Pentair 590135 OEM Eyeball Assembly Kit is a critical service component for the ColorVision LED Light Bubbler platform, giving you precise command over both light projection and water stream direction. This factory kit bundles an eyeball fitting, optical lens, and sealing gasket that collectively govern the aim and output intensity of your bubbler feature. Every component is manufactured from corrosion-resistant, chemically stable materials that...

Pentair Sta-Rite SunLite Lens Gasket — Replacement Part 05601-0014

Protect your underwater lighting investment with the Pentair 05601-0014 lens gasket, an original equipment replacement part built for Sta-Rite SunLite pool and spa light fixtures. This gasket sits between the lens cover and the fixture housing, forming a watertight barrier that shields sensitive electrical components from moisture intrusion. Crafted from resilient, pool-grade rubber, it holds up against constant chlorine contact, elevated water temperatures, and hydrostatic...

Pentair Stainless Steel Face Ring Assembly for Large Pool Lights | Part 79110600

Give your pool lighting a clean, finished appearance with the genuine Pentair Stainless Steel Face Ring Assembly 79110600. This OEM replacement part is built to fit multiple Pentair light series, including IntelliBrite, Amerlite, AmerQuartz, and Spectrum Amerlite fixtures. Fabricated from high-grade stainless steel, the face ring resists corrosion from pool chemicals, UV radiation, and physical wear—making it equally suited for residential backyard pools and high-traffic...

Pentair Stainless Steel Niche Sealing Ring for Pool Lights | Part 79206000

Protect your pool lighting from water intrusion with the genuine Pentair 79206000 Sealing Ring. This OEM replacement component is specifically manufactured for Pentair small stainless steel niches, forming a tight barrier between the niche body and the pool light to keep moisture away from electrical connections. Its six-hole mounting pattern ensures evenly distributed clamping pressure for a uniform, gap-free seal. Well suited for vinyl liner...

Pentair Brass Mounting Ring for Large Stainless Steel Niches | 79211600

Securely anchor your pool lights during concrete pool construction or replastering with the genuine Pentair 79211600 Mounting Brass Ring. This heavy-duty plaster mounting ring is purpose-built for large stainless steel niches in Pentair lighting installations. Fabricated from solid brass, it delivers exceptional resistance to the corrosive conditions found in concrete pool environments, ensuring stable light positioning for the long haul. Whether you are building a...