Pentair Push Pull Valve for American Products Sand & DE Filters — Part 263052

The Pentair 263052 Push-Pull Valve is a genuine OEM replacement manufactured specifically for American Products sand and D.E. filter systems. Featuring an 8-inch centerline and direct 2-inch PVC union side port connections, this valve offers adaptable plumbing integration and can also accommodate 1-1/2-inch lines when paired with reducer fittings. Its streamlined two-position design minimizes internal flow restriction, delivering superior performance during both standard filtration and...

Pentair Push Pull Valve for System 2 & System 3 Filters — Part 263053

The Pentair 263053 Push-Pull Valve is a genuine OEM component purpose-built for Pentair System 2 and System 3 filter platforms, providing precise management of backwash and filtration cycles. This rugged valve is equipped with 2-inch PVC union ports and a 7.81-inch centerline for direct, gap-free integration with your existing filter plumbing. The heavy-duty PVC body is formulated to endure the chemical exposure and mechanical demands...

Pentair PVC Push Pull Slide Valve for FNS Plus & Quad DE Filters — 263064 / 261165

Engineered as a direct-fit solution for Pentair FNS Plus and Quad DE filter systems, the Pentair 263064 PVC Push-Pull Slide Valve (supersedes 261165) delivers reliable toggling between filtration and backwash operations. Its heavy-duty PVC construction and 7.5" centerline provide a tight seal and precise water management. Whether you are upgrading an aging valve or completing a fresh installation, this component streamlines routine pool care with...

Pentair Union Swivel Body for Clean and Clear Filters | 79304600

Restore leak-free plumbing connections on your Pentair filter with the genuine Pentair 79304600Z Union Swivel Body. This OEM replacement part serves as a union tailpiece for Pentair cartridge filter systems, including Clean & Clear, Predator, Warrior, and EasyClean models. Despite the name, this component functions as a fixed union body rather than a rotating joint, delivering a solid, watertight plumbing connection. Measuring approximately 3 inches...

Pool Hydrostream Return Jet 1.5" Sleeve 0.375" Opening | Pooline 11212D

The Pooline Hydrostream Jet Sleeve 11212D delivers targeted water movement for pool and spa plumbing systems. Featuring a 1.5-inch sleeve body with a 0.375-inch opening, this directional jet inserts directly into 1.5-inch PVC pipe for straightforward setup. Its sturdy white plastic housing measures 2-3/8 inches across the face and 1.5 inches in length, providing focused water output that promotes superior circulation and a steady, directed...

Pool Hydrostream Return Jet 1.5" Sleeve 0.5" Opening | Pooline 11212C

Direct water flow with precision using the Pooline Hydrostream Jet Sleeve 11212C. This 1.5-inch sleeve with a 0.5-inch opening creates a focused jet stream tailored for pool and spa circulation needs. Engineered to drop into 1.5-inch PVC pipe, it requires no special tools or adapters for installation. The resilient white plastic body spans 2-3/8 inches at the face and 1.5 inches in depth, delivering reliable,...

Pool Hydrostream Return Jet 1.5" Sleeve 0.75" Opening | Pooline 11212B

Maximize your pool's water circulation with the Pooline Hydrostream Jet Sleeve 11212B. Equipped with a 1.5-inch sleeve and a 0.75-inch opening, this directional jet fitting produces a powerful, concentrated stream ideal for pool and spa plumbing. It seats securely into 1.5-inch PVC pipe for a quick, tool-free setup. Constructed from durable white plastic with a 2-3/8-inch face diameter and 1.5-inch length, it provides consistent, directed...

Pool Hydrostream Return Jet 1.5" Sleeve 1" Opening | Pooline 11212A

Boost water turnover in your pool or spa with the Pooline Hydrostream Jet Sleeve 11212A. Featuring a 1.5-inch sleeve and a full 1-inch opening, this jet fitting delivers a high-volume, directional water stream for robust circulation. It inserts smoothly into 1.5-inch PVC pipe, making replacement or new installation effortless. Built from long-lasting white plastic, the sleeve measures 2-3/8 inches across the face and 1.5 inches...

Rola-Chem PVC Check Valve for Peristaltic Pumps | 3/8" x 1/4" | 521170

The Rola-Chem 521170 is a heavy-duty PVC check valve engineered to work hand-in-hand with Rola-Chem Peristaltic Metering Pumps. Equipped with a 3/8-inch hose barb on one end and a 1/4-inch male NPT fitting on the other, this valve is a critical link in any chemical dispensing setup for pool and spa water treatment. It allows chemicals to flow in one direction only, eliminating backflow that...

Swimables 1.5" Vacuum Hose Repair Cuff - 1.5" Slip x 2" Threaded | SW-64-211

Get your vacuum hose back in working order with the Swimables 1.5 Inch Vacuum Hose Repair Cuff, built with a 1-1/2 inch slip by 2 inch threaded layout and constructed entirely from robust PVC. Produced using top-grade plastic resins, this repair cuff delivers dependable, trouble-free performance over many seasons of pool maintenance. It is an essential fitting for splicing or restoring damaged vacuum hoses, providing...

Swimables Street Sweep 90 Elbow - 2" Socket x 2" SPG | SW-39-912

Route your pool or spa plumbing with precision using the SW_39_912 Swimables 2" Socket x 2" Street_Sweep 90-degree Elbow. This professional-grade fitting channels water through a gentle sweeping curve, pairing a 2" female slip socket on one end with a 2" male spigot (street) connection on the other for direct pipe-to-fitting transitions without extra adapters. Constructed from premium, pool-rated PVC, it delivers outstanding resistance to...

Swimables Sweep 90 Degree Elbow - 2" Socket x 2" SPG | SW-39-913

Achieve low-turbulence directional changes in your pool or spa plumbing with the Swimables SW_39_913 2_ Socket x 2_ Spigot (SPG) Sweep 90-degree Elbow. This top-tier fitting is molded from sturdy PVC and shaped with a gradual sweep radius that cuts down on friction losses and supports peak hydraulic throughput. A 2_ female socket on one side and a 2_ male spigot on the other deliver...

Unions for Powerclean Ultra Salt Cell Housing by CMP | 2 Pack | CMPPUCUNIONS

Achieve a watertight, perfectly aligned plumbing connection for your salt chlorination system with the CMP 2" Slip by Slip Self-Aligning PVC Union, purpose-built for the PowerClean Ultra Salt Cell Housing. The self-aligning geometry of this union takes the guesswork out of pipe alignment, creating a solid, drip-free joint between the salt cell housing and your pool's plumbing network. Molded from industrial-strength PVC that handles temperature...

Waterway 1.5" 90° Sweep Elbow for Pool Plumbing — Part 411-9110

The Waterway 411-9110 90-Degree Sweep Elbow is a 1.5-inch slip x slip PVC fitting crafted to enhance directional water routing in pool and spa plumbing configurations. Its gradual 90-degree sweep arc cuts down on turbulence and pressure decline, fostering reliable circulation throughout the plumbing network. Fabricated from hardy, chemically inert PVC, this component delivers consistent results in both first-time installations and system renovation work. The...

Waterway 1.5" MPT x 1.5" Hose 90° Smooth Elbow — Part 411-6540

The Waterway 411-6540 90-Degree Smooth Elbow is a purpose-designed plumbing connector built for pool and spa circulation networks. One end features a 1.5-inch male pipe thread (MPT) while the opposite end provides a 1.5-inch smooth hose barb, creating a solid bridge between threaded plumbing components and flexible hosing. The 90-degree angle facilitates clean directional routing with minimal drag on water flow. Manufactured from tough white...

Waterway 120-0140-60CP Flexible PVC Pipe - White, 5' Length, 1-1/2" Diameter

Simplify even the most challenging plumbing runs with the Waterway Flex Pipe, a 1-1/2-inch diameter white flexible pipe measuring 5 feet in length. Proudly manufactured in the USA, this pipe bends smoothly around obstacles, through tight spaces, and along curved paths, eliminating the need for multiple elbow fittings and reducing potential leak points. Its featherweight construction makes handling effortless, while the tough, crack-resistant material holds...

Waterway 120-0150-60CP Flexible PVC Pipe - White, 5' Length, 2" Diameter

Tackle demanding plumbing configurations with the Waterway Flex Pipe, a 2-inch diameter white flexible pipe spanning 5 feet. Made in the USA from premium resilient material, this pipe curves effortlessly around structural obstacles and through narrow passages, removing the need for numerous rigid fittings at every turn. The result is fewer connection points, lower leak potential, and faster installation. Engineered to resist cracking, chemical corrosion,...

Waterway 2" 90-Degree Sweep Elbow — Part 411-9120

The Waterway 411-9120 90-Degree Sweep Elbow is a 2-inch slip x slip PVC fitting designed to facilitate gentle directional changes in pool and spa plumbing networks. The sweeping curve geometry reduces water turbulence and preserves system pressure, helping sustain peak hydraulic output. This elbow is made from strong, corrosion-proof PVC that performs reliably despite continuous contact with pool sanitizers and treatment chemicals. Appropriate for both...

Waterway 2" Slip x Slip 90-Degree Sweep Elbow — Part 411-9130

The Waterway 411-9130 90-Degree Sweep Elbow is a 2-inch slip x slip PVC fitting purpose-built to navigate water through directional transitions within pool and spa plumbing systems. Its flowing sweep profile encourages efficient water travel while cutting down on hydraulic resistance and pressure decline. Made from corrosion-resistant and chemically stable PVC, this elbow performs dependably in harsh aquatic operating conditions. Versatile enough for inclusion in...

Waterway 2" Split Nut for Pool & Spa Heaters — Part 400-5161B

The Waterway 400-5161B 2-Inch Split Nut is a robust OEM replacement part engineered to fasten plumbing junctions in pool and spa heater configurations. Manufactured from resilient PVC material, this split nut thrives in environments where chemical sanitizers and persistent moisture are present. It accommodates the majority of standard 2-inch heater tubes and comes equipped with pre-drilled mounting points along with the necessary screws for rapid...