1.5" MPT Vac Lock Safety Wall Fitting in Black by Swimables — W400BWHP | SW-30-404

Upgrade your pool's vacuum port with the Swimables SW-30-404 Vac Lock in black, a direct substitute for the Hayward W400BWHP. Threaded at 1.5-inch MPT for universal plumbing compatibility, this fitting employs a rotating, spring-loaded snap-lock that grips the vacuum hose firmly throughout every cleaning session. The bold black finish pairs with chemical-resistant construction to deliver lasting good looks and dependable function, while broad compatibility with...

Universal EZ Hose Swivel for Pool Cleaners | SW-60-001 by Swimables

Say goodbye to kinked, twisted cleaner hoses with the Swimables Pool Cleaner Hose Swivel EZ SW-60-001. This clever inline accessory features a full 360-degree rotating joint that lets suction-side cleaner hoses pivot freely as the unit navigates your pool. Without a swivel, hoses accumulate torsional stress that restricts movement, pulls the cleaner off course, and can eventually damage hose sections. The Swivel EZ neutralizes that...

Swimables Blue Front Tires with Super Humps 2-Pack for Hayward Poolvergnuegen Aquanaut PoolCleaner | Swimables 896584000-143 | SW-61-143

Get your suction-side cleaner rolling again with the Swimables Aftermarket Front Tire 2-Pack SW-61-143, a precision-engineered substitute for the Hayward 896584000-143. Each tire is built to Swimables' exacting quality standards, delivering OEM-equivalent traction and cleaning coverage right out of the box. The Super Hump tread design grips all pool surface types for consistent, reliable debris pickup. Installation takes just minutes with no special tools or...

4' Automatic Pool Cleaner Sectional Leader Hose – Forest Gray | LEADAPC204W | Swimables SW-64-200

Connect your automatic pool cleaner to the skimmer or suction port with confidence using the Swimables SW-64-200 Sectional Leader Hose. This 4-foot forest gray hose segment is manufactured in the USA from heavy-duty, flexible material that resists kinking and UV degradation. Designed as a universal leader connector, it works with the vast majority of suction-side pool vacuums on the market, so you do not have...

Heavy Duty Large Pool Leaf Canister for Suction Cleaners - Made in USA by Swimables - Part SW-10-530

The Swimables SW-10-530 Leaf Canister is an American-made powerhouse built with a rugged, heavy-duty body for serious debris management. Its tool-free twist-off lid gives you instant access to the oversized collection bag, cutting maintenance time to a minimum. Unlike competitors that use glued-on handles prone to snapping, this canister features a one-piece molded handle that is permanently integrated into the body for unbreakable grip and...

Large Capacity Leaf Canister Bag Replacement for W530 by Swimables - Part SW-10-538

Maintain peak debris-trapping performance in your leaf canister with the Swimables Replacement Bag SW-10-538, built to drop right into the W530 canister for a perfect match. Its oversized capacity means you can collect more leaves, twigs, and floating debris before needing to empty, letting your cleaning sessions run longer without interruption. Sewn from heavy-duty mesh that resists tearing and stretching, this bag stands up to...

Swimables 1.5" Vacuum Hose Repair Cuff - 1.5" Slip x 2" Threaded | SW-64-211

Get your vacuum hose back in working order with the Swimables 1.5 Inch Vacuum Hose Repair Cuff, built with a 1-1/2 inch slip by 2 inch threaded layout and constructed entirely from robust PVC. Produced using top-grade plastic resins, this repair cuff delivers dependable, trouble-free performance over many seasons of pool maintenance. It is an essential fitting for splicing or restoring damaged vacuum hoses, providing...

Swimables Replacement Gear Box Assembly for Hayward Navigator Pro & Pool Vac Cleaners | Swimables AXV408P | SW-61-408

Restore peak cleaning performance to your Hayward Navigator Pro or Pool Vac with the Swimables Gear Box Assembly SW-61-408. This precision-engineered replacement component delivers the reliable gear-driven motion your suction cleaner depends on for thorough pool coverage. Constructed from superior materials chosen for their resistance to chlorine, UV exposure, and constant submersion, this gear box assembly stands up to the rigors of daily pool cleaning....

Swimables Replacement Hayward Navigator & Pool Vac Turbine Bearings 2-Pack by Swimables — AXV055P | SW-61-055

Give your Hayward Navigator or Pool Vac cleaner the smooth, reliable turbine action it needs with the Swimables SW-61-055 Turbine Bearings. Sold as a convenient 2-pack, these bearings minimize internal friction in the turbine assembly so the cleaner can glide across your pool without hesitation. Produced from robust, pool-grade materials, they stand up to continuous operation and chemical exposure while keeping noise and vibration to...

Swimables Replacement Hayward Navigator & Pool Vac Universal A-Frame Turbine Kit by Swimables — AXV621DAT | SW-61-621

Bring your Hayward Navigator or Pool Vac cleaner back to like-new condition with the Swimables SW-61-621 Universal A-Frame and Turbine Kit. This all-in-one package bundles the most commonly worn drivetrain parts into a single box: two soft roller A-frames complete with bushings, a saddle, keeper, main turbine, bearings, hex head pod screws, pod screw washers, and step-by-step installation instructions. Every component is built from durable,...

Swimables Replacement White Pod Kit for Hayward Navigator & Pool Vac Cleaners | AXV417WHP | SW-61-417 by Swimables

Restore agile movement and thorough debris pickup to your Hayward suction cleaner with the Swimables Pod Kit SW-61-417. This white replacement pod kit ships with both left and right pod assemblies plus the corresponding pod plugs, delivering a complete solution in a single package. Each component is produced from high-grade materials chosen for their durability in submerged, chemically treated environments. Properly functioning pods are essential...

Swimables Replacement Hayward Navigator & Pool Vac Cleaner Flap Kit | Swimables AXV434WHP | SW-61-434

Restore peak suction and debris-capturing ability to your Hayward pool cleaner with the Swimables SW-61-434 flap kit. This white replacement set supplies both front and rear flaps, the critical components responsible for directing water flow and trapping debris beneath the cleaner body. Constructed from sturdy, wear-resistant material, these flaps deliver consistent performance even under heavy use. The straightforward swap-out process means you can have your...

Swimables Replacement Hayward Navigator & Pool Vac Cleaner Lower Body (White) by Swimables - Part AXV230DWH / SW-61-230

Bring your Hayward suction cleaner back to factory form with the Swimables SW-61-230 Lower Body, a white replacement shell engineered for Navigator and Pool Vac models. This component forms the structural foundation of your cleaner, housing the internal mechanisms that guide movement and suction across your pool surfaces. Molded from impact-resistant, UV-stable material, it resists cracking and discoloration even after prolonged underwater exposure. The precision-matched...

Swimables Replacement Concrete Pod Shoes 4-Pack for Hayward Navigator & Pool Vac – Swimables AXV414P (SW-61-414)

Restore peak traction on your pool cleaner with the Swimables Concrete Pod Shoes SW-61-414, precision-engineered replacement parts tailored for Hayward Navigator and Pool Vac automatic cleaners. These four-pack pod shoes are shaped to glide evenly across concrete pool surfaces, delivering reliable grip and thorough debris pickup. Crafted from hard-wearing materials, each shoe includes built-in wear indicators that make it simple to gauge when a fresh...

Swimables Replacement Hayward Navigator Pool Vac Wing Kit Replacement | AXV604WHP | SW-61-604 by Swimables

Keep your Hayward Navigator or Pool Vac running at peak efficiency with the Swimables Wing Kit SW-61-604, a premium aftermarket replacement for the Hayward AXV604WHP. This kit supplies two precision-engineered wings that restore proper stabilization and tracking, allowing your cleaner to navigate walls, floors, and curves with confidence. Crafted from resilient, wear-resistant materials, these wings minimize friction-related degradation and help your cleaner perform reliably across...

Zodiac G3 & G3 Pro Pool Cleaner Long Life Diaphragm with Retaining Ring (Yellow) by Swimables - Part W69698 / SW-62-698

Revitalize the suction power of your Zodiac Baracuda pool cleaner with the Swimables SW-62-698 Long Life Diaphragm and Retaining Ring set, purpose-built for G3 and G3 Pro models. This yellow diaphragm serves as the engine behind your cleaner's movement, flexing rhythmically to generate the pulsing suction that drives navigation and debris pickup across your pool floor. The accompanying retaining ring locks the diaphragm securely in...

Zodiac Baracuda G3 & G3 Pro Finned Disc Replacement | Swimables W70329 | SW-62-329

Revitalize your Zodiac Baracuda pool cleaner's cleaning power with the Swimables SW-62-329 finned disc. Matching the original Zodiac W70329, this replacement disc is molded from tough, flexible rubber and features 36 precision-cut fins that boost both traction and suction strength. The result is improved maneuverability on all pool surface types and more thorough debris pickup. By channeling dirt and particles toward the filtration system, this...

Polaris Vac-Sweep 180 & 280 Turbine Ball Bearing by Swimables — C80 | SW-62-180

Restore smooth turbine rotation in your Polaris Vac-Sweep 180 or 280 with the Swimables SW-62-180 Turbine Ball Bearing. This precision-crafted bearing sits at the heart of the turbine drive shaft, allowing it to spin freely so the cleaner can propel itself across every inch of your pool. Built from wear-resistant materials that hold up in chemically treated water, this bearing keeps your cleaner running quietly...

Polaris Cleaner Universal Wall Fitting Connector by Swimables — 9-100-9001 | SW-62-900

Connect your Polaris pressure-side cleaner to its dedicated wall line with total confidence using the Swimables SW-62-900 Universal Wall Fitting Connector. This adapter bridges the gap between your cleaner hose and the pressure port in the pool wall, forming a snug, drip-free joint that sustains full water pressure to the cleaner head. Molded from heavy-duty, chemical-proof polymer, it resists cracking and discoloration even after years...

Polaris Pool Cleaner Back Up Valve Replacement | G52 | Swimables SW-62-052

Restore full navigational capability to your Polaris pressure-side pool cleaner with the Swimables SW-62-052 Back-Up Valve. Serving as a reliable replacement for models 180, 280, and 380, this valve plays a vital role in keeping your cleaner from becoming trapped in corners or along walls. Operating on a built-in timer, it activates roughly every 3 minutes and stays open for approximately 30 seconds, generating a...