Waterway 8" Anti-Vortex Main Drain Cover and Frame Black | 640-2311BV

The genuine Waterway Main Drain Anti-Vortex Cover 640-2311BV is an 8-inch black safety cover purpose-built to protect against suction hazards while maintaining optimal water circulation in pools and spas. Its anti-vortex engineering eliminates dangerous vortex formation over the main drain, greatly reducing entrapment risks. The cover supports a floor flow rate of 100 gallons per minute at 2.72 feet per second and a wall flow...

Waterway 212-8571-DSGSG Deluxe Roto Internal Poly Jet

Transform your spa experience with the Waterway Deluxe Roto Internal Poly Jet (Part Number: 212-8571-DSGSG), a thoughtfully engineered jet insert that delivers a smooth, rotating water stream for therapeutic relaxation. Its 3-3/8 inch deluxe scalloped face in gray, accented with stainless steel trim, strikes the perfect balance between refined aesthetics and high-performance function. The rotating nozzle produces a rhythmic, swirling massage action that melts away...

Waterway 120-0150-60CP Flexible PVC Pipe - White, 5' Length, 2" Diameter

Tackle demanding plumbing configurations with the Waterway Flex Pipe, a 2-inch diameter white flexible pipe spanning 5 feet. Made in the USA from premium resilient material, this pipe curves effortlessly around structural obstacles and through narrow passages, removing the need for numerous rigid fittings at every turn. The result is fewer connection points, lower leak potential, and faster installation. Engineered to resist cracking, chemical corrosion,...

Waterway 120-0140-60CP Flexible PVC Pipe - White, 5' Length, 1-1/2" Diameter

Simplify even the most challenging plumbing runs with the Waterway Flex Pipe, a 1-1/2-inch diameter white flexible pipe measuring 5 feet in length. Proudly manufactured in the USA, this pipe bends smoothly around obstacles, through tight spaces, and along curved paths, eliminating the need for multiple elbow fittings and reducing potential leak points. Its featherweight construction makes handling effortless, while the tough, crack-resistant material holds...

Waterway Plastics 1" Eyeball Fitting — Gray (400-9187)

The Waterway 400-9187 Econo Plastics Eyeball Fitting in gray is precision-engineered to regulate the direction of water flow within your pool system, promoting stronger circulation and improved water transparency. Sized to seat inside 1-inch pipe openings, this resilient fitting delivers an adjustable water stream that grants you greater command over where flow is directed. Built from quality-grade materials, it presents an affordable upgrade path without...

Waterway Hose Adapter 1.5" MPT x 1.5" Hose — Part 417-6140

The Waterway Hose Adapter 417-6140 is a rugged plumbing fitting engineered to connect a 1.5-inch male pipe thread (MPT) outlet to a 1.5-inch hose within pool and spa systems. Featuring a smooth male adapter profile, it creates a firm and dependable seal that minimizes drips and maintains even water delivery. Constructed from materials specifically formulated for poolside use, this fitting resists chemical degradation, water pressure,...

Waterway 8" Dark Gray Anti-Vortex Main Drain Cover & Frame | 640-2319-DKGV

The genuine Waterway Main Drain Anti-Vortex Cover 640-2319-DKGV is an 8-inch dark gray drain cover and frame assembly built to enhance both safety and water flow in pool and spa plumbing systems. The anti-vortex profile works by breaking up vortex formation at the main drain, substantially lowering the possibility of suction entrapment for swimmers. Rated for a floor flow of 100 gallons per minute at...

Waterway 8" Tan Anti-Vortex Main Drain Cover & Frame | 640-2319-BEIV

The genuine Waterway 640-2319-BEIV Anti-Vortex Main Drain Cover is an 8-inch tan safety cover engineered to deliver both swimmer protection and high-efficiency water flow in pool and spa systems. By disrupting vortex suction patterns, this cover minimizes the threat of entrapment and supports compliance with contemporary pool safety regulations. It provides a floor flow rate of 100 GPM at 2.72 ft/sec and a wall flow...

Waterway 8" Gray Anti-Vortex Main Drain Cover & Frame | 640-2317V

The genuine Waterway Main Drain Anti-Vortex Cover 640-2317V is an 8-inch gray safety cover designed to bolster swimmer protection and sustain effective water movement in pools and spas. Equipped with anti-vortex technology, this cover neutralizes hazardous suction by preventing vortex formation at the drain opening. It achieves a floor flow rate of 100 gallons per minute at 2.72 feet per second and a wall flow...

Waterway 8" Anti-Vortex Main Drain Cover and Frame White | 640-2310V

The genuine Waterway Main Drain Anti-Vortex Cover 640-2310V is an 8-inch safety-rated cover built to minimize suction risks while promoting strong water circulation in pools and spas. Its anti-vortex profile disrupts dangerous suction patterns by preventing vortex formation directly above the main drain. When floor-mounted, the cover handles 100 gallons per minute at 2.72 feet per second; on a wall installation, it sustains 64 gallons...

411-9100 Waterway 1.5" Sweep Elbow Fitting for Pool Plumbing

The Waterway Sweep Elbow 411-9100 is an OEM 1.5-inch PVC fitting crafted to deliver seamless directional changes within pool and spa plumbing lines. Featuring a 1.5-inch spigot connection on one side and a 1.5-inch slip socket on the other, this elbow integrates smoothly into conventional plumbing setups. Its gradual 90-degree sweep geometry minimizes friction losses and turbulent flow patterns, helping sustain steady water circulation throughout...

Waterway 1.5" 90° Sweep Elbow for Pool Plumbing — Part 411-9110

The Waterway 411-9110 90-Degree Sweep Elbow is a 1.5-inch slip x slip PVC fitting crafted to enhance directional water routing in pool and spa plumbing configurations. Its gradual 90-degree sweep arc cuts down on turbulence and pressure decline, fostering reliable circulation throughout the plumbing network. Fabricated from hardy, chemically inert PVC, this component delivers consistent results in both first-time installations and system renovation work. The...

Waterway 2" 90-Degree Sweep Elbow — Part 411-9120

The Waterway 411-9120 90-Degree Sweep Elbow is a 2-inch slip x slip PVC fitting designed to facilitate gentle directional changes in pool and spa plumbing networks. The sweeping curve geometry reduces water turbulence and preserves system pressure, helping sustain peak hydraulic output. This elbow is made from strong, corrosion-proof PVC that performs reliably despite continuous contact with pool sanitizers and treatment chemicals. Appropriate for both...

Waterway 2" Slip x Slip 90-Degree Sweep Elbow — Part 411-9130

The Waterway 411-9130 90-Degree Sweep Elbow is a 2-inch slip x slip PVC fitting purpose-built to navigate water through directional transitions within pool and spa plumbing systems. Its flowing sweep profile encourages efficient water travel while cutting down on hydraulic resistance and pressure decline. Made from corrosion-resistant and chemically stable PVC, this elbow performs dependably in harsh aquatic operating conditions. Versatile enough for inclusion in...

Waterway Hose Fitting Adapter 1.5" x 1.25" — Part 417-6080

The Waterway Hose Fitting Adapter 417-6080 is a robust coupling built to attach 1.5-inch spigot fittings to 1.25-inch hoses in pool and spa plumbing networks. Designed for a tight, sealed connection, this adapter prevents moisture loss and sustains even water delivery throughout your system. Manufactured from premium, chemical-resistant material, it maintains structural integrity in the face of chlorinated water, elevated temperatures, and continuous operation. From...

Waterway 1.5" MPT x 1.5" Hose 90° Smooth Elbow — Part 411-6540

The Waterway 411-6540 90-Degree Smooth Elbow is a purpose-designed plumbing connector built for pool and spa circulation networks. One end features a 1.5-inch male pipe thread (MPT) while the opposite end provides a 1.5-inch smooth hose barb, creating a solid bridge between threaded plumbing components and flexible hosing. The 90-degree angle facilitates clean directional routing with minimal drag on water flow. Manufactured from tough white...

Waterway 2.5" Slip x 2.5" Slip 90-Degree Sweep Elbow — Part 411-9150

The Waterway 411-9150 90-Degree Sweep Elbow is a 2.5-inch slip x slip fitting purpose-engineered to manage water direction within pool and spa plumbing. Its gradual sweep profile diminishes friction and sustains uninterrupted water movement, providing less flow resistance than conventional sharp-angle elbows. Constructed from enduring, chemically resistant PVC, this fitting is manufactured for years of reliable service in demanding aquatic settings. Well-suited for both newly...

Waterway Union Tailpiece 2" Buttress x 2" Slip — Part 417-5040B

The Waterway Union Tailpiece 417-5040B provides a dependable plumbing bridge between 2-inch buttress threaded fittings and 2-inch slip connections within pool and spa equipment. Engineered for dual compatibility with both 2-inch and 2.5-inch heater unions, this versatile tailpiece accommodates a broad range of heating and circulation configurations. Its chemical-resistant construction stands up to the demanding conditions of treated water environments, delivering years of trouble-free service....

Waterway Hose Fitting Adapter 1.5" MPT x 1.25" Hose — Part 417-6060

The Waterway Hose Fitting Adapter 417-6060 is a sturdy white plastic coupling that bridges 1.5-inch male pipe thread (MPT) connections to 1.25-inch flexible hoses in pool and spa plumbing setups. This adapter forms a snug, leak-proof junction that promotes reliable water delivery and reduces the chance of drips at the connection point. Engineered from chemical-resistant plastic, it holds up against prolonged exposure to treated pool...

Waterway 2" Pump Union Nut with 45° Spigot & O-Ring — Part 400-4300B

Simplify pump-to-plumbing connections in tight spaces with the OEM Waterway 2" Pump Union Nut with 45-Degree Spigot and O-Ring 400-4300. This complete connection package bundles a 2-inch union nut, a 2-inch spigot angled at 45 degrees, and a sealing O-ring into a single, ready-to-install assembly. The angled spigot is specifically designed for equipment pads and mechanical rooms where straight-line pipe runs aren't possible, reducing stress...