Waterway O-Ring for Pentair Pump Trap Lid | 805-0436

The Waterway 805-0436 Trap Lid O-Ring is a factory-spec gasket engineered for pump trap lids across numerous Pentair and Waterway pool pump lines, including the WhisperFlo, IntelliFlo, and Champion families. This high-grade O-ring delivers a secure, airtight closure that guards against water seepage and upholds proper pressure inside the pump housing. Made from long-wearing, chemically resistant elastomer, it provides a trustworthy solution for protecting pump...

Waterway 6" Ultra Suction 1.5" Wall Fitting | 640-8240V

The genuine Waterway Ultra Suction 6" Wall Fitting with 1.5" Threaded Connection 640-8240V is purpose-built for seamless installation across a wide range of pool and spa construction types, including Gunite, Fiberglass, Vinyl, Tile, and Steel. Its sumpless architecture removes the need for a separate sump body, cutting down on installation complexity while delivering outstanding flexibility. Fabricated from NSF-rated PVC, this fitting offers exceptional strength and...

Waterway Faceplate Gasket for Mustang Econ Flo and Champion Pumps | 806-1400 / 711-1400

The Waterway 806-1400 Faceplate Gasket is a factory-engineered replacement seal tailored for Champion 56-frame and Econo-Flo variable-speed pool pumps. Built to original equipment tolerances, this gasket forms a leak-proof barrier between the cover plate and motor housing, promoting correct alignment and maximum pump efficiency. Constructed from sturdy, chemical-resistant rubber featuring a rounded cross-section, it stands up to chlorine exposure, ultraviolet radiation, and changing operational conditions....

Waterway Diffuser Screw for Pool Pumps | 819-0018

The Waterway 819-0018 Diffuser Screw is a factory-spec stainless steel fastener made for Waterway pool pumps, including the SVL56 High-Flow, SMF, and Champion 56-Frame lines. This screw anchors the diffuser firmly within the pump assembly, preserving correct alignment and preventing any drop in performance. At 1-1/4 inches long with a #4-40 thread size, it provides a dependable hold in the wet, chemically demanding conditions found...

Waterway Diffuser O-Ring for Mustang and Champion Pumps | 805-0238

The Waterway 805-0238 Diffuser O-Ring is a factory-grade sealing gasket built specifically for Waterway pool pumps, including the SVL56 High-Flow, Champion 56-Frame, and Mustang VS 1.4HP units. With an inside diameter of approximately 3-1/2 inches, this O-ring seats firmly between the diffuser and the pump housing to guard against leaks and sustain reliable pump operation. Manufactured from hardy elastomer formulated to resist pool sanitizers and...

Waterway Pump Basket for Mustang & Champion Series — Part 319-1430B

The OEM Waterway Basket 319-1430B is a factory-spec replacement pump basket that intercepts debris before it can reach the impeller, safeguarding the operation and service life of your Waterway Champion and Mustang pumps. Compatible with Champion 56-Frame, SMF, and Mustang VS 1.4HP pump models, this basket drops right in for a precise, gap-free fit. Crafted from resilient, pool-grade plastic that resists cracking and chemical deterioration,...

Waterway Pump Trap Lid — Replacement Part 319-4100

The OEM Waterway 319-4100 Trap Lid is a genuine replacement pump lid that provides a leak-proof, airtight seal on a wide range of Waterway pool and spa pumps, including Champion 56-Frame, VS 1.4HP Mustang, Econo Flo, and SMF models. Featuring a convenient self-locking mechanism, this lid allows you to access the pump basket quickly for cleaning and inspection without special tools. The transparent, impact-resistant construction...

Waterway 2" x 2" Pump Trap Assembly — Part 310-6600

Keep your pool or spa pump running at peak efficiency with the OEM Waterway Pump Trap 310-6600. This complete 2 inch by 2 inch strainer assembly stands 6 inches tall and provides thorough debris filtration that safeguards your pump’s internal components. Bundled with a strainer basket, locking ring, and transparent lid with O-ring, this trap is ready to install right out of the box. It...

Waterway Pump Trap Lid for SVL56 Series — Part 511-1310

Get your SVL56 high-flow pump back to peak operation with the genuine Waterway 511-1310 Clear Trap Lid. This factory-original cover locks down over the strainer basket to maintain pump prime and block air infiltration that can disrupt circulation. Molded from tough, transparent plastic, it lets you check debris levels at a glance without removing the lid. The convenient twist-lock design means you can take it...

Waterway Strainer Basket for SVL56 High Flow Pumps — Part 319-1310

Restore proper debris protection to your pump with the OEM Waterway 319-1310 Strainer Basket, purpose-built for SVL56 High-Flow pump models. This replacement basket sits inside the pump housing where it intercepts leaves, insects, and other particulates before they can compromise the impeller or internal seals. Constructed from materials that stand up to prolonged UV radiation and harsh pool chemistry, the 319-1310 maintains its structural integrity...

Waterway Pump Tailpiece for Mustang & SVL Series — 2" to 2.5" (400-5111)

Establish a rock-solid pump connection with the OEM Waterway Tailpiece Kit 400-5111, purpose-built for Waterway Mustang and SVL pump series. This versatile union tailpiece supports both 2-inch and 2.5-inch plumbing connections, giving you the flexibility to match your specific pipe configuration without sourcing additional adapters. The complete kit arrives with union nuts, gaskets, short couplers, and a long coupler — all the hardware required for...

Waterway Buttress Threaded Union Adapter for Executive Pump 2" x 2.5" — Part 415-6010

The Waterway 415-6010 Buttress Threaded Union Adapter is a 2-inch by 2.5-inch OEM connector precision-engineered to mate with Waterway Executive Pumps. Its buttress thread profile creates a powerful, watertight bond that ensures stable water movement through pool and spa plumbing networks. Fabricated from durable, corrosion-fighting materials, this union adapter is a strong choice for both initial installations and equipment servicing tasks. It streamlines system assembly...