Eeziblue Monthly Algaecide harnesses the proprietary Zn-Cu Synergy formula, a potent blend of copper and zinc that attacks algae at its source while simultaneously improving water clarity and lowering phosphate concentrations. This all-in-one pool treatment doubles as a bactericide and clarifier, functioning equally well in chlorine-treated and saltwater pools. One of its standout advantages is reducing chlorine demand by as much as 75%, translating to real chemical savings over the season. Eeziblue also builds resilience against sudden weather changes, cutting down on unexpected mid-cycle interventions. Each 14-ounce bag handles up to 13,000 gallons of pool water, converting green, murky conditions to clear when combined with properly balanced chemistry.

Key Benefits

• Zn-Cu Synergy® Formula: Leverages the combined strength of copper and zinc to destroy existing algae and block future outbreaks.
• Versatile Application: Works in both chlorine and saltwater pools, functioning as an algaecide, bactericide, phosphate remover, and water clarifier in a single treatment.
• Chlorine Reduction: Slashes chlorine demand by up to 75%, lowering chemical costs and creating a gentler swimming atmosphere.
• Simplified Maintenance: Boosts water transparency and filtration performance, making regular pool upkeep far less labor-intensive.

Specifications

• Brand: eeziblue
• Part Number: EB-MA-14OZ

Usage Directions

14oz of this product treats 6,500 to 13,000 gallons. For pools on the lower end of this range, use half of this product per month.

Application For Green To Clear1. Backwash pool for up to 2 minutes then rinse for 20 seconds, or clean filters before application.2. Check and adjust pH to between 6.8 and 7.43. Disconnect any automatic pool cleaners. With the pump running and multiport set to the filter position pour contents directly into pool skimmer.4. Add 2.2 lbs of chlorine shock per 13,000 gallons to the pool (if using Calcium Hypochlorite shock administer via the pool skimmer only).5. Run pump for 30 minutes, then return to normal cycle. No swimming, vacuuming, or brushing until pool clears. Expect pool to go cloudy within 30 minutes after application. This is normal and will clear shortly thereafter.6. Vacuum the resultant residue once the debris has settled.

Application For Monthly Maintenance1. Backwash pool for up to 2 minutes then rinse for 20 seconds, or clean filters before application.2. With the pump running and multiport set to the filter position, pour contents directly into the pool skimmer.3. Run the pool pump continuously for 30 minutes after application, then return pump to normal cycle.4. Repeat application monthly.

Pool Care GuidelinesMaintain pool chemistry:¥ Chlorine: 0.5 - 1.0 ppm¥ pH: 6.8 - 7.4¥ Alkalinity: 80 - 120 ppm¥ Cyanuric Acid: below 50 ppmEnsure your copper levels are at or below 0.2 pm before application. If the copper is higher than 0.2 pm then pause application until this threshold is reached. This scenario is common in low use pools or during winter monihs.If pool water discoloration occurs if is usually associated with extreme weather conditions (.e. lightning, rain, extreme heat) and or unexpected high bather loads - check your pH and free chlorine levels immediately and adjust if required, it may be necessary to so shock" your pool with additional chlorine.Saltwater pool application - normal application applies but be prepared to lower the output to maintain a new lower free chlorine reading to between 0.5 ppm and 1 ppm.For best results use Trichlor tablets with the Monthly Maintenance application.

SEO Tags

eeziblue eeziblue monthly algaecide & water clarifier
EB-MA-14OZ
eeziblue monthly algaecide water clarifier