SGM Dynamite Pool Patch (PLBPP3) is a 3 lb white repair mix formulated with Portland cement and special additives for fast underwater patching and concrete repair. This quick-setting material is ideal for sealing cracks, leaks, and structural imperfections where a rapid cure is essential. Designed for both above-ground and underwater applications, it can be mixed to a dough-like consistency and applied in minutes. Whether you need to stop a water leak or restore damaged pool concrete, Dynamite Pool Patch provides a durable, long-lasting repair solution.

• Instant Underwater Repairs: Specially formulated to set quickly underwater, making it ideal for sealing leaks and cracks in active pools without draining.

• Durable Cement-Based Blend: Made with Portland cement and proprietary additives that provide strong bonding and lasting structural integrity.

• Fast-Setting Application: Mixes to a workable dough-like consistency and sets firmly in just 3Ð5 minutes, minimizing downtime for critical repairs.

• Simple Surface Preparation: Requires only a clean, grease-free area with a chiseled V-channel and light dampening for best adhesion and performance.

• Versatile Repair Use: Works for underwater patching, above-ground concrete fixes, and as a quick-setting plug or caulking material in emergency situations.

Surface Preparation

The repair area must be clean and free of paint, sealer, dust, or grease. Chisel a V-shaped channel to allow easier application whenever possible. Dampen the area prior to application (when not underwater).

Mixing

Add approximately one part water to three parts Dynamite Pool Patch while stirring continuously until the material reaches a dough-like consistency.ÊWarning: warm water will accelerate the patchÕs set time. Mix only as much material as can be used within 3Ð5 minutes.

Application

Using a steel trowel or pointed tool, force the material into the hole or crack. To repair a water leak or for underwater use, apply pressure for at least 5 minutes or until the material has firmly set. Dampen the repair for 15 minutes after patching to prevent cracking.

Need help with SGM Dynamite Pool Patch (PLBPP3), the 3 lb white cement-based repair mix? This section covers preparation, application, and troubleshooting, with advice for confirming details when buying in store.

Preparing Surfaces for Pool Patch

Proper surface prep ensures long-lasting repairs. Cleaning and chiseling a V-shaped channel helps the patch bond securely to pool concrete.

How do I prepare cracks before applying Dynamite Pool Patch?

Why should I chisel a V-channel for best adhesion?

Can I buy the PLBPP3 pool patch in store today?

Do I need to dampen surfaces before application?

Mixing the Repair Material

The patch mixes one part water to three parts powder. Consistency should resemble dough, with warm water accelerating set time.

How much water should I add to Dynamite Pool Patch?

What happens if I use warm water when mixing PLBPP3?

Can store staff explain the right mixing ratio before purchase?

How long do I have to work with the mix before it hardens?

Applying the Patch in Pools

The material sets in 3Ð5 minutes, even underwater. Pressure is needed during curing to ensure a watertight seal.

How do I apply Dynamite Pool Patch to an underwater leak?

Why does my repair crack after hardening?

Should I keep pressure on the patch during curing?

Can store staff confirm if this is right for my repair project?