Installing the Stetson Float Valve into your Pouralid Water Level System or other water feature is refreshingly straightforward. Begin by applying Teflon tape to the threaded nipple, wrapping it around 5 to 6 times for a watertight seal, then simply thread the float valve into the water feature opening. For a snug fit, wrap the valve body in a soft cloth and hand-tighten. Orient the hood scoop facing downward with the float arm extending outward and upward. To set the initial water level, loosen the wing nut with your fingers and lift the float arm to the off position, then adjust the float bottle to the 8:00 or 9:00 o'clock position. Once filling stops, fine-tune by raising or lowering the float arm until the water reaches your preferred level, then secure everything by tightening the wing nut firmly.

Key Benefits

• Quick and Intuitive Setup: The Stetson Float Valve installs effortlessly into Pouralid Water Level Systems and compatible water features. Apply Teflon tape with 5 to 6 wraps around the threaded nipple, then thread the valve directly into place for a reliable, leak-proof connection.
• Secure Tightening Method: Achieve a firm, damage-free installation by wrapping the valve in a soft cloth before hand-tightening. Position the hood scoop downward and the float arm outward and upward to ensure proper valve operation.
• Precision Water Level Adjustment: Fine-tune your water level with ease by loosening the wing nut and moving the float arm to the off position. Set the float bottle at the 8:00 or 9:00 o'clock position for accurate, consistent water level regulation.
• Custom Water Level Calibration: After the initial fill cycle completes, simply raise or lower the float arm to dial in your exact preferred water height. Lock in the setting by tightening the wing nut, and the valve will automatically maintain that level going forward.

What's Included

• Pour-A-Lid 38AF Float

Specifications

• Brand: Pour-A-Lid
• Part Number: 38AF
• 3/8-inch MPT Threads Standard pipe thread inlet and free flow outlet Estimated flow rate of 1.5gpm at 40 PSI .093 orifice
• Approximate overall length of 7.5 ABS Construction with PVC Float
• Diameter of the Float: 2 Inch
• Overall Length of the entire float unit: 7-1/2 Inch

SEO Tags

pour-a-lid pour-a-lid plastic float for autofill water leveler
38AF
pour-a-lid plastic float autofill water