Pentair Seal Plate for Dyna Series Pool Pumps – C3-184P

Reinstate a watertight seal in your Sta-Rite Dyna-series pump with the genuine Pentair C3-184P Seal Plate. Engineered as a direct replacement for Dyna-Glas, Dyna-Max, Dyna-Wave, and Dyna-Jet pump models, this component forms the critical barrier between the wet end and motor housing to preserve system pressure and sustain efficient water circulation. With dimensions of 10-1/2 inches in length and width by 3 inches in height,...

Pentair Seal Plate Kit for Max-E-Glas & Dura-Glas Pool Pumps – C203-193

Eliminate leaks and restore airtight pump operation with the genuine Pentair C203-193P Seal Plate Kit, a comprehensive replacement set for Pentair Sta-Rite Max-E-Glas and Dura-Glas inground pool and spa pumps. Bundling a seal plate, shaft seal, and seal plate O-ring into one convenient package, this kit addresses every sealing surface at once. Compatible with both full-rate and up-rate pump variants, it provides a complete solution...

Pentair Shaft Seal for C & EQ Series Pool Pumps - Part 071725S

Built to factory-original standards, the Pentair 071725S Shaft Seal delivers dependable protection for C and EQ Series commercial pool pumps. This critical sealing component sits along the pump shaft to guard against water leakage that could compromise motor integrity and system pressure. Its construction combines ceramic and stainless steel elements to withstand the demanding thermal, chemical, and mechanical loads common in commercial aquatic facilities. Whether...

Pentair Short Leader Hose for Rebel & SandShark Cleaners | GW7911

The genuine Pentair GW7911 is a 12-inch short leader hose replacement crafted for Kreepy Krauly SandShark and Rebel automatic pool cleaners. This hose serves as the vital link between the cleaner head and the main hose assembly, ensuring uninterrupted suction flow for effective debris removal. Made from reinforced, flexible material, it resists the wear and degradation caused by constant underwater movement and pool chemical exposure....

Pentair Skimmer Basket for B203 & SP-1094-FA | R38014

The Pentair R38014 is a genuine OEM replacement skimmer basket that pairs directly with Hayward SP-1094-FA and Aladdin B-203 skimmer and pump pot assemblies. Measuring 5.25 inches across and standing 3 inches tall, this compact yet effective basket captures leaves, insects, and other waterborne debris before they can obstruct your filtration system. Constructed from premium-grade materials formulated to withstand prolonged chemical contact and repeated handling,...

Pentair Skimmer Deck Lid for Sta-Rite U-3 Pool Skimmers - Part 08650-0058

Restore the protective cover on your skimmer with the genuine Pentair 08650-0058 Skimmer Lid, a white replacement designed exclusively for Sta-Rite U-3 skimmers. Spanning approximately 9-13/16 inches in diameter, it seats firmly over the skimmer opening to shield internal components from leaves, dirt, and other unwanted material while still providing convenient access for routine cleaning and inspection. Constructed from resilient plastic that holds up against...

Pentair Slide Valve Backwash Piston Shaft Replacement | 263055 | Swimables SW-26-055

The Swimables SW-26-055 Piston Shaft provides a dependable replacement for the Pentair 263055 component, purpose-built for Pentair 2-inch Slide Valves. This shaft is at the heart of your backwash system, facilitating precise water flow control during filter cleaning cycles. Its tough construction handles the repeated mechanical stress of valve operation without degradation, helping your filtration equipment deliver reliable results for years. Dropping in this replacement...

Pentair Slide Valve Plastic Shaft Handle Replacement | 273089 | SW-26-089 by Swimables

Bring your Pentair backwash valve back to full working order with the Swimables Plastic Shaft Tee Handle SW-26-089. This T-style handle is manufactured as a precise drop-in replacement for the Pentair 273089 and is built to work with Pentair 2-inch PVC slide multiport valves, including models 261047 and 261165. Molded from tough black plastic that resists UV exposure and chemical attack, it features a 5/8-inch...

Pentair SM & SMBW 2000/4000 DE Filter Holding Wheel - Part 071019Z

The Pentair 071019Z holding wheel is a genuine OEM component designed for Pentair SM and SMBW 2000 and 4000 series DE filters. This essential hardware piece secures the filter internals in their correct position, ensuring that the diatomaceous earth grids stay properly aligned and seated during operation. Manufactured from sturdy, pool-grade materials, the holding wheel resists warping and chemical deterioration even after prolonged immersion in...

Pentair SM & SMBW 4000/4048 Filter Tank Lid — Part 197136

Replace your worn or damaged filter lid with the genuine OEM Pentair 197136 Tank Lid, designed to fit SM and SMBW 4000/4048 filters along with CFM fiberglass cartridge filter models such as the CFM 315. Manufactured from heavy-duty, long-wearing materials, this lid forms a dependable seal that guards against leaks and upholds the structural soundness of your filter housing. The package arrives complete with a...

Pentair SpaBrite Wire Clamp Assembly for Spa Lights | Part 79210400

Keep your spa light fixture sealed and secure with the Pentair 79210400 Wire Clamp Assembly. This genuine OEM stainless steel component holds the lens and gasket firmly in place on Pentair spa light fixtures, maintaining a watertight enclosure that protects internal electrical parts. The unitension design with a welded nut delivers consistent clamping force, ensuring the seal stays intact through daily operation and temperature changes....

Pentair Sta-Rite 6-Position Valve Top Assembly — Part 272568Z

The genuine Pentair 272568Z Valve Top Assembly is a factory-direct replacement for Sta-Rite 6-position top mount clamp-on multiport valves. Crafted from corrosion-resistant materials, this assembly withstands the punishing conditions of outdoor pool installations while preserving long-term operational dependability. It restores complete six-position functionality — filter, backwash, rinse, recirculate, waste, and closed — giving you precise command over every stage of your filtration cycle. Sized for...

Pentair Sta-Rite Max-E-Therm Heater Display Cover by Swimables | 42001-0008S | SW-41-008

Shield your heater's control interface with the Swimables Display Cover, model SW-41-008, a resilient replacement component crafted for Sta-Rite Max-E-Therm Heaters. Engineered for effortless installation, this protective cover guards the control panel against rain, sun, debris, and other outdoor hazards while keeping the display easily readable for convenient day-to-day operation. Produced from premium-quality materials, it helps preserve the longevity of your heater by safeguarding delicate...

Pentair Sta-Rite PLM100 Filter Module Cartridge — Part 27002-0100S

The Pentair 27002-0100S Filter Module is the factory-authorized OEM cartridge replacement for the Sta-Rite System 2 Modular Media Filter, Model PLM100. With 100 square feet of high-grade pleated filtration media, a height of 18-1/4" and a diameter of 13", this cartridge provides outstanding particle capture and debris-loading capacity — holding up to 15 times more contaminants than a comparably sized sand filter. Its shallow-pleat construction...

Pentair Sta-Rite Pump Impeller C105-238PDBA | 1.5HP Full Rate / 2HP Up Rate

The Pentair C105-238PDBA is a genuine OEM impeller built to deliver peak hydraulic output in Sta-Rite pool and spa pumps. Specifically sized for Max-E-Pro, Max-E-Glas II, and Dura-Glas II models, it accommodates both 1.5 HP full-rated and 2 HP up-rated motor configurations. This impeller generates the water velocity your system needs for consistent filtration and thorough circulation. Fabricated from industrial-strength materials that stand up to...

Pentair Sta-Rite S8D110 Filter Manifold | Part 24801-0101

The Pentair 24801-0101 Manifold is an OEM replacement component purpose-built for the Sta-Rite System 3 SD-Series D.E. filter, model S8D110. This manifold is central to achieving crystal-clear water, as it anchors the D.E. filter elements firmly in their correct positions to guarantee uniform water distribution and peak filtration output. Suitable for both residential pools and commercial aquatic facilities, it delivers dependable performance even under heavy...

Pentair Sta-Rite SunLite Lens Gasket — Replacement Part 05601-0014

Protect your underwater lighting investment with the Pentair 05601-0014 lens gasket, an original equipment replacement part built for Sta-Rite SunLite pool and spa light fixtures. This gasket sits between the lens cover and the fixture housing, forming a watertight barrier that shields sensitive electrical components from moisture intrusion. Crafted from resilient, pool-grade rubber, it holds up against constant chlorine contact, elevated water temperatures, and hydrostatic...

Pentair Sta-Rite System 3 Pool Filter Clamp Bolt | Part 24850-0010

The Pentair 24850-0010 Clamp Bolt is a genuine OEM replacement designed for Sta-Rite System:3 modular media and D.E. filter lines, covering SM, SMD, SD, and SS series units. This bolt is critical for securing the filter tank halves together, ensuring safe pressurization and dependable filtration. Manufactured to withstand the corrosive conditions found in pool equipment environments, it provides consistent holding strength throughout its service life....

Pentair Sta-Rite U-3 White Pool Skimmer with 2" Plumbing - Part 08650-1404

Equip your inground pool with the genuine Pentair Sta-Rite U-3 Skimmer 08650-1404, a full-size skimmer body molded from white ABS plastic for exceptional strength and chemical resistance. This high-performance unit intercepts leaves, bugs, and other surface debris before they can travel to your pump and filter, protecting equipment and promoting clearer water. Its versatile manifold accepts 1_" or 2" threaded connections as well as 1_"...

Pentair Stainless Steel Face Ring Assembly for Large Pool Lights | Part 79110600

Give your pool lighting a clean, finished appearance with the genuine Pentair Stainless Steel Face Ring Assembly 79110600. This OEM replacement part is built to fit multiple Pentair light series, including IntelliBrite, Amerlite, AmerQuartz, and Spectrum Amerlite fixtures. Fabricated from high-grade stainless steel, the face ring resists corrosion from pool chemicals, UV radiation, and physical wear—making it equally suited for residential backyard pools and high-traffic...