Pentair SuperFlo VST Pump Diffuser — Part 355949

The Pentair 355949 Diffuser is a genuine OEM replacement component built for SuperFlo Variable Speed Pumps manufactured after 6/17/19. This diffuser channels water flow efficiently through the pump assembly, promoting smooth operation and reliable filtration output. Made from durable, pool-grade materials, it withstands the demands of continuous operation and ongoing chemical exposure. Installing a new diffuser when the original becomes worn or damaged restores proper...

Pentair SuperFlo VST Pump Housing Volute | 350089

Restore full pump performance with the Pentair 350089 Housing Volute, a genuine OEM replacement component for SuperFlo, SuperFlo VS, and SuperFlo VST inground pool and spa pumps. The volute housing is central to directing water through the pump chamber, and a worn or cracked unit can lead to reduced flow, increased energy consumption, and potential system damage. This factory-specification part is produced from high-strength, pool-grade...

Pentair SuperFlo VST Pump Seal Plate — Part 356071

The Pentair 356071 Seal Plate is a genuine OEM replacement part built for SuperFlo VST pumps manufactured after 6/17/19. This seal plate establishes a secure, watertight connection within the pump assembly, guarding against leaks and supporting efficient pump operation. As a vital structural element, it upholds the integrity of the pump housing and ensures dependable, long-term service. Fabricated from durable, pool-grade materials, the 356071 resists...

Pentair SuperMax & SuperFlo Pump Diffuser O-Ring by Aladdin | 355030 | O-395

The Aladdin O-395 Diffuser O-Ring is an essential sealing gasket engineered for Pentair SuperMax and SuperFlo pump systems. Positioned between the diffuser and pump volute, it locks out internal water bypass to preserve full suction force and pressure output. Crafted from a robust, chemically resistant elastomer, the O-395 handles continuous duty in chlorinated environments and delivers consistent seal integrity across extended service intervals. Key Benefits...

Pentair SuperMax & SuperFlo Pump Lid O-Ring by Aladdin | 357255 | O-150

Eliminate lid leaks on your Pentair pool pump with the Aladdin O-150 Lid O-Ring, precision-crafted to fit SuperMax and SuperFlo models. This dependable sealing component locks the pump lid in place with a firm, gap-free connection that blocks water seepage and air infiltration. Produced from resilient, chemical-resistant material, the O-150 stands up to repeated lid removals and prolonged exposure to treated water, making it a...

Pentair SuperMax & SuperFlo Seal Plate O-Ring | Aladdin O-465 | 355619

The Aladdin O-465 Seal Plate O-Ring is a key replacement part engineered for Pentair SuperMax and SuperFlo pump lines. By forming a firm, watertight bond at the seal plate and bracket junction, this O-ring guards against drips and seepage while keeping pump output at its best. Produced from premium, wear-resistant material, it stands up to continuous chemical contact and mechanical stress. Whether you are performing...

Pentair SuperMax & SuperFlo Seal Plate O-Ring — Part 355619

The Pentair 355619 Seal Plate/Seal Bracket O-Ring is a genuine OEM component engineered for SuperMax and SuperFlo Pumps. This O-ring delivers a firm, leak-proof seal at the seal plate and bracket junction, protecting your pump from water loss and preserving operational efficiency. Produced from premium, long-wearing materials, it provides outstanding resistance to degradation from pool chemicals and mechanical stress. An essential item for scheduled maintenance...

Pentair Swimquip U-3 Skimmer Lid in Gray — 08650-0058C | SW-93-214

Keep your Pentair SwimQuip¨ U-3 skimmer fully protected with the Swimables SW-93-214 replacement lid in gray. Engineered as a drop-in substitute for OEM part number 08650-0058, this cover is manufactured from resilient, outdoor-grade materials that stand up to sun, rain, and seasonal temperature swings. The lid seats firmly onto the skimmer housing, forming a tight closure that blocks leaves, insects, and other unwanted material from...

Pentair Swimquip U-3 Skimmer Lid in Tan — 08650-0158 | SW-93-215

Restore the protective seal on your Pentair SwimQuip U-3 skimmer with the Swimables SW-93-215 replacement lid in tan. This cover is purpose-built to take the place of OEM part number 08650-0158, delivering a factory-level fit right out of the box. Formed from heavy-duty, weather-resistant material, the tan lid stands up to prolonged outdoor exposure without warping, discoloring, or becoming brittle. Once installed, it locks securely...

Pentair Swimquip U-3 Skimmer Lid in White — 08650-0058 | SW-93-213

The Swimables SW-93-213 white skimmer lid provides a reliable, long-lasting cover for Pentair SwimQuip¨ U-3 skimmers. Built as an exact-fit alternative to OEM part number 08650-0058, this lid snaps into position on the original housing without any modification or special tools. Its rugged, weather-proof construction handles constant sun exposure, heavy rain, and freezing temperatures without deteriorating. Once in place, the lid forms a dependable barrier...

Pentair Switch Membrane for Max-E-Therm & MasterTemp Heaters — Part 42002-0029Z

The Pentair Switch Membrane 42002-0029Z is a genuine replacement component engineered for Sta-Rite Max-E-Therm and Pentair MasterTemp pool and spa heaters. Functioning as the main user-facing interface on the heater control panel, this membrane delivers precise input recognition and seamless navigation through all heater settings. Each button is distinctly labeled and tactile, providing dependable control even after years of regular use. Built to genuine Pentair...

Pentair System 3 Filter Clamp Assembly | Part 24850-0200

The Pentair 24850-0200 Clamp Assembly is a factory-original component engineered to hold together the tank halves on Sta-Rite System 3 filter models, including S7M120, S7M400, S8M150, S8M500, S7D75, S8D110, S7S50, and S8S70. This robust assembly creates a pressure-tight bond between the upper and lower sections of the filter housing, delivering leak-free operation and safe pressure containment. Constructed from high-strength thermoplastic paired with corrosion-resistant stainless steel...

Pentair System 3 Pool Filter Drain Plug | Part 24900-0503

The Pentair 24900-0503 Drain Plug is a genuine OEM part engineered for Sta-Rite System 3 filters, providing a reliable drainage point for removing sand, water, and accumulated debris from the filter tank. Built to facilitate both routine servicing and seasonal winterization tasks, this plug seats securely in compatible models such as S7M120, S8M500, and S7S50. Its heavy-duty construction delivers outstanding resistance to pool treatment chemicals,...

Pentair Tagelus & Sand Dollar Filter Lateral — Part 155007

The Pentair 155007 Lateral is a factory-original replacement component that plays a central role in maintaining effective water filtration within Pentair Sand Dollar and Tagelus sand filter systems. Precision-engineered for reliable performance, this lateral channels water uniformly across the sand bed, capturing particulate matter while allowing filtered water to return to your pool. It is designed for use with the Sand Dollar SD35 and Tagelus...

Pentair Tagelus & Triton Sand Filter Lateral — Part 152202

The Pentair 152202 Filter Lateral is an expertly crafted replacement part designed for dependable, high-efficiency performance inside sand filter systems. This lateral measures 9-1/8 inches in length with a 1-15/16-inch diameter and features a 1-1/4 MPT threaded fitting, enabling thorough water distribution across the entire sand bed. It pairs seamlessly with a broad selection of Pentair filters—including Tagelus (TA100, TA100D) and Triton models (TR100, TR100C,...

Pentair Tagelus Sand Filter 6-Position Top Mount Multiport Valve | 1.5" | Part 262506

The Pentair 262506 is a 1.5-inch, six-position top mount multiport valve engineered to regulate water flow through Pentair Tagelus sand filters and select Pac-Fab filtration systems. Its body is molded from corrosion-resistant ABS plastic and houses a heavy-duty diverter for sustained reliability in chemically demanding pool environments. A single oversized handle lets operators cycle through all filtration modes -- including standard filtering, backwashing, rinsing, and...

Pentair Tagelus Sand Filter Valve Band Clamp — Part 152130

The OEM Pentair Valve Band Clamp 152130 is an essential replacement part that anchors the valve firmly to the filter tank on Pentair Tagelus sand filters. Built to serve models such as TA100 and TA100D, this clamp features an 8.35-inch diameter sized for 2-inch multiport top and side mount valves. Its firm grip on the valve-to-filter connection preserves a watertight bond, which is crucial for...

Pentair Tan Leveler Lid for Automatic Pool Water Levelers — T10B

Keep your Pentair automatic water leveler system properly sealed with the genuine T10B replacement lid. Crafted in a buff (tan) tone, this autofill cover integrates seamlessly with a variety of pool deck color schemes. It serves as a protective barrier for the internal leveler mechanism, ensuring uninterrupted water regulation in both pools and spas. Engineered from resilient materials, the T10B stands up to prolonged sun,...

Pentair Tan Lid and Collar for U-3 Pool Skimmers - Part 08650-0159

Upgrade your skimmer's top assembly with the genuine Pentair 08650-0159 Lid and Collar Set, a tan-colored OEM replacement crafted for Sta-Rite U-3 inground pool and spa skimmers. Measuring 10.5 inches wide and 2 inches tall, this set locks securely into position over the skimmer opening to prevent large debris from entering the housing. Built from weather-tough materials that shrug off sun, rain, and poolside foot...

Pentair Thermistor Defrost Sensor Probe for UltraTemp Heat Pumps - Part 473665

Keep your heat pump running efficiently in cooler weather with the Pentair 473665 Thermistor Defrost Sensor Probe, a genuine OEM replacement component designed for ThermalFlo Titanium and UltraTemp heat pumps. At 53.5 inches in length, this probe reaches the optimal sensing position within the unit to deliver accurate, real-time temperature data that drives the automatic defrost cycle. When outdoor temperatures drop, frost can accumulate on...