Pentair Stainless Steel Face Ring for SpaBrite & AquaLite Spa Lights | Part 79111600Z

Upgrade the protection and appearance of your spa lights with the genuine Pentair 79111600Z Stainless Steel Face Ring. This OEM replacement component is designed to fit Pentair SpaBrite, AquaLight, and IntelliBrite_5G spa light fixtures. The ring mounts directly over the light lens, serving the dual purpose of safeguarding the fixture from physical damage and providing an attractive, polished trim. Constructed from premium stainless steel, it...

Pentair Stainless Steel Niche Sealing Ring for Pool Lights | Part 79206000

Protect your pool lighting from water intrusion with the genuine Pentair 79206000 Sealing Ring. This OEM replacement component is specifically manufactured for Pentair small stainless steel niches, forming a tight barrier between the niche body and the pool light to keep moisture away from electrical connections. Its six-hole mounting pattern ensures evenly distributed clamping pressure for a uniform, gap-free seal. Well suited for vinyl liner...

Pentair StarGuard 8" Main Drain Cover with Long Ring — Part 500108

The genuine Pentair StarGuard Main Drain Cover with Long Ring 500108 is an 8-inch round safety drain cover engineered for in-ground pool and spa installations. Fully compliant with the Virginia Graeme Baker Pool & Spa Safety Act, it delivers the certified protection and dependable performance that commercial and residential pools require. With 15.35 square inches of open area, this cover accommodates flow rates up to...

Pentair StarGuard 8" Main Drain Cover with Short Ring — Part 500103

The genuine Pentair StarGuard Main Drain Cover with Short Ring 500103 is an 8-inch round safety cover built for in-ground pool and spa applications. Engineered in full compliance with the Virginia Graeme Baker Pool & Spa Safety Act, it provides the protection and reliability demanded in aquatic environments. Featuring 15.35 square inches of open area, this cover supports flow rates up to 144 GPM when...

Pentair Strainer Basket C108-33PZ | Fits Max-E-Glas & Dura-Glas Pumps

Protect the internal components of your Pentair Sta-Rite Max-E-Glas or Dura-Glas pump with the C108-33PZ basket strainer. This 5-inch OEM replacement intercepts leaves, insects, and other waterborne debris before they can reach the impeller and cause damage or blockages. Constructed from corrosion-proof, high-flow material that resists warping and cracking in chemically treated water, the C108-33PZ is fundamental to preserving pump health and sustaining uninterrupted water...

Pentair Strainer Basket for AquaFlo & Premier Pumps | R38004

The Pentair R38004 is a factory-original 5-inch replacement basket engineered for skimmer wells and pump pots across a range of popular pool pump lines, including AquaFlo, Marine, Premier, Universal, and Sta-Rite. Its primary function is to intercept leaves, twigs, and other waterborne debris before they can reach the pump impeller, safeguarding your filtration hardware and prolonging the operational life of your equipment. With a universally...

Pentair Strainer Basket for Max-E-Glas II C8-58P Pumps | R38006

The Pentair R38006 is a genuine OEM replacement basket purpose-built for the Sta-Rite Max-E-Glas II pump, model C8-58P. Engineered to trap leaves, twigs, insects, and other waterborne contaminants before they contact the impeller, this basket plays a vital role in preserving consistent water circulation and safeguarding your pump internals. Its rugged construction is formulated to resist degradation from prolonged chemical exposure and repeated cleaning cycles....

Pentair Strainer Pot & Skimmer O-Ring - Aladdin O-301 | 355330

The Aladdin O-301 is a premium replacement O-Ring built for Pentair pool equipment, serving as a drop-in substitute for Pentair part number 355330. With a 2-1/2 inch inner diameter and a 1/8-inch cross-section, this gasket creates a dependable, leak-resistant seal that maintains your system's hydraulic efficiency. It works across a broad range of Pentair products, including Tagelus sand filters, Challenger high flow and high pressure...

Pentair Strainer Trap Body for Dura-Glas, Max-E-Glas & JWP Pumps – C153-53P1

Safeguard your pool pump's internals with the genuine Pentair Strainer Trap Body C153-53P1, a factory-spec replacement housing built for Sta-Rite Dura-Glas, Max-E-Glas, and JWP pool pumps. This 5-inch trap body acts as the containment chamber for the strainer basket, intercepting leaves, dirt, and other debris before they can reach the impeller or motor. Constructed from heavy-duty materials to withstand the rigors of both residential and...

Pentair SuperFlo & Challenger Pump Diffuser O-Ring | 355331

The Pentair 355331 Diffuser O-Ring is a genuine OEM replacement component made for SuperFlo VS/VST and Challenger pumps produced after 6/17/19. This O-ring forms a secure, watertight barrier inside the pump diffuser, preventing leaks that can undermine water flow and reduce system efficiency. Manufactured from resilient, chemically resistant rubber, it withstands prolonged contact with treated pool water without losing its sealing properties. As a fundamental...

Pentair SuperFlo & Pinnacle Seal Plate Replacement | 356012 | Swimables SW-21-012

Restore a factory-tight seal between your pump motor and wet end with the Swimables SW-21-012 Seal Plate, machined to serve as a precise drop-in replacement for Pentair part 356012. This critical component forms the barrier that keeps pool water on the volute side and away from the motor, preventing costly leaks and premature motor failure. Molded from rigid, chemical-resistant material, it maintains dimensional stability even...

Pentair SuperFlo & SuperMax 1.1HP Pump Diffuser — Part 356358Z

Keep your pool pump running at its best with the genuine Pentair 356358Z Diffuser, a factory-spec replacement component engineered for Pentair SuperFlo and Sta-Rite SuperMax pump systems. This diffuser enhances internal hydraulic flow by directing water through balanced channels, which minimizes energy consumption and reduces mechanical stress on the motor. Built for 1.1 THP configurations, it is a critical component for sustaining effective water circulation....

Pentair Superflo & SuperMax Pump Lid Replacement | 350091 | Swimables SW-21-091

Restore a tight, leak-free closure on your Pentair pool pump with the Swimables SW-21-091 Replacement Pump Lid. Engineered as a direct-fit replacement for Pentair SuperFlo, SuperFlo VS/VST, SuperMax, and SuperMax VS inground pool and spa pumps, this lid eliminates water and air leaks that can rob your pump of suction power. The crystal-clear plastic construction lets you visually inspect the strainer basket at a glance...

Pentair SuperFlo & SuperMax Pump Replacement Basket | 355667 | Swimables SW-90-667

The Swimables SW-90-667 pump basket is your go-to replacement for keeping SuperFlo and SuperMax pump systems running without interruption. This hardworking basket sits inside the pump strainer housing, catching leaves, insects, pebbles, and other waterborne debris before they can interfere with the impeller or downstream filtration. Its reinforced construction resists the warping and cracking that lesser baskets suffer under constant chemical exposure and water pressure....

Pentair SuperFlo & SuperMax Pump Union 1.5"-2" by Swimables — 350157 | SW-21-350

Achieve a watertight, professional-grade plumbing connection on your Pentair SuperFlo or SuperMax pump with the Swimables SW-21-350 Union Kit. Serving as a direct stand-in for Pentair part 350157, this kit ships with two unions featuring a 1.5-inch internal slip and a 2-inch external slip, along with matching adaptors, threaded nuts, and fresh O-rings. Every piece is precision-molded to match factory tolerances, so you get a...

Pentair SuperFlo Pump Impeller C105-238PDCA | OEM Replacement Part

The Pentair C105-238PDCA is an authentic OEM impeller that fits SuperFlo, SuperFlo VS, SuperFlo VST, SuperMax, and Sta-Rite Max-E-Pro pumps manufactured after 6/17/19. As the heart of your pump's hydraulic system, this impeller maintains the water velocity required for effective filtration and dependable pool circulation. Produced from OEM-grade materials that resist chemical corrosion and daily operational stress, it delivers long service life in demanding aquatic...

Pentair SuperFlo Pump Nut Replacement 350092 | Swimables SW-21-092

The Swimables Nut for SuperFlo Pumps SW-21-092 is a key replacement component engineered to firmly fasten the union assembly on SuperFlo pump systems. This nut is critical for creating a snug, drip-free junction between pump components, which directly impacts how efficiently your entire filtration system performs. Built from tough, corrosion-resistant materials, the SW-21-092 is designed to hold up under the continuous operation and chemical exposure...

Pentair SuperFlo Pump Nut Replacement | 350092

The Pentair 350092 Nut is a factory-original replacement part built for SuperFlo and SuperFlo VST pumps. This union nut forms the connection point that keeps the pump assembly sealed and free from water loss, ensuring steady hydraulic performance throughout the system. Manufactured from robust, pool-grade materials, it withstands prolonged contact with treated water and pool chemicals without weakening or corroding. Though small in size, this...

Pentair SuperFlo Pump Seal Kit GO-KIT78-9 | Super-Pro GO-KIT78-9 Shaft Seal & O-Ring Kit

Product Description The Pentair SuperFlo Pump Seal Kit GO-KIT78-9 is a high-quality pump seal and O-ring replacement kit designed to restore proper sealing and performance in Pentair SuperFlo pool pumps. Manufactured by Super-Pro, this kit includes essential sealing components to prevent leaks and maintain optimal pump operation. This complete pool pump seal kit helps eliminate water and air leaks that can reduce efficiency, cause priming issues,...

Pentair SuperFlo Pump Volute Assembly — Part 353010

Replace the entire front end of your SuperFlo pump in one step with the genuine Pentair Volute Assembly, part number 353010. This comprehensive assembly includes the volute housing, strainer lid, lid O-ring, basket, lid clamp, and drain plugs with O-rings -- everything needed to restore proper water flow and suction to your pump. Precision-molded for an exact factory fit, it channels water through the impeller...