Pentair Thermostat Circuit Board | MiniMax & PowerMax Heater Replacement | 470179

Keep your pool or spa heater running at peak efficiency with the Pentair 470179 Thermostat Circuit Board, a genuine OEM electronic component engineered for the MiniMax, MiniMax Plus, and PowerMax series of heaters. This board serves as the central temperature management hub, continuously monitoring and adjusting water heat levels to deliver the comfort you expect from your heating system. It supports an extensive lineup of...

Pentair Trap Cover Lid for Sta-Rite Pool Pumps – C3-185

Shield your pump's strainer basket with the genuine Pentair Trap Cover Lid C3-185P, a rugged replacement cap built for Sta-Rite pool and spa pump models. This lid secures the suction trap opening, blocking leaves and debris from entering the basket housing so your pump can circulate water freely and efficiently. Sized at approximately 7.125 inches in both length and width with a 3.5-inch height, it...

Pentair Trimmer Plate for Sta-Rite U-3 Pool Skimmers - Part 08650-0048

Keep your skimmer running at full capacity with the genuine Pentair 08650-0048 Trimmer Plate, a factory-spec replacement for Sta-Rite U-3 pool and spa skimmers. Also known as an equalizer flap, this component governs how water enters the skimmer body, ensuring debris is guided directly into the basket rather than slipping past it. Manufactured from robust, pool-rated materials, it stands up to prolonged chemical contact and...

Pentair Triton & Tagelus Sand Filter Drain Assembly — Part 152220Z

The OEM Pentair Sand Drain Kit 152220Z is a purpose-built component that makes draining water and sand from Triton and Tagelus filter models quick and efficient during scheduled service intervals. Designed for an exact fit, this kit enables thorough filter emptying to support hassle-free maintenance, deeper cleaning, and lasting filter performance. Made from tough, corrosion-resistant materials, it provides exceptional durability even under the most challenging...

Pentair Triton Filter 6" Black Buttress Threaded Closure Kit — Part 154641

The OEM Pentair Black Buttress Threaded Closure Kit 154641 is a 6-inch replacement assembly designed for Triton II pool and spa sand filters. This complete kit delivers a secure, leak-proof seal on the filter lid—an essential requirement for maintaining proper pressure and safe operation. The package contains a closure lid, air bleed valve, pressure gauge, lid O-ring, and all required hardware for a full installation....

Pentair Triton Filter 8.5" Closure Lid — Part 154575

The OEM Pentair Closure 154575 is an 8.5-inch replacement lid built for select Triton sand filter models, delivering a snug, reliable seal that stops leaks and sustains proper system pressure. This component is key to preserving your filtration system’s structural soundness, ensuring steady and efficient filter performance day after day. Made from durable materials, this closure is designed to handle the rigors of continuous pool...

Pentair Triton Filter Black Buttress Threaded Closure Kit — Part 154856Z

The Pentair 154856 Black Buttress Threaded Closure Kit is a factory-original replacement package engineered for Triton II sand filters. This comprehensive assembly restores a secure, watertight seal at the filter lid position, safeguarding internal components and maintaining proper operating pressure. With an 8.5-inch diameter closure lid, the kit ships complete with an air relief valve, PSI gauge, lock nut, lid O-ring, and lid wrench. Each...

Pentair Triton II & C-3 Filter 1/4" Air Relief Strainer — Part 154578

The OEM Pentair Air Relief Strainer 154578 is a precisely engineered 1/4-inch replacement component for Pentair Triton II and Triton C-3 pool and spa sand filters. With a 1-1/4-inch diameter, this part ensures effective air venting within the filtration system by allowing excess trapped air to release. This action preserves ideal internal pressure levels and guards against system stress caused by air pockets. Constructed for...

Pentair Triton II & System 3 Filter Air Bleeder Tee — Part 154689Z

The OEM Pentair Air Bleeder Tee 154689Z is an essential air management fitting designed for Triton II and System 3 pool and spa filter systems. This tee assembly enables the controlled release of trapped air from within the filter tank, helping to stabilize internal pressure and keep the system running efficiently. Effective air bleeding prevents potential component damage from air accumulation and promotes reliable filtration...

Pentair Triton II & System 3 SS Air Bleeder Tee 154689Z by Swimables | SW-26-689

The Swimables SW-26-689 Air Bleeder Tee is a dependable aftermarket replacement for Pentair part number 154689Z, purpose-built for Pentair Triton II and Sta-Rite System 3 SS sand filters. This small but essential fitting provides a pathway for trapped air to exit the filter tank, preventing pressure imbalances that can hamper water flow and reduce filtration effectiveness. Manufactured from robust, corrosion-resistant materials, the SW-26-689 stands up...

Pentair Triton II & Tagelus Filter Closure Wrench — Part 154512

The OEM Pentair Closure Wrench 154512 is a 6-inch plastic tool specifically built for opening and securing closures on Pentair Triton II and Tagelus pool filters. It works with models including TA30D, TA40D, TA50D, TA60D, TR40, TR50, and TR100, and is shaped to deliver a snug, reliable grip on both top and side-mount valve closures. Constructed from sturdy plastic, this wrench is designed for repeated...

Pentair Triton II 6" V-Threaded Filter Closure (Tan) — Part 154559

The OEM Pentair V Threaded Closure 154559 is a 6-inch tan replacement lid designed specifically for Pentair Triton II sand filters. This closure delivers a firm, leak-resistant seal that is critical for preserving proper operating pressure and ensuring peak filter performance. Built from heavy-duty materials, it is made to hold up against the demanding conditions found in pool environments and the stresses of regular maintenance...

Pentair Triton II Filter 2" Bulkhead Kit — Part 154714

The Pentair 154714 Bulkhead Kit is a 2-inch factory-original replacement package built for Triton II sand filters, covering models TR40, TR50, TR60, TR100, and TR140. This OEM-grade assembly establishes a secure, leak-resistant junction between the filter tank and your plumbing infrastructure, preserving optimal filtration under pressurized operating conditions. Every component required for a professional-quality seal is included: bulkhead body, locknut, internal spacer, external spacer, O-ring,...

Pentair Triton II Sand Filter Diffuser Assembly — Part 154599

The OEM Pentair Diffuser Assembly 154599 is a core component for Triton II and Triton C-3 sand filters, engineered to spread incoming water evenly over the sand bed for maximum filtration efficiency. This balanced distribution prevents channeling—a condition that can erode performance and reduce water clarity over time. By encouraging uniform sand bed utilization, the diffuser also prolongs the life of your filtration media and...

Pentair U-3 Skimmer Weir Gate (White) — Part 08650-0022

Keep your Sta-Rite/SwimQuip U-3 skimmer operating at peak capacity with the genuine Pentair Weir Gate 08650-0022. This white hinged weir assembly measures 8.5 inches long by 5.125 inches wide and serves as the critical component that channels surface water into the skimmer basket while containing floating debris for effective filtration. Built with an integrated plastic hinge engineered for continuous pool-environment exposure, this replacement gate delivers...

Pentair Union Body 1.5" x 2" Black | 87202211

The Pentair 87202200 Union Body is designed for 1.5" x 2" plumbing connections in pool and spa systems, offering a solid and serviceable junction point. This union body allows plumbing to be separated without sawing through pipes, streamlining equipment servicing and component swaps. Its rugged construction guarantees a drip-free seal between connected parts and works across a variety of Pentair filtration configurations. Engineered to withstand...

Pentair Union Nut C-Clip Retainer for Pool Filters | 39104500

Maintain a solid, leak-free filter connection with the genuine Pentair Union Nut C Clip 39104500. Though compact in size, this OEM retaining clip plays a vital role in anchoring the union nut to the filter body on a broad range of Pentair systems, including Clean & Clear, Predator, Warrior, EasyClean, and EasyClean D.E. models. By locking the union nut securely in position, it prevents loosening...

Pentair Union Swivel Body for Clean and Clear Filters | 79304600

Restore leak-free plumbing connections on your Pentair filter with the genuine Pentair 79304600Z Union Swivel Body. This OEM replacement part serves as a union tailpiece for Pentair cartridge filter systems, including Clean & Clear, Predator, Warrior, and EasyClean models. Despite the name, this component functions as a fixed union body rather than a rotating joint, delivering a solid, watertight plumbing connection. Measuring approximately 3 inches...

Pentair Vac Plus II Skimmer Plate for Kreepy Krauly Cleaners - K12068

Restore full cleaning capability to your Kreepy Krauly Automatic Pool Cleaner with the Pentair K12068 Vac Plus II Plate Assembly. This 7-1/4-inch replacement component is precision-engineered to sustain proper suction levels and unhindered mobility, allowing your cleaner to efficiently sweep debris from every pool surface. Manufactured from premium-grade materials for extended service life, this plate assembly delivers dependable results cycle after cycle. Periodic inspection and...

Pentair Vac-Mate Long Retainer Bar Replacement | R36033

Keep your Vac-Mate vacuum attachment firmly anchored during every cleaning session with the genuine Pentair R36033 Long Retainer Bar. This factory-original component is engineered exclusively for the Pentair Vac-Mate model 211100, providing the mechanical stability needed to maintain uninterrupted suction and efficient debris removal throughout the cleaning cycle. Fabricated from wear-resistant materials, it holds up against wet conditions, suction forces, and the rigors of frequent...