Water Leveler Lid by CMP | White | Replacement Cover | 25504-000-010

Give your pool's water leveling system the reliable cover it deserves with the CMP Autofill Lid 25504-000-010. Finished in clean white and spanning 10 inches in diameter, this replacement lid is specifically shaped for CMP automatic water levelers that were produced prior to 2015. The 8-1/8-inch inner lip diameter provides a precise, wobble-free fit over the autofill mechanism, protecting internal parts from outdoor debris while...

1 lb. DE Powder Measuring Scoop - Orange | CMP 25600-009-000

Simplify your diatomaceous earth handling with the CMP DE Scoop, a bright orange measuring tool built to hold exactly 1 lb. of DE powder per scoop. Whether you're recharging your DE filter after a backwash or performing routine maintenance, this purpose-built scoop takes the guesswork out of dosing. Constructed from robust materials that resist cracking and wear, its eye-catching orange color makes it easy to...

Water Leveler Float Valve by CMP | 3/8" Brass | Auto Pool Water Fill | 25504-000-400

Never worry about dropping water levels again with the CMP Water Leveler Float Valve 25504-000-400, a solid brass replacement valve built exclusively for Aqualevel Water Levelers. Featuring a 3/8-inch MIP (Male Iron Pipe) threaded connection, this valve monitors your pool or spa water level and triggers an automatic refill whenever evaporation, splash-out, or backwashing draws the surface below the set point. The all-brass body resists...

White 175 GPM Main Drain Cover by CMP | Part 25215-000-000

Ensure powerful, consistent water circulation in your fiberglass pool or spa with the CMP Main Drain Cover 25215-000-000. Rated for flow rates up to 175 GPM, this white plastic suction drain cover features a 6-inch face diameter and a 2-inch slip connection, making it suitable for the vast majority of pool and spa plumbing configurations. Its tough construction withstands continuous exposure to treated water, and...

Grey 1.5" MIP Pool Bubbler by CMP | Part 25503-001-000

Add a tranquil, eye-catching water effect to your pool with the CMP 1.5" MIP Pool Bubbler 25503-001-000 in grey. Purpose-built for Natural Wonders Gunite Pool Fountains, this bubbler mounts completely flush with the pool floor so nothing protrudes above the waterline. It is perfect for animating shallow areas such as beach entries and sun shelves with a soft, cascading water dome. Connect it to an...

White 1.5" MIP Pool Bubbler by CMP | Part 25503-000-000

Transform your pool's shallow zones into a serene water feature with the CMP 1.5" MIP Pool Bubbler 25503-000-000 in white. Crafted for use with Natural Wonders Gunite Pool Fountains, this bubbler installs perfectly flush against the pool floor, keeping the surface smooth and unobstructed. It generates a calming bubble effect ideal for beach entries and sun shelves, and pairs beautifully with an air blower when...

Pool Deck Jet Water Fountain Nozzle | CMP 25597-000-900

Transform your poolscape with the CMP Swimming Pool Deck Jet Nozzle 25597-000-900, a fixed single-stream replacement nozzle built for CMP deck and wall jet assemblies. This nozzle produces a graceful, arching stream of water that launches from the pool deck or wall surface, creating an eye-catching water display that elevates any backyard setting. Engineered from chemical-resistant and weather-tough materials, it delivers dependable long-term performance without...

CMP 25565-009-000 Clear 3-Tier Pool Fountain - Decorative Water Feature

Transform your gunite pool into a serene oasis with the CMP Natural Wonders 3-Tier Fountain 25565-009-000. This beautifully layered water feature produces a timeless cascading display that elevates any pool setting -- from beach entries and tanning ledges to spa areas, sun shelves, and surrounding landscape elements. Crafted from transparent plastic, the fountain virtually disappears into its environment, letting the flowing water itself become the...

CMP 25597-200-900 Adjustable Deck Jet Flow Nozzle - Pool Water Feature Replacement

Fine-tune your in-ground pool's water display with the CMP Adjustable Deck Jet Nozzle 25597-200-900 from the acclaimed Natural Wonders collection. This precision-engineered nozzle grants complete command over both flow direction and stream trajectory, making it effortless to produce stunning arcing water features that bring your pool to life. Uniquely, the nozzle can be repositioned on the fly -- even while water is flowing -- so...

White Flush Mount Pool Return Fitting by CMP | 25555-000-000

Upgrade your pool's return system with the CMP Flush Mount Return Fitting in white, a refined plumbing component that delivers both form and function. Featuring a 1" Slip x 1-1/2" Insider connection, this fitting sits perfectly flat against the pool wall for a polished, unobtrusive appearance. The high-quality white finish not only complements a wide range of pool interiors but also stands up to prolonged...

Stainless Steel Pool Ladder Escutcheon Plate | CMP EP-100F | 25572-100-000

Add a sleek, finished look to your pool ladder or railing anchors with the CMP Stainless Steel Ladder Escutcheon 25572-100-000. This 5-inch round cover plate slips over standard 1.9-inch outer diameter tubing to conceal mounting flanges, bolts, and rough deck penetrations. Fabricated entirely from stainless steel, it resists rust and tarnishing in wet, chemical-heavy pool environments, giving your deck hardware a polished, professional appearance that...

6" Heavy Duty Plastic Ladder Rail Anchor Socket by CMP | 25572-600-000

Ensure your pool ladders and rails stay rock-solid with the CMP Heavy Duty Plastic Anchor Socket. This 6-inch in-ground anchor accommodates pool hardware with a 1.9-inch outer diameter, providing a stable mounting point that withstands years of use. The heavy-duty plastic body resists corrosion, chemical degradation, and UV damage that commonly affect anchoring hardware in wet pool environments. Whether you are installing a new ladder...

Non-Adjustable Deck Jet Assembly by CMP | Part 25597-000-000

Elevate your pool's visual appeal with the CMP Non-Adjustable Deck Jet Assembly 25597-000-000, a stunning water feature suitable for both residential and commercial installations. This complete assembly ships with the jet body, a fixed nozzle, and four interchangeable decorative caps in white, black, gray, and tan so you can match virtually any poolscape color scheme. Running on just 3-5 gallons per minute, the jet launches...

CMP 25597-200-000 Adjustable Deck Jet Assembly - Pool Water Feature Nozzle

Elevate your poolscape with the CMP Adjustable Deck Jet Assembly 25597-200-000, a versatile water feature kit that brings dynamic arcing streams to any pool environment. The complete assembly comes with the jet body, an adjustable nozzle capable of producing both single and dual stream patterns, and four interchangeable decorative caps in white, black, gray, and tan to coordinate with virtually any deck finish or pool...

Water Leveler Lid by CMP | Gray | Replacement Cover | 25504-001-010

Keep your automatic water leveler protected and looking sharp with the CMP Autofill Lid 25504-001-010. This gray, 10-inch diameter replacement cover is built to fit CMP automatic water levelers produced prior to 2015. Featuring an 8-1/8-inch inner lip diameter, it snaps firmly into position over the autofill mechanism, shielding delicate internal parts while delivering a polished poolside appearance. Crafted from UV-resistant material, this lid stands...

Water Leveler Lid by CMP | Tan | Replacement Cover | 25504-009-010

Restore the look and protection of your pool's automatic water leveler with the CMP Autofill Lid 25504-009-010. Available in a neutral tan finish, this 10-inch diameter replacement cover is purpose-made for CMP automatic water levelers manufactured before 2015. Its 8-1/8-inch inner lip diameter ensures a tight, stable seat over the autofill housing, guarding sensitive components against debris and the elements. Built from UV-resistant material, this...

Waterfall Rock & Debris Trap by CMP - Part 25577-950-000

Safeguard the plumbing behind your waterfall feature with the CMP Waterfall Rock and Debris Trap 25577-950-000. Purpose-built for use with CMP Natural Wonders Waterfalls, this inline trap intercepts rocks, leaves, and other large debris before they can lodge in the piping and restrict water flow. By catching obstructions at the source, it helps your waterfall run smoothly and reduces the likelihood of costly plumbing repairs....

Clear Pool Smart Scoop Leaf Skimmer | CMP 25600-411-000

Take the guesswork out of pool chemical dosing with the CMP Smart Scoop 25600-411-000. This transparent measuring tool holds more than six cups and features permanently molded measurement markings along with dosage guidelines for the most commonly used pool chemicals. The clear body lets you see exact fill levels at a glance, while its BPA-free, chemical-resistant construction ensures it holds up to repeated contact with...