Jandy 4-Function White Spa Side Remote 100 Ft Cable | 7441

The genuine Jandy 4-Function Spa Side Remote 7441 is a weatherproof control unit intended for above-water mounting on spa tile borders, pool decking, or adjacent outdoor surfaces. It delivers hands-on access to water temperature adjustments and additional spa functions, integrating effortlessly with AquaLink RS and PDA automation platforms. You can link as many as three remotes to a single AquaLink RS system, giving you the...

Jandy ePump Variable-Speed Pump Remote Controller - JEP-R

The Jandy ePump Remote Controller (JEP-R) puts full variable-speed pump management right at the equipment pad — no automation system required. This dedicated controller gives you hands-on access to critical pump parameters including speed adjustment, scheduling, and run-time programming, all through a sharp digital display and straightforward button interface. Housed in a weather-rated enclosure, the JEP-R is built to perform reliably through heat, rain, and...

Jandy TruDose pH Sensor R-Kit for Pool Chemical Controllers | R0894300

The Jandy R0894300 is a factory-original pH sensor R-Kit purpose-built for the Jandy TruDose Chemical Controller platform. As water flows through your pool plumbing, this sensor continuously reads pH levels and relays real-time data to the controller, enabling exact chemical dosing for consistently balanced water. Leveraging sophisticated pH and ORP measurement technology, it provides stable, trustworthy readings that keep your pool safe and inviting for...

Jandy TruDose Peristaltic Acid Pump for Pool Systems | R0945400

The Jandy R0945400 is a genuine peristaltic acid pump designed as a precision replacement for the Jandy TruDose Chemical Controller system. This pump handles the automated dispensing of muriatic acid, keeping your pool's pH within the ideal 7.2 to 7.6 range for clean, balanced water that is gentle on swimmers and equipment alike. Working hand in hand with the TruDose platform's pH and ORP sensing...

Jandy TruDose ORP Sensor R-Kit for Pool Chemical Controllers | R0894400

The Jandy R0894400 is an authentic ORP sensor R-Kit engineered exclusively for the Jandy TruDose Chemical Controller system. This sensor tracks oxidation-reduction potential in real time, providing continuous sanitizer-level feedback as water passes through your plumbing. By delivering precise, uninterrupted ORP data to the controller, it enables intelligent chemical dosing that keeps your pool water properly sanitized and crystal clear. Constructed for extended service life...

Jandy Pool Spa Bundle Pack IQ904-PS Automation System

The Jandy Pool and Spa Bundle Pack (IQ904-PS) delivers a complete automation system for pool and spa control. Features web-enabled connectivity for remote access, plus essential components for a streamlined setup. Designed for reliable performance, easy integration, and convenient control from your smartphone, tablet, or computer. Key Benefits Complete pool and spa automation solution Web-enabled control via smartphone, tablet, or computer Includes all major components...

Jandy TruDose Flow Switch for Pool Chemical Controllers | R0945100

The Jandy R0945100 is a genuine flow switch engineered as a core safety and operational component within the Jandy TruDose Chemical Controller system. By detecting active water circulation in your pool plumbing, this switch ensures that sanitizer and pH chemicals are dispensed only when flow is confirmed, preventing wasteful or potentially harmful dosing into stagnant water. Designed for seamless integration with the TruDose platform, it...

Jandy TruDose Chemical Controller Squeeze Tube 2-Pack | R0945200

The Jandy R0945200 is a factory-authorized 2-pack of replacement squeeze tubes designed for direct use with the Jandy TruDose Chemical Controller system. These tubes are the delivery mechanism through which chemicals are precisely metered into your pool or spa water, ensuring accurate, automated treatment that maintains optimal water quality. Engineered from durable materials that resist chemical degradation, they provide steady, uninterrupted flow throughout their service...

Jandy Pro Series Dual Style Sensor | Skimmer or Static Pipe Kit | 200 Foot Cord | S2046G

The OEM Jandy Pro Series Dual Style Sensor S2046G combines exceptional reach with precision water level detection, featuring a 200-foot cord and a dual-sensor architecture. Equipped with both a slip sensor and a half-moon sensor, this unit accommodates a wide variety of pool plumbing layouts and installation preferences. The slip sensor supports fast surface-mount setups, while the half-moon design locks into skimmers for highly accurate...

Jandy Pro Series Dual Style Sensor | Skimmer or Static Pipe Kit | 100' Cord | S2046C

The OEM Jandy Pro Series Dual Style Sensor S2046C delivers sophisticated water level monitoring through its innovative two-sensor configuration and 100-foot operational range. This versatile unit pairs a slip-style sensor with a half-moon sensor, giving installers the freedom to choose the mounting approach that best suits each pool's layout. The slip sensor works well for surface-mounted applications, while the half-moon component nestles securely inside a...

Jandy Universal Controller User Interface Panel | R3008800

Take command of your pool and spa automation with the genuine Jandy R3008800 Universal Controller User Interface. Fully compatible with Jandy Aqualink RS and PDA systems, this sophisticated control panel puts temperature regulation, lighting control, and filtration management at your fingertips. Its sleek, contemporary layout and user-friendly menu structure provide complete customization of schedules and pool features for a tailored experience. Engineered for effortless integration...

Jandy VAC Transformer R0466400 | 120V/24V for Pool & Spa Control Systems

The Jandy R0466400 Transformer is a factory-original power supply component purpose-built for Jandy AquaLink RS, JI, and AquaSwitch pool and spa automation systems. This transformer steps down standard 120 VAC household current to 24 VAC, providing the precise low-voltage power that the control system electronics require for stable, safe operation. Engineered to conform to OEM quality benchmarks, it serves as the essential link between your...

Jandy 3HP Relay with Harness R0658100 | For AquaLink & Power Center Systems

The Jandy Relay with Harness R0658100 is a genuine OEM 3HP-rated switching component designed to control high-draw pool and spa equipment through Jandy Aqualink Control Systems. This relay manages the electrical load for pumps and other motorized devices, enabling automated scheduling and operation via compatible control centers. The pre-wired harness is included for rapid hookup, making the R0658100 a practical upgrade or replacement solution for...

Jandy AquaLink RS OneTouch Indoor Control Panel | White | 7953

Take command of your entire pool and spa system from inside your home with the genuine Jandy AquaLink RS OneTouch Indoor Control Panel. This wall-mounted interface puts up to 32 automated pool and spa functions at your fingertips through an intuitive, menu-driven navigation system. From adjusting water temperature and scheduling filtration cycles to activating lighting and controlling pumps, every aspect of your aquatic setup is...

Jandy AquaLink Multiplex Printed Circuit Board | 6584

The genuine Jandy AquaLink Multiplex PCB 6584 is a replacement circuit board engineered for AquaLink RS pool and spa automation systems. It is particularly recommended when more than two wires must be connected into the terminals of a red 4-pin connector, ensuring clean and dependable signal transmission throughout the control network. Built for longevity, this board integrates seamlessly and maintains consistent performance over its service...

Jandy Spa Side Remote 4-Function for AquaLink Systems | Grey | 100 Ft | 8049

Control your spa without leaving the water using the genuine Jandy 8049 Spa Side Remote. This rugged, weather-resistant controller lets you operate up to four spa functions—including jets, lighting, and temperature settings—right from the spa edge. A generous 100-foot cable provides ample length for flexible mounting above the waterline on spa tile, adjacent decking, or nearby outdoor surfaces. Designed for direct integration with AquaLink RS...

Jandy AquaLink 4-Function White Spa Side Remote 150 Ft Cable | 7443

The genuine Jandy Spa Side Remote 7443 is a 4-function white controller built to work with AquaLink automation platforms, including both RS and PDA configurations. Equipped with a 150-foot cable, it puts convenient command over spa features like jet activation, lighting adjustments, temperature settings, and water effects right at your fingertips from the spa area. Its weatherproof housing mounts firmly above the waterline on tile...

Jandy CPU PCB Circuit Board R0466802 | AquaLink RS6 Control System Replacement

The Zodiac R0466802 CPU PCB Circuit Board is a factory-original electronic replacement module engineered exclusively for the Jandy AquaLink RS6 pool automation platform. This circuit board serves as the central processing hub, coordinating the operation of pumps, heaters, lighting fixtures, and other automated pool and spa functions. Manufactured with precision-grade electronic components, it delivers the processing stability required for dependable day-to-day system performance. Swapping in...

Jandy AquaLink Control System PCB – Pool Automation Circuit Board | PDA-P4

Take command of every aspect of your pool and spa with the OEM Jandy AquaLink PDA-P4, a wireless automation platform that puts pumps, heaters, lighting, and water features under one unified control hub. The included handheld wireless remote lets you adjust settings from anywhere within signal range without walking to the equipment pad. Built-in programmable scheduling automates recurring tasks such as filtration cycles and landscape...

Jandy AquaLink PDA-PS8 50-Pin CPU Board | R0586104

The genuine Jandy 50-Pin CPU Board R0586104 is a replacement circuit board for AquaLink PDA-PS8 automation systems, delivering centralized command over pool and spa equipment. It governs pumps, heaters, and lighting while offering seamless integration with Jandy e-Pumps and Pentair IntelliFlo variable speed pumps for superior energy savings. This board additionally provides salt chlorine generator management and intelligent lighting programming capabilities. Swapping in a new...