The Dyneson PCG-15 is a durable 1.5 HP single-speed replacement motor designed for Pentair SuperFlo and WhisperFlo pumps. Operating at 230 volts and 60 Hz, it produces 3450 RPM to keep pool and spa systems running efficiently. Built with a heavy-duty 56Y frame and square flange, this motor provides reliable installation and stability under demanding conditions. The almond-colored finish blends with existing equipment, and the two-year manufacturer warranty offers assurance of long-term performance. Replacing worn motors on schedule helps sustain water circulation, maintain efficiency, and extend the life of your Pentair pump.

Important Note: This motor cannot be used as a primary pool pump in the state of California due to state regulations on energy efficiency for pool equipment. Please verify local requirements before purchasing.

• Built for Pentair Pumps: The Dyneson PCG-15 is designed as a direct replacement for Pentair SuperFlo and WhisperFlo models, ensuring proper fit, accurate alignment, and dependable performance.

• Consistent Electrical Operation: Producing 1.5 HP at 3450 RPM, this single-speed motor operates on 230 volts at 60 Hz, supporting stable water flow across pool and spa circulation systems.

• Durable Frame & Mounting: Constructed with a 56Y frame and square flange, this motor is engineered for strength, secure installation, and reduced vibration during extended operation.

• Supports System Longevity: Replacing older motors with the PCG-15 helps maintain circulation efficiency, reduce system wear, and extend the overall life of pool and spa equipment.

• Manufacturer Warranty Coverage: Backed by a two-year warranty, the PCG-15 provides confidence in long-term durability and reliable performance under heavy use.

• Horsepower: 1.5
  
• Total Horsepower: 2.175
• Frequency: 60 HZ
• PH: 1
• Speed (RPM): 3450
  
• Voltage: 230

• Pentair SuperFlo Pumps
• Pentair WhisperFlo Pumps

Need help with the Dyneson 1.5 HP Single Speed Motor PCG-15 for Pentair SuperFlo and WhisperFlo pumps? This section answers common install, troubleshooting, and in-store fitment questions to ensure you get the right motor replacement.

Installing the PCG-15 Motor on Pentair Pumps

The PCG-15 uses a 56Y frame and square flange for direct drop-in replacement. Proper installation requires correct 230V wiring and alignment of the shaft seal to prevent leaks.

How to install Dyneson PCG-15 motor on Pentair WhisperFlo pump

Correct 230V wiring steps for PCG-15 on SuperFlo models

Do you need a new shaft seal when replacing with PCG-15 motor

Step by step guide to fitting PCG-15 into existing Pentair housing

Troubleshooting After Replacement

Leaks, noisy operation, or overheating are common concerns if installation isn’t done properly. These questions address typical problems after fitting a new motor.

Why is PCG-15 overheating after install on Pentair pump

WhisperFlo leaking after PCG-15 replacement what to check

How to test voltage supply for PCG-15 single speed motor

Do Pentair pumps need priming after new PCG-15 motor install

In-Store Availability and Fitment Help

Bring your old motor or pump model to confirm frame type and voltage before buying. Store staff can verify compatibility with Pentair SuperFlo and WhisperFlo systems.

Buy in store PCG-15 Dyneson motor for Pentair SuperFlo pumps

Walk in and compare PCG-15 with old WhisperFlo motor at the counter

Available locally PCG-15 replacement motor for Pentair pumps

Can in-store staff confirm PCG-15 compatibility for my pump