Pentair Pool Pump Motor Cover & Noise Reducer | R221016

Shield your pool pump motor from the elements and reduce operational noise with the genuine Pentair R221016 Motor Cover and Noise Reducer. This protective enclosure is fabricated from heat- and UV-resistant plastic, featuring a clean white top paired with black side panels that minimize heat accumulation while giving your equipment pad a tidy appearance. Inside, adjustable brackets accommodate most variable speed and single-speed residential pool...

400015Z Pentair Impeller Assembly | WhisperFloXF & IntellifloXF Pumps | 3 HP

Unlock the full hydraulic potential of your XF-series pump with the genuine Pentair WhisperFloXF Impeller 400015Z, a high-output component engineered for WhisperFloXF and IntelliFloXF Variable Speed 3 HP pumps. As a core element of Pentair’s XF Series lineup, this impeller is central to delivering the high flow volumes and precise water movement these pumps are known for, all while keeping operational noise to a minimum....

357102 Pentair WhisperFlo & IntelliFlo Pump Seal Plate Gasket | Almond

This genuine Pentair replacement seal plate gasket is purpose-engineered to preserve a secure, watertight connection within your Whisperflo and Intelliflo pump assembly. Manufactured from resilient, compression-resistant materials, this gasket delivers dependable leak prevention that keeps your pump operating at peak efficiency. Designed for quick, uncomplicated installation, this replacement gasket helps safeguard pump longevity and sustain optimal water circulation for your pool or spa. Key Benefits...

Pentair WhisperFlo & IntelliFlo Volute Pot with Seal Plate Kit — Part 357149

Overhaul the entire wet end of your WhisperFlo or IntelliFlo pump with the genuine Pentair Volute Pot and Seal Plate Kit, part number 357149. This comprehensive package bundles the pump housing, strainer basket, lid with O-ring, seal plate with gasket, locking ring, mounting hardware, and drain plug into a single order. Together, these components form the watertight chamber where suction, pressurization, and water routing occur....

356197 Pump Seal Quick-Kit | Pentair SuperFlo & SuperMax Pool Pump Go-Kit

Restore your pump's watertight integrity with the Pentair Quick-Kit 356197, a complete seal and gasket package built exclusively for SuperFlo and SuperMax series pumps. Every piece in this kit is an authentic Pentair component, precision-manufactured and rigorously tested at the factory to meet original equipment standards. Whether you are performing scheduled preventive maintenance or addressing an unexpected leak, this all-in-one solution delivers the dependable fit...

352401 Pentair IntelliFlo Pool Pump Motor Fan Kit Replacement

Protect your investment in variable speed pump technology with the Pentair Motor Fan Kit for Intelliflo pumps. This kit delivers a purpose-built, high-durability cooling fan that actively draws heat away from the motor housing during operation, keeping internal temperatures well within safe operating limits. Proper motor cooling translates directly into lower energy consumption, reduced component stress, and a significantly longer motor lifespan. Designed for quick,...

410016Z Pentair Diamond Seal Union Gasket 2 Pack | WhisperFloXF & IntelliFloXF Pump

Stop union leaks at the source with the Pentair Union Diamond Seal Gasket (410016Z), a 2-pack of precision-formed seals engineered for WhisperFloXF and IntelliFloXF pumps. These diamond-profile gaskets compress evenly between the union and pump housing, creating a complete watertight barrier that eliminates dripping and preserves full system pressure. Formed from advanced polymer compounds that resist compression set, chemical attack, and temperature fluctuation, each gasket...

356238Z Pentair IntelliFlo 3.0 VSF VS+SVRS Pump Diffuser

Maintain top-tier circulation performance with the OEM Pentair 356238Z Diffuser, a precision replacement part designed for IntelliFlo 3.0 VSF and VS+SVRS variable speed pool pumps. By channeling water efficiently through the pump housing, this diffuser supports both energy conservation and extended equipment service life. It is specifically intended for pumps manufactured after October 2020, providing assured compatibility with current production models. Replacing the diffuser at...

Pentair 2" Slip Half Union PKG 188Z – Durable Pool Plumbing Fitting

The Pentair 2" Slip Half Union PKG 188Z is a genuine Pentair plumbing fitting designed for secure 2" slip connections in pool and spa systems. Built with durable materials and precision tolerances, this half union ensures a tight, leak-resistant seal for long-term performance in residential and commercial pool applications. Key Benefits Secure 2" slip connection for reliable plumbing Genuine Pentair replacement part Leak-resistant design for...

Dyneson 0.75 HP Replacement Motor for Pentair SuperFlo & WhisperFlo | 355008 PCG-075

The Dyneson PCG-075 is a robust 0.75 HP single-speed motor engineered as a direct drop-in replacement for Pentair SuperFlo and WhisperFlo pump systems. Running on 115/230 volts at 60 Hz, this motor provides unwavering power output for dependable pool and spa water circulation day after day. The 56Y frame paired with a square flange mounting configuration ensures rock-solid attachment and vibration-free operation even in harsh...

Dyneson 2 HP Pool & Spa Motor – SuperFlo & WhisperFlo Replacement 355014 | PCG-20

The Dyneson PCG-20 brings 2 HP of single-speed muscle to your Pentair SuperFlo or WhisperFlo pump, spinning at 3450 RPM on 230 volts and 60 Hz to deliver the forceful water movement that larger pools and demanding spa systems require. Anchored by a reinforced 56Y frame and square flange, this motor maintains rock-solid stability and quiet operation throughout prolonged run cycles. Its almond finish matches...

Dyneson 1.5 HP Replacement Motor for Pentair SuperFlo & WhisperFlo | 355012 PCG-15

Upgrade your Pentair SuperFlo or WhisperFlo pump with the Dyneson PCG-15, a high-output 1.5 HP single-speed motor that delivers 3450 RPM on 230 volts at 60 Hz for powerful, uninterrupted pool and spa circulation. Engineered around a heavy-duty 56Y frame with square flange mounting, this motor locks securely into position and operates with minimal vibration, even under sustained heavy-duty conditions. The almond exterior finish coordinates...

Dyneson 1 HP Replacement Motor for Pentair SuperFlo & WhisperFlo | 355010 PCG-10

The Dyneson PCG-10 is a heavy-duty 1 HP single-speed replacement motor built to restore full power to Pentair SuperFlo and WhisperFlo pool and spa pumps. Rated for 115/230-volt, 60 Hz, single-phase service at 3450 RPM, this motor delivers the consistent rotational force needed for strong water circulation. A 56Y frame with square flange mounting anchors the motor firmly in place, while durable internal components are...

17307-0111S Pentair Max-E-Pro Pump Trap Cover Lid Assembly Replacement

Bring your Max-E-Pro pump back to full working order with this premium Pentair Trap Cover Replacement Lid Assembly. Manufactured to exacting standards for a precise, gap-free fit, this assembly restores reliable sealing to your pump's strainer housing and revitalizes water flow throughout your circulation system. Constructed from rugged, UV-stabilized materials, it delivers lasting resilience against the harsh conditions found in pool and spa environments. Key...

356198 Pump Seal Set Kit by Pentair | WhisperFlo & IntelliFlo Pool Pump Replacement

Stop leaks and restore your pump's watertight integrity with the genuine Pentair Pump Seal Set Kit 356198, precision-matched for WhisperFlo and IntelliFlo pumps. This comprehensive seal kit features premium-grade sealing components that form a tight, leak-proof barrier, safeguarding internal motor parts from water intrusion. Packaged with clear, step-by-step instructions, the kit is designed for straightforward DIY replacement, getting your pump back to peak operating condition...

355612 Pentair Sta-Rite SuperMax Pump Black Seal Plate Replacement

Restore a watertight pump housing with the genuine Pentair Black Seal Plate Replacement 355612, factory-matched for Sta-Rite Supermax and SuperFlo pool pumps produced before 6/17/19. This molded seal plate sits between the pump housing and motor mount, creating an airtight barrier that eliminates suction leaks and keeps priming consistent. Precision-formed from a resilient, chemically stable material, it holds its dimensional accuracy over thousands of operating...

070429 Pentair IntelliFlo WhisperFlo & Sta-Rite SuperMax Seal Plate Short Bolt | 3/8-16 x 1-1/8"

This Pentair Short Bolt for IntellFlo, WhisperFlo, and Sta-Rite SuperMax Seal Plate measures 3/8-16 x 1-1/8" and is purpose-engineered for secure, long-lasting fastening across multiple pump platforms. Crafted from high-grade stainless steel, this bolt delivers superior corrosion resistance and robust holding strength, making it an ideal replacement for maintaining the structural integrity of your pump's seal plate assembly. Key Benefits Premium Stainless Steel Construction: Manufactured...

17351-0101S Pentair IntellifloXF Variable Speed Pump Shaft Seal Replacement

Keep your pump running leak-free with the genuine Pentair 17351-0101S Shaft Seal. Engineered as a factory-authorized replacement for the IntellifloXF, WhisperfloXF, and Sta-Rite IntelliproXF Variable Speed Pumps (both pre- and post-August 2015 production), this carbide seal delivers exceptional hardness and wear resistance. It also serves as a direct substitute for the discontinued 37400-0028S and 37400-0027S seals, giving you a straightforward upgrade path without any modifications....

Pentair 350090 Cam and Ramp Clamp | SuperFlo Pump Lid Clamp Replacement

Lock your Superflo pump's wet end together with confidence using the genuine Pentair Cam and Ramp Clamp, model 350090. This single-piece clamping band wraps the joint between the strainer pot and volute, applying uniform compression that creates a leak-proof seal across the full circumference. The integrated cam lever lets you tighten or release the clamp by hand, eliminating the need for wrenches during routine basket...

350091 Pump Lid Replacement | Pentair SuperFlo & SuperMax Pool Pump Cover

This OEM Pentair replacement pump lid, part number 350091, is precision-engineered to fit SuperFlo, SuperFlo VS/VST, SuperMax, and SuperMax VS inground pool and spa pumps. It delivers a tight, reliable closure that prevents both water and air from escaping, protecting pump performance and energy efficiency. Constructed from tough, transparent plastic, the lid provides instant visual access to the strainer basket so you can assess debris...