370406Z Pentair Kreepy Krauly Platinum Cleaner Wide Wheel Replacement

Give your Kreepy Krauly Platinum pool cleaner renewed agility and surface coverage with the genuine Pentair Wide Wheel 370406Z. This bearingless wide-profile wheel is molded from robust, premium-grade materials selected for their resistance to chemical wear, abrasion, and UV exposure in submerged pool conditions. The wide footprint distributes weight evenly across pool surfaces, enabling your cleaner to glide fluidly over tile, plaster, fiberglass, and vinyl...

37337-6080 Pentair Impeller Lock Screw | WhisperfloXF & IntellifloXF Pump Part

The Pentair 37337-6080 impeller lock screw is a factory-original fastener engineered exclusively for WhisperfloXF and IntellifloXF pump platforms. This precision-machined screw anchors the impeller firmly onto the motor shaft, preventing rotational slippage and guaranteeing consistent hydraulic output. Fabricated from corrosion-resistant, industrial-grade materials, it thrives in the harsh chemical and moisture conditions found in pool equipment environments. Replacing a worn lock screw with this genuine Pentair...

38000-0007S Thermal Regulator by Pentair | MasterTemp & Max-E-Therm Heater Part

Restore proper temperature control to your pool or spa heater with the Pentair Thermal Regulator 38000-0007S, shipped with an included spring clip for quick installation. This factory-grade replacement component is precision-engineered to integrate directly into Pentair Sta-Rite Max-E-Therm pool and spa heaters, and it also works seamlessly with Pentair MasterTemp pool and spa heater models. By regulating the temperature output of your heating system, this...

3HP Replacement Impeller for Pentair WhisperFlo & IntelliFlo Pumps | PC&G PCG073131

Restore peak hydraulic output with the PC&G 3HP Impeller, model PCG073131, precision-engineered to fit Pentair Whisperflo and Intelliflo pump platforms. This performance-grade impeller drives water through the pump volute with maximum efficiency, boosting circulation rates and promoting superior water turnover throughout your pool. Built from resilient, corrosion-resistant materials, it is designed to endure the chemical and mechanical stresses of continuous pool pump operation. Swap in...

3HP WhisperFlo & IntelliFlo Diffuser With O-Ring by Swimables | 072928 | SW-21-930

Restore peak pump performance with the Swimables Diffuser with O-Ring SW-21-930, a precision-engineered replacement part tailored for 3 HP Pentair WhisperFlo and IntelliFlo pool and spa pumps. This component serves as a direct substitute for part number 072928, working to maximize water flow and pressure regulation for consistently strong operation. Packaged with an O-ring that provides a watertight, drip-free connection, it also incorporates integrated stainless...

3in Tab Chemical Dispenser with Built-In Thermometer by Pooline | #11063T

Simplify your pool or spa sanitation routine with the Pooline Chemical Dispenser 11063T. This floating dispenser accommodates 3-inch chlorine or bromine tablets and releases sanitizer gradually, keeping chemical levels stable between maintenance sessions. A built-in thermometer displays the current water temperature at a glance, giving you the data you need to fine-tune your chemical dosing on the spot. Twist the adjustable flow control ring to...

4" Female-to-Female Hose Adapter for Pentair Sectional Pool Hose | K21241B

The Pentair Female to Female Hose Adapter 4" K21241B is a purpose-built connector designed to join two sectional hose sections together in pool plumbing systems. This adapter creates a secure, leak-resistant bond between hose ends, maintaining consistent water flow throughout your pool maintenance setup. Constructed from robust materials that withstand prolonged exposure to pool water and chemicals, it delivers reliable service season after season. Whether...

4" Female-to-Female Sectional Hose Adapter by Pooline | #11252B-Short-F/F

Connect sectional pool hoses with confidence using the Pooline Female to Female Hose Adapter 11252B-Short-F/F. This 4-inch adapter is precision-molded for pool plumbing applications, creating a leak-proof junction between two male-ended hose sections. High-grade materials resist chemical degradation and withstand the pressures of active pool circulation systems, ensuring a dependable connection that holds up over time. Quick to install and requiring no special tools, it...

4" White Schedule 40 PVC Pipe - 10 Ft Pool Plumbing Pipe

Built right here in the USA, this 4-inch Schedule 40 White PVC Pipe delivers outstanding dependability for a wide range of plumbing and irrigation projects. Engineered to perform in residential and commercial settings alike, it provides superior resistance to chemicals and holds up under the water pressure demands of pool, spa, and general water distribution systems. The polished interior wall cuts down on friction loss,...

4' Automatic Pool Cleaner Sectional Leader Hose – Forest Gray | LEADAPC204W | Swimables SW-64-200

Connect your automatic pool cleaner to the skimmer or suction port with confidence using the Swimables SW-64-200 Sectional Leader Hose. This 4-foot forest gray hose segment is manufactured in the USA from heavy-duty, flexible material that resists kinking and UV degradation. Designed as a universal leader connector, it works with the vast majority of suction-side pool vacuums on the market, so you do not have...

400-5090 Waterway Self-Aligning Union Assembly | 2"S x 2"S Pool Plumbing

The Waterway 400-5090 Union Assembly is a factory-original 2-inch slip PVC union connector built for dependable plumbing joints in pool and spa circulation networks. Its self-aligning construction compensates for slight pipe offset during hookup, delivering a snug, leak-resistant connection every time. Made from impact-resistant, pool-grade PVC, this union handles the continuous pressure, moisture, and chemical exposure that pool equipment plumbing demands. A precision-machined O-ring seal...

400002 Pentair WhisperFloXF & IntelliFloXF Pump Seal Plate Replacement

The Pentair Seal Plate, model 400002, is a precision-crafted component built for WhisperfloXF and IntellifloXF pump systems. This high-grade plate delivers an exact fit and creates a secure, leak-proof junction between the pump housing and motor, safeguarding against water loss while keeping your pump running at peak efficiency. Fabricated from tough, pool-environment-rated materials, it stands up to prolonged exposure to water and chemicals without degradation....

400006 Pentair WhisperFloXF & IntelliFloXF Lid and Locking Ring Assembly

Restore the sealing integrity of your WhisperfloXF or IntellifloXF pump with the Pentair 400006 Lid and Locking Ring Assembly. This factory-original replacement pairs a transparent, impact-resistant lid with a heavy-duty locking ring to provide a watertight closure and unobstructed visual access to the strainer basket. The assembly is constructed from robust, pool-grade materials engineered to resist chemical degradation and UV exposure, maintaining dependable performance season...

400007Z Pentair WhisperfloXF & IntellifloXF Pump Strainer Basket Replacement

Guard the heart of your high-flow pump system with the Pentair Basket, model 400007Z, precision-molded for WhisperfloXF and IntellifloXF pump platforms. This oversized strainer basket intercepts leaves, twigs, and fine particulate before they ever reach the impeller, preserving hydraulic efficiency and preventing premature wear. Formed from a rigid, UV-stabilized material, the basket resists warping, cracking, and chemical degradation even after extended exposure to treated pool...

400010 Pentair WhisperFloXF & IntelliFloXF Pump Diffuser | 3HP

Maximize the hydraulic performance of your high-capacity pool pump with the Pentair Diffuser, model 400010, built specifically for WhisperfloXF and IntellifloXF 3HP pump systems. This diffuser precisely guides incoming water into the impeller, creating smooth flow dynamics that translate into superior pump output. Manufactured from premium, pool-rated materials, it handles the continuous operating demands of commercial and residential pool environments alike, providing dependable service over...

400015Z Pentair Impeller Assembly | WhisperFloXF & IntellifloXF Pumps | 3 HP

Unlock the full hydraulic potential of your XF-series pump with the genuine Pentair WhisperFloXF Impeller 400015Z, a high-output component engineered for WhisperFloXF and IntelliFloXF Variable Speed 3 HP pumps. As a core element of Pentair’s XF Series lineup, this impeller is central to delivering the high flow volumes and precise water movement these pumps are known for, all while keeping operational noise to a minimum....

400031Z Pentair WhisperFloXF & IntelliFloXF Seal Plate Kit with Mechanical Seal and O-Ring

Get a complete sealing solution with the Pentair Seal Plate, model 400031Z, which comes bundled with a mechanical seal and O-ring for WhisperFloXF and IntelliFloXF pumps. This all-in-one assembly forms a secure, leak-proof barrier that protects against water loss while preserving your pump's hydraulic efficiency. Built from heavy-duty, pool-rated materials, the seal plate delivers sustained performance and dependability, helping maintain smooth pump operation and extending...

410016Z Pentair Diamond Seal Union Gasket 2 Pack | WhisperFloXF & IntelliFloXF Pump

Stop union leaks at the source with the Pentair Union Diamond Seal Gasket (410016Z), a 2-pack of precision-formed seals engineered for WhisperFloXF and IntelliFloXF pumps. These diamond-profile gaskets compress evenly between the union and pump housing, creating a complete watertight barrier that eliminates dripping and preserves full system pressure. Formed from advanced polymer compounds that resist compression set, chemical attack, and temperature fluctuation, each gasket...

410020 Pentair Union Kit | WhisperFloXF & IntelliFloXF Pool Pump Plumbing

Set up or service your high-flow pump with ease using the Pentair Union Kit (410020), purpose-built for Whisperflo and IntelliFlo pumps. This comprehensive kit delivers professional-grade unions that lock onto your pump's inlet and outlet, forming airtight, drip-free connections that hold steady under sustained pressure and flow. Engineered to handle the rigors of outdoor pool environments, every component resists UV degradation, chemical exposure, and vibration-induced...

411-9100 Waterway 1.5" Sweep Elbow Fitting for Pool Plumbing

The Waterway Sweep Elbow 411-9100 is an OEM 1.5-inch PVC fitting crafted to deliver seamless directional changes within pool and spa plumbing lines. Featuring a 1.5-inch spigot connection on one side and a 1.5-inch slip socket on the other, this elbow integrates smoothly into conventional plumbing setups. Its gradual 90-degree sweep geometry minimizes friction losses and turbulent flow patterns, helping sustain steady water circulation throughout...